Dashboard EAX | Page 210 | Forex Factory

Options

Go to
Permalinks
Print Thread

Related Instruments

AUD/CAD, AUD/CHF, AUD/JPY, AUD/NZD, EUR/USD, CAD/CHF, CAD/JPY, CHF/JPY, EUR/AUD, EUR/CAD, EUR/CHF, EUR/GBP, EUR/JPY, EUR/NZD, GBP/AUD, GBP/CAD, GBP/CHF, GBP/JPY, GBP/NZD, GBP/USD, NZD/CAD, NZD/CHF, NZD/JPY, NZD/USD, USD/CAD, USD/CHF, USD/JPY, AUD/USD

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard EAX
Exit Attachments

Dashboard EAX

  • #4,181
  • Dec 21, 2016 2:18pm Dec 21, 2016 2:18pm
Quoting saown
{quote} Actually i want to know about PIN Number Input setting which will read the Data from the chart for better signal. EAX_Rangesv PIN Number= ? Eax Apr Ranges PIN Number= ? Pin mov average cross 28 pairs PIN Number= ? Dwm Ranges PIN Number= ? and so on......
so called PINS have on back the indicators.the pin number you set on the indicator pin sender must fit on pin # on eax and so you have direct signal right into EAX from that.simple.if this is what you ask.if for example EAX ma 28 cross pairs you put pin 1 then in eax if you enable pin 1 will get trades open when that Pin mov average cross 28 pairs will give signals for each pair.
Take what you can, give nothing back
  • #4,182
  • Dec 21, 2016 4:10pm Dec 21, 2016 4:10pm
Thank you, Hotpotato, for so many valuable contributions to this thread!
Wish you all the best and hope you will return soon!
  • #4,183
  • Edited Dec 22, 2016 6:06am Dec 21, 2016 5:09pm | Edited Dec 22, 2016 6:06am
A short update of post 3694. I am speaking about EAX_DWMRangesv1.01. For a more detailed explanation, see post 2680. The version I am using here is that of post 2692 (different of others with same title).
Setup is the same as described by AESEME in his post # 3017 of this thread (see parameters of the multipin in that post # 3017).
Other Dash parameters: only add if profitable; max. Orders per symbol (20); hold minutes since last open order (30 m); any entry on pins enabled; sessions: non-stop: 5 x 24 h. Also: filter Pivot TZ D1 enabled (10-10-10-10; true-true-true-true).

I began the 9th November with 0.01 lots (demo), but afterwards, since 21th November, I went to 0.05 lots because the DD was low at that time (beg your pardon, dear Husky!). Afterwards i got heavy drawdowns, up to 30%, quiet uncomfortable for live trading. So, 0.01 lots is more than enough for a deposit of 10000 $. Enough to make some 4-5% profit monthly (with that you sure could get wealthier than Warren Buffet!).
Profit factor: 2.23
Currently, I am doing basket profit trailing with MPTM (from $300, 75%), but many trades are closed by the built-in exit trigger of the strategy.
At this moment, the floating profit/loss is -1135 $ (trading is hard!). The realized (banked) profit is $5813 (19036,40 nett pips) for a deposit of $10000 (58% realized profit since 9th November ).
Maybe you remember that this strategy trades almost only in long fashion. Till now: 1301 longs for only 4 shorts.
I dont recommend anything. For information only!
Attached Image (click to enlarge)
Click to Enlarge Name: Profit.jpg Size: 75 KB
  • #4,184
  • Dec 21, 2016 5:15pm Dec 21, 2016 5:15pm
Hi, AESEME, thank you for the last update of the Dash!
Sorry if my question is already answered, but could you explain the meaning of this new (¿?) feature of last update (in pin chapter):

