Dashboard EAX | Page 41 | Forex Factory

Options

Go to
Permalinks
Print Thread

Related Instruments

AUD/CAD, AUD/CHF, AUD/JPY, AUD/NZD, EUR/USD, CAD/CHF, CAD/JPY, CHF/JPY, EUR/AUD, EUR/CAD, EUR/CHF, EUR/GBP, EUR/JPY, EUR/NZD, GBP/AUD, GBP/CAD, GBP/CHF, GBP/JPY, GBP/NZD, GBP/USD, NZD/CAD, NZD/CHF, NZD/JPY, NZD/USD, USD/CAD, USD/CHF, USD/JPY, AUD/USD

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard EAX
Exit Attachments

Dashboard EAX

  • #801
  • Feb 16, 2016 6:53am Feb 16, 2016 6:53am
Hi brother aeseme, you are right, I mess up with settings. I reset to default and go through one by one, and now there is buy and sell position opened. And I believe GAP X as exit will works as well. Im sorry and thank you.
  • #802
  • Feb 16, 2016 6:56am Feb 16, 2016 6:56am
Aeseme when you have time can you try to reproduce this scenario?not sure why a new trade was taken before 15 min to pass.is set to take new only if in profit but H still must hold it for 15 min candle and 15 mintes since first order.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_2.jpg Size: 707 KB
Take what you can, give nothing back
  • #803
  • Feb 16, 2016 6:59am Feb 16, 2016 6:59am
Quoting nikajle
Hi brother aeseme, you are right, I mess up with settings. I reset to default and go through one by one, and now there is buy and sell position opened. And I believe GAP X as exit will works as well. Im sorry and thank you.
Glad to know it is doing well now
Have you already read the #Post 1 of this thread yet?
  • #804
  • Edited 7:41am Feb 16, 2016 7:23am | Edited 7:41am
Quoting Husky77
Aeseme when you have time can you try to reproduce this scenario?not sure why a new trade was taken before 15 min to pass.is set to take new only if in profit but H still must hold it for 15 min candle and 15 mintes since first order. {image}
You have "One order per candle bar" as a Hold[H] filter scope and M15 as candle time-frame.


By looking at these orders times:

  1. 2016.02.16 14:43:17 (Opened in M15 candle bar from 2016.02.16 14:30:00 to 2016.02.16 14:44:59)
  2. 2016.02.16 14:48:46 (Opened in M15 candle bar from 2016.02.16 14:45:00 to 2016.02.16 14:59:59)

Both were opened on different M15 candles.

There's no option (yet) to wait X minutes since first order open, the one related to hold since first open is "One order per candle bar", and it does not wait for X minutes, it waits for next X minutes candle, and "One order per round hour period", that waits for the next hour change.
The one related to wait in minutes is "New order after N minute(s) since last closed one".

I have plans to add scopes based on distance (Pips/%ADR) and minutes since last open order, but with no ETA by now.

Have you already read the #Post 1 of this thread yet?
  • #805
  • Feb 16, 2016 7:42am Feb 16, 2016 7:42am
Quoting aeseme
{quote} You have "One order per candle bar" as a Hold[H] filter scope and M15 as candle time-frame. By looking at these orders times: 2016.02.16 14:43:17 (Opened in M15 candle bar from 2016.02.16 14:30:00 to 2016.02.16 14:44:59) 2016.02.16 14:48:46 (Opened in M15 candle bar from 2016.02.16 14:45:00 to 2016.02.16 14:59:59) Both were opened on different M15 candles. There's no option (yet) to wait X minutes since first order open, the one related to hold since first open is "One order per candle bar", and it does not wait for X minutes, it waits for...
got it.thx for explanation.
Take what you can, give nothing back
  • #806
  • Feb 16, 2016 8:00am Feb 16, 2016 8:00am
Aseme :look at image ,,PIN one is active but not working properly,its giving wrong direction and still hang even time changed..
and how can other pins be active ???pin2 and pin3??
Attached Image (click to enlarge)
Click to Enlarge Name: pinss.png Size: 347 KB
  • #807
  • Feb 16, 2016 11:29am Feb 16, 2016 11:29am
Hello aeseme and all!
I am new in this thread. I read through most of the post and I am not so sure if my PINs are working since they are not showing anything.
Are they working just fine or somewhere i went wrong? Didn't see any trades after i activated auto when i think the condition fits so I am a little lost.
Thanks!
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 687 KB
  • #808
  • Feb 16, 2016 11:46am Feb 16, 2016 11:46am
Quoting Husky77
{quote} got it.thx for explanation.
NP
Have you already read the #Post 1 of this thread yet?
  • #809
  • Feb 16, 2016 11:54am Feb 16, 2016 11:54am
Quoting RenkoLover
Hello aeseme and all! I am new in this thread. I read through most of the post and I am not so sure if my PINs are working since they are not showing anything. Are they working just fine or somewhere i went wrong? Didn't see any trades after i activated auto when i think the condition fits so I am a little lost. Thanks! {image}
Everything seems fine, all MADdash's with their corresponding PIN enabled as per their labels at their top left corner. PINS are not showing anything just because no alerts are being generated by MADdash (see the ALTERS labels in each MADdash chart, there's nothing below there).
Sometimes you have to be patient, alerts are not being generated all the time and by the way, are 100% dependent on your current MADdash settings.
Have you already read the #Post 1 of this thread yet?
  • #810
  • Feb 16, 2016 12:07pm Feb 16, 2016 12:07pm
Quoting aeseme
{quote} Everything seems fine, all MADdash's with their corresponding PIN enabled as per their labels at their top left corner. PINS are not showing anything just because no alerts are being generated by MADdash (see the ALTERS labels in each MADdash chart, there's nothing below there). Sometimes you have to be patient, alerts are not being generated all the time and by the way, are 100% dependent on your current MADdash settings.
o ok thanks aeseme! just a little worried because i was watching the video in the first post, u had some highlighted ones in the second pin after u activated the maddash. one more weird thing happens when i followed the exact steps in the video adding the maddash.

step 1. i use the maddash+pin template
step 2. i open the properties of maddash indi and load the settings
step 3. i open the properties of DBMultiASM_MADdash_PIN_v2.0 and set the (e.g first one to PIN 1)
right after this step the entire MT4 will shut itself down.

to overcome this, i did step 1 and 2 for all the 3 PINS i wanted. then restart the whole MT4. then manually drag DBMultiASM_MADdash_PIN_v2.0 to each of the PIN charts again. hope i am not wrong anywhere.
  • #811
  • Feb 16, 2016 12:09pm Feb 16, 2016 12:09pm
Quoting yasirhawk
Aseme :look at image ,,PIN one is active but not working properly,its giving wrong direction and still hang even time changed.. and how can other pins be active ???pin2 and pin3?? {image}
PINS direction is 100% based on PINS own settings.
I cannot get what you mean with all these statements.
Have you already read the #Post 1 of this thread yet?
  • #812
  • Feb 16, 2016 12:23pm Feb 16, 2016 12:23pm
Quoting RenkoLover
{quote} o ok thanks aeseme! just a little worried because i was watching the video in the first post, u had some highlighted ones in the second pin after u activated the maddash.
This was just coincidence... there were alerts for that set file at that time.

Quote
one more weird thing happens when i followed the exact steps in the video adding the maddash.
step 1. i use the maddash+pin template
step 2. i open the properties of maddash indi and load the settings
step 3. i open the properties of DBMultiASM_MADdash_PIN_v2.0 and set the (e.g first one to PIN 1)
right after this step the entire MT4 will shut itself down.
This is really odd.. I don't have a coherent answer for that.
Quote
to overcome this, i did step 1 and 2 for all the 3 PINS i wanted. then restart the whole MT4. then manually drag DBMultiASM_MADdash_PIN_v2.0 to each of the PIN charts again. hope i am not wrong anywhere.
If I understood you correctly, by doing this you will end up with 2 DBMultiASM_MADdash_PIN_v2.0's on each chart because the MADdash+PIN template already have both, but if that worked for you, it's OK, only drawback would be a little extra waste of resources.
..
Have you already read the #Post 1 of this thread yet?
  • #813
  • Feb 16, 2016 12:44pm Feb 16, 2016 12:44pm
Quoting aeseme
{quote} If I understood you correctly, by doing this you will end up with 2 DBMultiASM_MADdash_PIN_v2.0's on each chart because the MADdash+PIN template already have both, but if that worked for you, it's OK, only drawback would be a little extra waste of resources. ..
after i restarted the MT4, the DBMultiASM_MADdash_PIN_v2.0 disappears from the list of indicators so i think there is only one.
I am going to sit by here and observe it hope it opens a trade soon then it will make me feel better
  • #814
  • Feb 17, 2016 6:26am Feb 17, 2016 6:26am
is there and issue here Aeseme?
http://screencast.com/t/0MtnebO8UmF
Take what you can, give nothing back
  • #815
  • Feb 17, 2016 7:25am Feb 17, 2016 7:25am
Quoting Husky77
is there and issue here Aeseme? http://screencast.com/t/0MtnebO8UmF
Attached Image

If you have the trail settings like in the picture, the trailing distance will be the last (or higher) lock level.
The video doesn't show your trail settings nor all your lock levels, but it seems that you have the trail settings like in the picture and your higher lock level is $30... and if that's correct, what's on your video is OK. Now, if my guessing isn't correct, you've hit a bug
Have you already read the #Post 1 of this thread yet?
  • #816
  • Feb 17, 2016 7:28am Feb 17, 2016 7:28am
Quoting aeseme
{quote} {image} If you have the trail settings like in the picture, the trailing distance will be the last (or higher) lock level. The video doesn't show your trail settings nor all your lock levels, but it seems that you have the trail settings like in the picture and your higher lock level is $30... and if that's correct, what's on your video is OK. Now, if my guessing isn't correct, you've hit a bug
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_1.jpg Size: 143 KB
Take what you can, give nothing back
  • #817
  • Feb 17, 2016 8:42am Feb 17, 2016 8:42am
Quoting RenkoLover
{quote} after i restarted the MT4, the DBMultiASM_MADdash_PIN_v2.0 disappears from the list of indicators so i think there is only one. I am going to sit by here and observe it hope it opens a trade soon then it will make me feel better
Have you already read the #Post 1 of this thread yet?
  • #818
  • Feb 17, 2016 8:43am Feb 17, 2016 8:43am
Quoting aeseme
{quote} Good to know it's not a bug
to be honest i'm in love with this dash.and if we count Brain dash combined signals is pure LOVE baby
Take what you can, give nothing back
  • #819
  • Feb 17, 2016 8:44am Feb 17, 2016 8:44am
Quoting Husky77
{quote} {image}
Good to know it's not a bug
Have you already read the #Post 1 of this thread yet?
  • #820
  • Feb 17, 2016 8:46am Feb 17, 2016 8:46am
now explain me how did i quoted your post before you to post it ?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_1.jpg Size: 212 KB
Take what you can, give nothing back
25 traders viewing now