Dashboard EAX | Page 203 | Forex Factory

Options

Go to
Permalinks
Print Thread

Related Instruments

AUD/CAD, AUD/CHF, AUD/JPY, AUD/NZD, EUR/USD, CAD/CHF, CAD/JPY, CHF/JPY, EUR/AUD, EUR/CAD, EUR/CHF, EUR/GBP, EUR/JPY, EUR/NZD, GBP/AUD, GBP/CAD, GBP/CHF, GBP/JPY, GBP/NZD, GBP/USD, NZD/CAD, NZD/CHF, NZD/JPY, NZD/USD, USD/CAD, USD/CHF, USD/JPY, AUD/USD

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard EAX
Exit Attachments

Dashboard EAX

  • #4,041
  • Dec 12, 2016 1:13pm Dec 12, 2016 1:13pm
So how are we doing with EAX_Ranges ?
Seems i didn't make any grave mistakes.
info@metacharttools,com
  • #4,042
  • Edited 1:58pm Dec 12, 2016 1:34pm | Edited 1:58pm
Quoting Hotpotato
So how are we doing with EAX_Ranges ? Seems i didn't make any grave mistakes.
I would have liked to say something, but I fail to make it to work and other than the default mode (reverse). So I returned immediately back to APRangesv 1.02. Sorry!
Attached Image (click to enlarge)
Click to Enlarge Name: GBPUSDM15.png Size: 58 KB
The road to success is always under construction !
  • #4,043
  • Dec 12, 2016 1:48pm Dec 12, 2016 1:48pm
Quoting Catalin68
{quote} I would have liked to say something, but I fail to make it to work and other than the default mode (reverse). So I returned immediately back to APRangesv 1.02. Sorry!
I think that the only pin that gives the signal you want (above or below) is debug pin 4.
So yes, you have to stick to APRanges.
info@metacharttools,com
  • #4,044
  • Dec 12, 2016 2:04pm Dec 12, 2016 2:04pm
Quoting Hotpotato
{quote} I think that the only pin that gives the signal you want (above or below) is debug pin 4. So yes, you have to stick to APRanges.
The strategy of adding positions and exit behind EAX_Rangesv can be good. But to be added to APRanges.
The road to success is always under construction !
  • #4,045
  • Edited 2:34pm Dec 12, 2016 2:23pm | Edited 2:34pm
This week I dropped EAX_DWMRanges and started tests with EAX_Ranges (#Post 4025) with default presets by now, and this is the current state of things so far:
Attached Image (click to enlarge)
Click to Enlarge Name: Image1.png Size: 77 KB

Those pips in the WEEKLY row are due to manual basket close earlier today
Attached Image (click to enlarge)
Click to Enlarge Name: Image2.png Size: 14 KB
Have you already read the #Post 1 of this thread yet?
  • #4,046
  • Dec 12, 2016 2:46pm Dec 12, 2016 2:46pm
Just FYI, there are fresh versions of MADdash and cDash with updated expiry date (Jun 30, 2017) in their respective threads...
Have you already read the #Post 1 of this thread yet?
  • #4,047
  • Dec 12, 2016 3:32pm Dec 12, 2016 3:32pm
Quoting aeseme
This week I dropped EAX_DWMRanges and started tests with EAX_Ranges (#Post 4025) with default presets by now, and this is the current state of things so far: {image} Those pips in the WEEKLY row are due to manual basket close earlier today {image}
To big losses i think.
I think the Stop Loss is probably a bit to wide, need to cut trades earlier without giving them them less room to breath to much.
info@metacharttools,com
  • #4,048
  • Dec 12, 2016 8:17pm Dec 12, 2016 8:17pm
cradle can i ask what you are using as a measure to exit trades? thanks

Quoting cradle
Hi, I must thank all the open minded people here on this forum for having developed such a beautiful and powerful dashboard. Special thanks to Aesme, kosomolate, JibalaPasan, dtlase, MARIALUIZA hotpotato, gvc, husky77, dingdong99, JamesT, and others. Forgive me if I have missed some but you people have done a great job in the development of these dashboard. After Casino died down, I felt stranded until someone pointed me out to this thread. Only to learn that any strategy that could be implimented on Seller9's (great teacher and coach) Casino, could...
  • #4,049
  • Dec 12, 2016 10:57pm Dec 12, 2016 10:57pm
First of all I would like to thanks aeseme jamest., catalin68, hotpotato, ragusa husky77 and all those are actively developing and optimizing this masterpiece .