"trigger_PIN_ExitOnly Xing"
  • #4,185
  • Dec 21, 2016 5:32pm Dec 21, 2016 5:32pm
Quoting Ragusa
A short update of post 3694. I am speaking about EAX_DWMRangesv1.01. For a more detailed explanation, see post 2680. The version I am using here is that of post 2692 (different of others with same title). Setup is the same as described by AESEME in his post # 3017 of this thread (see parameters of the multipin in that post # 3017). Other Dash parameters: only add if profitable; max. Orders per symbol (20); hold minutes since last open order (30 m); any entry on pins enabled; sessions: non-stop: 5 x 24 h. I began the 9th November with 0.01 lots (demo),...
very interesting,still some DD to think about it.i know one thing if bellow 10k real account you switch from 0.01 up and risk more and trade baskets with 28 pairs youre on the way to become poor step by step.for my experience till now i learned to not accept DD bigger than 10%.when get's bigger there can be disturbing problems in the future.
but really thx for your report.apreciated
Take what you can, give nothing back
  • #4,186
  • Dec 21, 2016 5:35pm Dec 21, 2016 5:35pm
Quoting jamesT.
I want to share some insights from me of this week. I found out that the Hawkeye Fatman indicator is one of the best currency strength indicators and you can trade with success currency baskets with it. I use it on the 15 min chart. Look if you are in one of the three trading sessions (Tokio 0.00 GMT - 8.00 GMT / London 8.00 GMT - 12.00 GMT/ NY 13.00 GMT - 17.00 GMT) Look if the Hawkeye Fatman indicator tells you that a currency is overbought on the top of the indicator or oversold on the bottom of the indicator and you wait for an angle (reversal)....
DOes the hawkeye basket trade for you and how long have you been doing this?
  • #4,187
  • Dec 21, 2016 6:26pm Dec 21, 2016 6:26pm
Quoting Ygr
{quote} DOes the hawkeye basket trade for you and how long have you been doing this?
As I has write, I'm testing this since last week. The tests in this week ended every day with green pips.
  • #4,188
  • Dec 21, 2016 6:36pm Dec 21, 2016 6:36pm
Quoting Husky77
got this from HP. really sorry. Hotpotato Can you post this for me on the EAX thread Dec 20, 2016 1:30 My friends, I am sorry to have to say this but i am forced to leave FF. In their ultimate wisdom the moderators of Forex Factory have decided to qualified me as a commercial FF member and thus denied me access to all topics i did not start myself. Although i was very carefull not to point or link to commercial topics i must have made a mistake. I am still able to read topics but without the ability...
I hope hotpotato will soon come back, he's one of the best coder here on FF and he did make so far a very good job for this thread.
  • #4,189
  • Dec 21, 2016 7:59pm Dec 21, 2016 7:59pm
Quoting saown
{quote} Actually i want to know about PIN Number Input setting which will read the Data from the chart for better signal. EAX_Rangesv PIN Number= ? Eax Apr Ranges PIN Number= ? Pin mov average cross 28 pairs PIN Number= ? Dwm Ranges PIN Number= ? and so on......
Yeas that was my initial questions too:
Some more info on here :
Answer given by catalin68 - for ex: i was keeping the MaDdash on Pin 1-2 ans he said main signal of Eax must be on 1-2
or it will be chaotic and confused, so i changed checked it and rechanged again with different settings etc..
http://www.forexfactory.com/showthre...71#post9340571
Some more info on here by the greatly missed Hot Potato
(4,064) http://www.forexfactory.com/showthre...13#post9343313
(post 3,344) http://www.forexfactory.com/showthre...80#post9252380
(post 3,441) http://www.forexfactory.com/showthre...27#post9259827
EAX_APRangesv1.02 before was using the open/close and then Hp changed it to H/L.Difference showed on charts...
http://www.forexfactory.com/showthre...72#post9217472
Ragusa Access panel details inputs (move to 11)
http://www.forexfactory.com/showthre...91#post9216391
Ragusa These are for DWMRanges v1.00 multipair> (sub-cat-11)
http://www.forexfactory.com/showthread.php?p=9216394#post9216394
But I'd better send you a word doc that i saved as personal notes
Take care
Attached File(s)
File Type: docx EAX Beauty details.docx   19 KB | 677 downloads
The arriving better than the arrival, the journey has just started
  • #4,190
  • Dec 21, 2016 8:05pm Dec 21, 2016 8:05pm
Ggrrhhhh sorry, just realised that the word doc i have sent, has the initial notes a little confused
and i got better notes on the desktop pc, i am on laptop now. There are still links that can be useful
to what you like to know, pls take what you feel is good for you and ignore some other notes,
again apology i must be tired it's 2am / Salut
The arriving better than the arrival, the journey has just started
  • #4,191
  • Dec 22, 2016 4:53am Dec 22, 2016 4:53am
Hello all master ,

Can any one coding pin for csDash.ex4

So I auto trade with csDash.ex4 indicator alert .

