Menu
Sister Sites

Options

Bookmark Thread

First Page First Unread Last Page Last Post

Print Thread

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard EAX
Exit Attachments

Dashboard EAX

Quoting aeseme
{quote} {quote} #1 up there
I think my problem is English Absence is when you have neutral signal. New mode is when you have all pins neutral?
Try don't lose pants never...
Quoting braintheboss
{quote} I think my problem is English Absence is when you have neutral signal. New mode is when you have all pins neutral?

  1. Absence of signal is when there's no signal at all. I guess it can be what you call neutral signal, yes (and I remember that you wrote about having a neutral signal, and it seems it was already there undercover as absent . BTW, neutral sounds better that absent.. I'll think about renaming it... no promises though)
  2. Missing/lost signal is when the original signal (which originated the order) is not there anymore, it could be because it's opposite or absent.

Have you already read the #Post 1 of this thread yet?
Quoting aeseme
{quote} Absence of signal is when there's no signal at all. I guess it can be what you call neutral signal, yes (and I remember that you wrote about having a neutral signal, and it seems it was already there undercover as absent . BTW, neutral sounds better that absent.. I'll think about renaming it..) Missing/lost signal is when the original signal (which originated the order) is not there anymore, it could be because it's opposite or absent.
Ok. You are taking in consideration what pins were used for open trade. Interesting
Try don't lose pants never...
Quoting braintheboss
{quote} Ok. You are taking in consideration what pins were used for open trade. Interesting
Right..
Quoting aeseme
Quoting Hotpotato
Still not quite there in my view.
The "loss of signal" should imply "opposite signal".
If the original trade entry signal was a buy one could argue that the term "loss of signal" means no signal OR opposite signal seeing that both states mean that the original buy signal is lost.
The pin setting "loss of signal" i now really "No signal".
{image}{image}
Quoting Husky77
{quote} ''absence'' mean simple absence/nothing/no signal. usual before this new feature when we took a trade with presence of signal and then signal dissapeared nothing happen.but now when signal dissapear we have it as an exit option.in some cases can work well as exit.
Quoting Hotpotato
{quote}
Still can't use it unfortunately .
Got tri state exits meaing they can switch buy-nothing-sell but also buy-sell (no nothing).
That will take 6 pins 3 opposite and 3 absence so no room for entry.

  1. Add a 3rd. exit scope "missing/lost signal" (equivalent to loss of original signal, sort of "absent OR opposite")?
  2. Make absence into "absence OR opposite" (equivalent to read it as absence of original signal and not absence of signal as it is now)?
  3. Make "OR opposite" an option of "absence" (equivalent to choose absent signal meaning)?
  4. Drop "absence of signal" on behalf of "missing/lost signal"?
  5. ..... ?

Hotpotato advocated quite well the need of this exit option/scope ^
Have you already read the #Post 1 of this thread yet?
so we have now 2 in 1 in fact? initial started trade signal as opposite OR as lost ... in space
Take what you can, give nothing back
Quoting Murysco
{quote} Thank you so much for the update. Can we please have the option, instead of Hold MINUTES since last closed to be be in selectable TF candles? E.g : When a trade is closed, do not look for entry until the next M30 candle begins, not in minutes. Thank you MM
You have that option but as you said in some of your further posts/replies, the same time-frame is used either for open/close bar, and what you want is to have the option to choose a different time-frame for each hold scope.
It does makes sense and I've already considered that scenario (for bar time-frame and time scopes) but didn't implemented as of yet, mostly because of other things with higher priority.
Have you already read the #Post 1 of this thread yet?
Aesem one q
SL adr is present ADR value or previous day adr?
i ask because even with 75% adr sl i get invalid stops for some pairs.
Take what you can, give nothing back
Quoting Husky77
so we have now 2 in 1 in fact? initial started trade signal as opposite OR as lost ... in space
That's it
Time will tell if we do really need these 3 scopes or we can drop one...
Have you already read the #Post 1 of this thread yet?
Quoting Husky77
Aesem one q SL adr is present ADR value or previous day adr? i ask because even with 75% adr sl i get invalid stops for some pairs.
It's ADR(10).. present ADR by default is ADR(20)
Invalid stops are sometimes caused by high spread (price gets too close to stops).
Have you already read the #Post 1 of this thread yet?
Quoting aeseme
{quote} It's ADR(10).. present ADR by default is ADR(20)
oki thx
with 20 sl i get invalid stops on almost all pairs
Take what you can, give nothing back
Quoting aeseme
{quote} It's ADR(10).. present ADR by default is ADR(20)
Invalid stops are sometimes caused by high spread (price gets too close to stops).
Quoting Husky77
{quote} oki thx with 20 sl i get invalid stops on almost all pairs
BTW, just to clarify.. with ADR(10) I mean ADR of the last 10 days... ADR(20) of the last 20 days...
Have you already read the #Post 1 of this thread yet?
Quoting aeseme
{quote} {quote} BTW, just to clarify.. with ADR(10) I mean ADR of the last 10 days... ADR(20) of the last 20 days...
hahaha ok i still need a class lesson for this
and last q :
if i use rs or bqr as opposite will be also used their ''exit'' option in opposite way to comply with same ''reverse entry'' ?

