Dashboard EAX | Page 32 | Forex Factory

Options

Go to
Permalinks
Print Thread

Related Instruments

AUD/CAD, AUD/CHF, AUD/JPY, AUD/NZD, EUR/USD, CAD/CHF, CAD/JPY, CHF/JPY, EUR/AUD, EUR/CAD, EUR/CHF, EUR/GBP, EUR/JPY, EUR/NZD, GBP/AUD, GBP/CAD, GBP/CHF, GBP/JPY, GBP/NZD, GBP/USD, NZD/CAD, NZD/CHF, NZD/JPY, NZD/USD, USD/CAD, USD/CHF, USD/JPY, AUD/USD

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard EAX
Exit Attachments

Dashboard EAX

  • #621
  • Jan 26, 2016 10:10am Jan 26, 2016 10:10am
aeseme , thank you for taking the time and trouble responding to your users. maybe you can show how to correctly use the exit trigger pin.
my experience so far is even without 'opposite signal' i.e pin1 buy pin3 (exit) still showing buy, the trade is opened and closed immediately.
  • #622
  • Jan 26, 2016 11:16am Jan 26, 2016 11:16am
Quoting rabbit68
aeseme , thank you for taking the time and trouble responding to your users. maybe you can show how to correctly use the exit trigger pin. my experience so far is even without 'opposite signal' i.e pin1 buy pin3 (exit) still showing buy, the trade is opened and closed immediately.
Would be good to know your settings for PIN3[x].

A similar issue was reported sometime ago (at Dashboard Trading thread), and the issue ended being related to high volatility settings on the PIN with close on opposite signal enabled.

There's nothing really special on the "close on opposite signal" usage, the most important thing IMHO is to avoid too volatile settings on the related PIN, but that depends on the user's strategy.
Have you already read the #Post 1 of this thread yet?
  • #623
  • Jan 26, 2016 11:31am Jan 26, 2016 11:31am
Quoting aeseme
{quote} Would be good to know your settings for PIN3[x]. A similar issue was reported sometime ago (at Dashboard Trading thread), and the issue ended being related to high volatility settings on the PIN with close on opposite signal enabled. There's nothing really special on the "close on opposite signal" usage, the most important thing IMHO is to avoid too volatile settings on the related PIN, but that depends on the user's strategy.
an example.if i want to use pin1+2 for trigger and pin 3 only for exit is this correct ?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_2.png Size: 244 KB
Take what you can, give nothing back
  • #624
  • Jan 26, 2016 12:14pm Jan 26, 2016 12:14pm
Quoting Husky77
{quote} an example.if i want to use pin1+2 for trigger and pin 3 only for exit is this correct ? {image}
This will use pin1+pin2+pin3 as trigger and pin3 as exit.

Something like your example will be available in next revision.

By now, to enable exit on opposite signal, the PIN must be enabled as trigger. I did this on purpose because I thought it would be safer, but I've changed my mind and right now I think that it is better to have triggers/filters and exits independent of each other.

This is one of the improvements I do expect to have available in the next revision: PINS triggers for entry and exit independent of each other (and probably extended to some other module as well).
Have you already read the #Post 1 of this thread yet?
  • #625
  • Jan 26, 2016 12:37pm Jan 26, 2016 12:37pm
can you test this? pin 1 maddash, pin 3 dashTZ with exit rule in your dash. Close the trades after open it. Very weird
Attached File(s)
File Type: zip DashEAX.zip   4 KB | 1,058 downloads
Try don't lose pants never...
  • #626
  • Jan 26, 2016 12:44pm Jan 26, 2016 12:44pm
Quoting aeseme
{quote} {quote} This is really odd, mostly if it is something that happen only to you and only in one of your MT4 terminals. Neither the Dashboard nor PINS leave cached data. PINS make use of global variables and they are completely erased when the respective PIN is removed. If you are completely sure that you don't have any loaded PIN on any chart, what you can do is remove all global variables that has the pair name as prefix and pin3 as suffix.
Thank You, Aeseme!

As it turns out - I do have a lot of garbage Global Variables cached even when no chart / EA is loaded:
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 365 KB


Once I deleted all of them and loaded the chart+EA afresh - everything is back to normal:
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 475 KB


God Bless,

TJ
  • #627
  • Edited 2:18pm Jan 26, 2016 1:56pm | Edited 2:18pm
Quoting braintheboss
can you test this? pin 1 maddash, pin 3 dashTZ with exit rule in your dash. Close the trades after open it. Very weird {file}
I've tested it in the way you described and the opened orders are not being closed here (Using the dashTZ in Dashboard Trading Post 16,061).

By the way, is there a chance of you having any other chart with PIN3 enabled, either MADdashPIN or other DashTZ instance that could be interfering in your current MT4 terminal setup?
Have you already read the #Post 1 of this thread yet?
  • #628
  • Jan 26, 2016 2:19pm Jan 26, 2016 2:19pm
Quoting aeseme
{quote} I've tested it in the way you described and the opened orders are not being closed here (Using the dashTZ in Dashboard Trading Post 16,061). By the way, is there a chance of you having any other chart with PIN3 enabled, either MADdash or other DashTZ instance that could be interfering in your current MT4 terminal setup?
No. I check all again and only dashTZ have pin3. But the weird thing is if you are using my set file and you dont have problems then i dont understand what is the problem because i'm not only who have it... For normal trigger PINS are fine. I have your last version (X006d1 )
Try don't lose pants never...
  • #629
  • Jan 27, 2016 12:40am Jan 27, 2016 12:40am
Aeseme can you please advise?