Sorry for my bad English.


Thanks In Advance.
  • #4,192
  • Dec 22, 2016 6:12am Dec 22, 2016 6:12am
Sorry, I forgot a parameter in setup of post 4183 (filter pivot TZ D1). Look into it, it is already added.
  • #4,193
  • Dec 22, 2016 8:24am Dec 22, 2016 8:24am
Ragusa many thanks for your update. Would it be possible that you share your setfiles for the dashboard and MPTM?

Quoting Ragusa
Sorry, I forgot a parameter in setup of post 4183 (filter pivot TZ D1). Look into it, it is already added.
  • #4,194
  • Dec 22, 2016 9:38am Dec 22, 2016 9:38am
Quoting Murysco
{quote}
Hello Aeseme, thanks for the new update... very useful and meaningful additions.
Can we please have separate settings for each TF on HAS module? E.g the shift, cross/direction, also if possible, exit on opposite signal.
I could have used the HAS PIN to achieve my aim but it is not possible to open 28charts for each of the TF I want to use.
Thanks for everything you're doing for the community. Cheers MM.
I have something like this in the oven since some time but it requires some work yet.
Have you already read the #Post 1 of this thread yet?
  • #4,195
  • Dec 22, 2016 9:38am Dec 22, 2016 9:38am
Quoting Ragusa
Hi, AESEME, thank you for the last update of the Dash! Sorry if my question is already answered, but could you explain the meaning of this new (?) feature of last update (in pin chapter): "trigger_PIN_ExitOnly Xing"
It's a testing preset that I forgot to add a comment for (or remove as input), and it's intended to change the PIN arrow and color when a PIN is used only as exit.
Have you already read the #Post 1 of this thread yet?
  • #4,196
  • Edited 4:36pm Dec 22, 2016 9:38am | Edited 4:36pm
Quoting patel879
Hello all master , Can any one coding pin for csDash.ex4 So I auto trade with csDash.ex4 indicator alert . Sorry for my bad English. Thanks In Advance.
Have you already read the first post?
Attached Image
Have you already read the #Post 1 of this thread yet?
  • #4,197
  • Dec 22, 2016 9:53am Dec 22, 2016 9:53am
Quoting jenbols
{quote} Yeas that was my initial questions too: Some more info on here : Answer given by catalin68 - for ex: i was keeping the MaDdash on Pin 1-2 ans he said main signal of Eax must be on 1-2 or it will be chaotic and confused, so i changed checked it and rechanged again with different settings etc.. http://www.forexfactory.com/showthre...71#post9340571 Some more info on here by the greatly missed Hot Potato (4,064) http://www.forexfactory.com/showthre...13#post9343313 (post 3,344) http://www.forexfactory.com/showthre...80#post9252380...
Quoting jenbols
Ggrrhhhh sorry, just realised that the word doc i have sent, has the initial notes a little confused and i got better notes on the desktop pc, i am on laptop now. There are still links that can be useful to what you like to know, pls take what you feel is good for you and ignore some other notes, again apology i must be tired it's 2am / Salut
There's a time window where you can edit your post, attachments included, BTW, I dunno how much time that time window lasts...
Have you already read the #Post 1 of this thread yet?
  • #4,198
  • Dec 22, 2016 9:57am Dec 22, 2016 9:57am
Ragusa, how did you solve the problem with EAX_DWMRangesv1.01? What version did you chose? The initial one traded only in Long. The last one (from HP) gave a signals in both directions. But I stopped testing with DD- 40%, Lot -0.05, Dash without PTZ.
  • #4,199
  • Dec 22, 2016 2:16pm Dec 22, 2016 2:16pm
Hi. Please help.


NZDUSD sell trade why not close?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 899 KB
  • #4,200
  • Dec 22, 2016 2:48pm Dec 22, 2016 2:48pm
Quoting little1hu
Hi. Please help. NZDUSD sell trade why not close? {image}
cos you dont have ''close'' button enabled.
Take what you can, give nothing back
59 traders viewing now