I start reading from the first page and I been very fascinated from the amazing work you guys are doing , from some point I still a bit confuse by developments made so I decide to install the EAX and see how work and test it myself but I guess I may made something wrong because I don`t have any open or close transaction and I hope someone can helpunderstand where the problem is .

Just to recap a bit what I did in order to install the EAX after been watching the first page video

Downloaded the DBMASMEAX007a3.bundle3.zip
>> Unzipped and placed on the respective MT4 folder as the same structure
>>ForceLoadHistoricalData(ASM)
>>Open two unused pair and loaded MADdash(M1-D1_DefaultSolidCurrencyBlocks)EAXPIN.tpl with preset MADdash(M1-D1_DefaultSolidCurrencyBlocks).set as PIN1 and MADdash(M1-D1_DefaultConstantRowColor)EAXPIN.tpl with preset MADdash(M1-D1_DefaultConstantRowColor).set as PIN2
>> Open another unused pair and loaded DBMASMEAXPIN_BRdash_v004a(PIN3) + EAX_APRangesv1.02(addPin4)+EAX_MovingAveragesv1.00(EaxSignalPin 6)
>> Loaded DBMASMEAX007a3
>> applied to all PIN and EAX the set file JT setfiles.rar
check all Auto are active as well as csm is off but is not trading

Am I missing something ? Thx in advance

Am I missing something ?
  • #4,050
  • Dec 12, 2016 11:42pm Dec 12, 2016 11:42pm
Quoting stesy
First of all I would like to thanks aeseme jamest., catalin68, hotpotato, ragusa husky77 and all those are actively developing and optimizing this masterpiece . I start reading from the first page and I been very fascinated from the amazing work you guys are doing , from some point I still a bit confuse by developments made so I decide to install the EAX and see how work and test it myself but I guess I may made something wrong because I don`t have any open or close transaction and I hope someone can helpunderstand where the problem is . Just to...
is ok you took the bundle but you must take also last EAX update and use that one.then before to use settings from people is always better to try a simple step to conect Madash pin with eax pin just to see how things work if everything goes well then will be easy to use made settings.
so put one Madash instance on a chart,set a pin nr.and set same pin in EAX and see how is working while you play with Madash set to get some test trades open in EAX.
to work you must have Madash in PINS as a folder in your mt4 indicators folder.also Madash in combination with last APR might confuse you a lot as you must understand first how APR works and what pin's must be used.usual mistake when you start in this with last step instead to start from lesson 1.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_2.png Size: 80 KB
Take what you can, give nothing back
  • #4,051
  • Dec 12, 2016 11:53pm Dec 12, 2016 11:53pm
Quoting Husky77
{quote} is ok you took the bundle but you must take also last EAX update and use that one.then before to use settings from people is always better to try a simple step to conect Madash pin with eax pin just to see how things work if everything goes well then will be easy to use made settings. so put one Madash instance on a chart,set a pin nr.and set same pin in EAX and see how is working while you play with Madash set to get some test trades open in EAX. to work you must have Madash in PINS as a folder in your mt4 indicators folder.also Madash...
Thx husky77 I will follow your advice :-) and I will start from scratch
  • #4,052
  • Dec 13, 2016 12:03am Dec 13, 2016 12:03am
Quoting stesy
{quote} Thx husky77 I will follow your advice :-) and I will start from scratch
Quote
>>Open two unused pair and loaded MADdash(M1-D1_DefaultSolidCurrencyBlocks)EAXPIN.tpl with preset MADdash(M1-D1_DefaultSolidCurrencyBlocks).set as PIN1 and MADdash(M1-D1_DefaultConstantRowColor)EAXPIN.tpl with preset MADdash(M1-D1_DefaultConstantRowColor).set as PIN2
>> Open another unused pair and loaded DBMASMEAXPIN_BRdash_v004a(PIN3) + EAX_APRangesv1.02(addPin4)+EAX_MovingAveragesv1.00(EaxSignalPin 6)
>> Loaded DBMASMEAX007a3
>> applied to all PIN and EAX the set file JT setfiles.rar...

You did not include a screenshot of your settings but if you are using all these indicators at the same time you are mixing a couple of strategies together and i am pretty sure it will never trade.

Post a screenshot of you main EAX dashboard with the installed list of indicators open.
info@metacharttools,com
  • #4,053
  • Dec 13, 2016 12:43am Dec 13, 2016 12:43am
Hello Mates,

I have been testing around this amazing tool for a couple of days now and found out quite a few things on my own. But I seem that I cannot find the problem with the closing orders.

See the example on the attachement. On the Yellow Arrow the symbol is clearly getting the reverse signal, but the EA is not closing the order automatically. Do you know what could possibly be wrong there?

Thanks and may the green pips be with you!
Attached Image (click to enlarge)
Click to Enlarge Name: Sem Título.jpg Size: 544 KB
  • #4,054
  • Dec 13, 2016 1:26am Dec 13, 2016 1:26am
Quoting silazpt
Hello Mates, I have been testing around this amazing tool for a couple of days now and found out quite a few things on my own. But I seem that I cannot find the problem with the closing orders. See the example on the attachement. On the Yellow Arrow the symbol is clearly getting the reverse signal, but the EA is not closing the order automatically. Do you know what could possibly be wrong there? Thanks and may the green pips be with you! {image}
you have this ON , thats why RS opposite exit are ignored
Attached Image
Take what you can, give nothing back
  • #4,055
  • Dec 13, 2016 1:35am Dec 13, 2016 1:35am
Quoting Husky77
{quote} you have this ON , thats why RS opposite exit are ignored {image}
Does this mean only close profitable trades leaving the losing ones run ?
Even when from the same symbol ?

Doesn't sound like a good strategy too me.
info@metacharttools,com
  • #4,056
  • Dec 13, 2016 1:37am Dec 13, 2016 1:37am
Quoting Hotpotato
{quote} Does this mean only close profitable trades leaving the losing ones run ? Even when from the same symbol ? Doesn't sound like a good strategy too me.
very possible .still not understood that filter 100% as i never use it.
Take what you can, give nothing back
  • #4,057
  • Dec 13, 2016 1:45am Dec 13, 2016 1:45am
Quoting Husky77
{quote} very possible .still not understood that filter 100% as i never use it.
That is useful if you have problems in flat markets with fast closes in Strategy. That let more time for market take direction. Evidently you need sl for cover the worst scenario
Try don't lose pants never...
  • #4,058
  • Dec 13, 2016 1:55am Dec 13, 2016 1:55am
Quoting Husky77
{quote} you have this ON , thats why RS opposite exit are ignored {image}
Thank you Husky77, much appreciated

Quoting braintheboss
{quote} That is useful if you have problems in flat markets with fast closes in Strategy. That let more time for market take direction. Evidently you need sl for cover the worst scenario
Useful but very hard to make it work...

Is there any indi that works with EAX to make SL and trail it? I See that HotPotato EAXRanges has this option, but it will only work with opening positions with the PINS right? I'm still not adventuring myself on making PIN's work on this Dash since I'm still getting to know the core of it.
  • #4,059
  • Dec 13, 2016 2:18am Dec 13, 2016 2:18am
Noticed some profits slipping away so tightened up the defaults trailing a bit.
Attached Image (click to enlarge)
Click to Enlarge Name: profitslip.PNG Size: 13 KB


Removed some settings like Breakeven and reversed pin 1 signal because they are not applicable here.

Added some params

When to start and stop compounding trades.
Attached Image


And to remove or hold the been above/below signal at the end of a trade.
Turning off the signal on trade means that after the trade is closed (fi. on trailing) the same "price has been outside ranges" will not be used again.
So for a following trade in the same direction the price has to go outside the range first again.
This is reflected in debug pin 4.
Attached Image
Attached File(s)
File Type: ex4 EAX_Rangesv1.00.ex4   102 KB | 387 downloads
info@metacharttools,com
  • #4,060
  • Dec 13, 2016 3:26am Dec 13, 2016 3:26am
Quoting silazpt
{quote} Thank you Husky77, much appreciated {quote} Useful but very hard to make it work... Is there any indi that works with EAX to make SL and trail it? I See that HotPotato EAXRanges has this option, but it will only work with opening positions with the PINS right? I'm still not adventuring myself on making PIN's work on this Dash since I'm still getting to know the core of it.
On the thread a lot of universal trailers are mentioned but i think all of them have to run on a separate chart next to EAX.
info@metacharttools,com
5 traders viewing now