for example:
i have a buy order open from another filters and pins.
and i set rs one value that at one point in normal (not reverse) conditions will show me green ''buy condition available''.
now... if i use reverse RS then this ''buy condition available'' must be an exit for my long order.
Take what you can, give nothing back
Quoting Husky77
{quote} hahaha ok i still need a class lesson for this
and last q :
if i use rs or bqr as opposite will be also used their ''exit'' option in opposite way to comply with same ''reverse entry'' ?
If nothing is broken, it should be that way, yes...
Have you already read the #Post 1 of this thread yet?
Do you know why the session management for US is closed ?

as attached my local time is 02:18 so US session should open. Can you help
Attached Image (click to enlarge)
Click to Enlarge Name: time.jpg Size: 34 KB
Quoting fxmini
Do you know why the session management for US is closed ? as attached my local time is 02:18 so US session should open. Can you help {image}
NY is green there. sessions are user customizable from eax inside settings panle,you must ON and OFF that. i suggest you open settings and scroll little by little until you get the stuff in there.
cheers!

LO till now
cdash d1. exit on opposite.later on i think trailing will be good. max 5 trades /pair.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_1.jpg Size: 438 KB
Take what you can, give nothing back
Quoting aeseme
{quote} Absence of signal is when there's no signal at all. I guess it can be what you call neutral signal, yes (and I remember that you wrote about having a neutral signal, and it seems it was already there undercover as absent . BTW, neutral sounds better that absent.. I'll think about renaming it... no promises though) Missing/lost signal is when the original signal (which originated the order) is not there anymore, it could be because it's opposite or absent.
info@metacharttools,com
For full renko (and other) support you could consider adding the following settings.

1) Expand the hold scope with "number of bars since last open"

This because the 4th bar of a renko (not time based) system means breakeven and almost curtain a continuation so you would like to add a trade there.

2) Have a separate user input "exclude pair list" for each of the sessions to exclude pairs from trading that session.

This will benefit all automatic trading styles by being able to expel non performing pairs from a session.
info@metacharttools,com
Quoting aeseme
{quote} Odd.. I made a few tests and I couldn't reproduce that at my end... BTW I'll keep an eye on that...
hm aeseme i notice that the "L|S" in the dash switch properly when i click somewhere in the chart. and when the chart is already "marked/activated" then i have to do some new action like maximize the chart. some funny stuff but maybe it helps you to find the problem...
Aesem, i have a .set always worked fine with old EAX builds. But in last I have problems with trades. I have Hold disabled ( all options ) but not opens trades when you have signals. It have long delay and I'm not sure when opens what is the reason.
Attached Image (click to enlarge)
Click to Enlarge Name: Captura de pantalla (232).png Size: 272 KB

I let you my settings
Attached File(s)
File Type: zip EAX.zip   4 KB | 380 downloads
Try don't lose pants never...
Quoting aeseme
{quote} If values are 0.0 it will reset... can you provide additional details?
for example, my orders now have no SP\TP.
I set SL\TP (ATR) 40\40 (no mater how, in setting or in form)
I click button SET TP > TP properly set.
Then i click SET SL > SL properly set, but TP cancel.
And vica versa.
0 traders viewing now