I am using dash X006d1, and have set session 1 to start at 8am. I am GMT, so its currently 6.38am local time, and this is what I thought the session times referred to, they certainly seem to adhere in other versions of this dash that I have used. However, this demo has trades open now. My broker is GMT +2 so its 8.39am broker time. So is this an error or does this version of dash refer to broker time as a guide for session start times?


any help would be appreciated

Attached Image (click to enlarge)
Click to Enlarge Name: dash time.jpg Size: 287 KB
  • #630
  • Jan 27, 2016 2:39am Jan 27, 2016 2:39am
my question is .
1.can i use pin only for filter?
2.can i put more indictor in one pin/one windows ??.say it i put bias_pin and has_pin in one windows gold with maddash pin2
3.can i put same indicator with diffrent timeframe.?say it i put has_pin on m15 with pin1 and put has_pin on m1H on pin2
  • #631
  • Jan 27, 2016 4:34am Jan 27, 2016 4:34am
Hello Aeseme,

can you help me? I have set some filters to initiate trades, now i have the idea if the situation changes i will exit the trade with a pin.
I am correct? If i say have long signal by filters and get the opposite signal from pin (X enabled), the trade will close?
If one signal are out of direction, will exit the trade?
If the trade is made, one signal now in opposite direction, but the trade went fine and after time comes a signal from pin, how can the trade stay?

Say rs, gap and heatmap are okay, trade goes on ..exit pin say also good. Now the heatmap are changing, what are now?

Hope you get what i mean?

Thanks

Michael
Perfection is the enemy of good enough!
  • #632
  • Jan 27, 2016 1:32pm Jan 27, 2016 1:32pm
Hi! Not working for all PINS. Who are know to fix?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 496 KB
  • #633
  • Jan 27, 2016 1:51pm Jan 27, 2016 1:51pm
Quoting blamshakk
Aeseme can you please advise? I am using dash X006d1, and have set session 1 to start at 8am. I am GMT, so its currently 6.38am local time, and this is what I thought the session times referred to, they certainly seem to adhere in other versions of this dash that I have used. However, this demo has trades open now. My broker is GMT +2 so its 8.39am broker time. So is this an error or does this version of dash refer to broker time as a guide for session start times? any help would be appreciated {image}
Your picture is not showing the sessions box nor the terminal window Trade tab showing the trades you're referring to, so I have to rely on what you wrote.

Session start and end time are related to your local computer time.

Next time please post additional details to help understand what might have happened.
Have you already read the #Post 1 of this thread yet?
  • #634
  • Jan 27, 2016 1:54pm Jan 27, 2016 1:54pm
Quoting loll
Hi! Not working for all PINS. Who are know to fix? {image}
Yourself, by following instructions in Post #1
Have you already read the #Post 1 of this thread yet?
  • #635
  • Jan 27, 2016 2:57pm Jan 27, 2016 2:57pm
Aeseme ı like your dash very much .Can it be possible

1-To add partial close option to TP and SL levels
2-To add open incremental lot order when the conditions to open inverse order occur when existing order goes on

Best Regards
  • #636
  • Edited 3:59am Jan 28, 2016 1:16am | Edited 3:59am
Hello Aeseme,

i noticed sometime all is good and the signal makes a trade, but it makes some small pips and go down. Slowly over long time it goes smoothly down.
Is it possible if so trades are in the basket to eliminate by a fixed time?
Say after selectable minutes the red trade is knocking out basket?
Cool if some parameters are also to check. Say the trade is 50% from initial ADR SL or so. I will cut out the smoothly going down trades.

Hope you get it.

Thanks

Michael
Perfection is the enemy of good enough!
  • #637
  • Jan 28, 2016 3:48am Jan 28, 2016 3:48am
Quoting aeseme
{quote} Yourself, by following instructions in Post #1
Thank you very much
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 452 KB
  • #638
  • Jan 28, 2016 7:38am Jan 28, 2016 7:38am
Quoting mhejek
my question is .
1.can i use pin only for filter?
If you mean to filter based only on PINS, then yes.
Quoting mhejek
2.can i put more indictor in one pin/one windows ??.say it i put bias_pin and has_pin in one windows gold with maddash pin2
This can to be done programmatically by making MTF dashs of HAS and Bias (like MADdash).. sort of HASdash and BIASdash ...
I have plans to make something like this mostly because I think that the best way to integrate indicators is by PINS, but I don't have an ETA for this yet.
Quoting mhejek
3.can i put same indicator with diffrent timeframe.?say it i put has_pin on m15 with pin1 and put has_pin on m1H on pin2
The answer would be similar to the previous one (if I correctly got what you mean).
Have you already read the #Post 1 of this thread yet?
  • #639
  • Jan 28, 2016 8:10am Jan 28, 2016 8:10am
Aeseme pardon me but trailing sl line is not trailing .İsnt it
  • #640
  • Edited 2:31pm Jan 28, 2016 12:57pm | Edited 2:31pm
EDIT: Just updated and WOW its already in there.! what a king



HEy buddy,

I have been following this and MADash since the start, so very happy they are together now.

Any chance of adding something like this pivot indicator into your epic dashboard.

Attached Image (click to enlarge)
Click to Enlarge Name: PIVOTS.png Size: 126 KB
12 traders viewing now, 1 is registered: