You can copy all trades from your MT5 platform to MT4 platfom | Page 2 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Copy objects from MT4 to MT5? 0 replies

Copy realtime quotes from MT5 to MT4 5 replies

Can you copy trades from ctrader to mt4 platform? 0 replies

How to Access your Metatrader Platform MT4/MT5 Remotely 5 replies

Can you "copy" MT4 charts? 1 reply

Attachments: You can copy all trades from your MT5 platform to MT4 platfom
Exit Attachments

You can copy all trades from your MT5 platform to MT4 platfom

  • #21
  • Apr 15, 2014 5:54pm Apr 15, 2014 5:54pm
Quoting auto9817
MT 5 to MT 4 Trade Copier EA Version 5.0 Updated. What is new in version 5.0? In version 3.9, Sleep function between each copy of positions delayed the trade copying time. Therefore, in version 5.0, I removed this Sleep function for faster trade copy. This saves at least 1 seconds of copying time. What does MT 5 to MT 4 Trade Copier do ? Use your profitable Meta Trader 5 Expert Advisors with your favourite Meta Trader 4 brokers. MT 5 to MT 4 Trade Copier can help for it. {file} {image}


THANK YOU auto. I was embrassed to request that you removed the delay, I understand you were trying hard to give us a great free product, but you also need to make some sales. This is really great news. I shall try it out with creating the alternative path into mt4 for the log files, and check to see whether the trade entries would be made into this alternative path instead. Although once this alternative path is created, copier will not output 5004 error and continues to write trade entries into mt4 data folder, "MQL/File" folder and copies the trade properly.

Will keep u up to date with any issues I may encountered. But I will stick to lot proportion. I have not purposely tested such that mt4 may create non divisible lot (eg 0.07) (* its possible to divide 0.7 if smallest lot increment is 0.01). I hoped u hv included logic to properly close that out, then orphan out a odd 0.01 lot on mt4 or worst close this orphan (rounded off) lot after 1 sec of realising its not on sender's list of trades anymore.

I gave up on best logic to take care of partial close b/w sender and receiver, but perhaps a logic can be included to ensure that lot size created on mt4 is divisible by 2 without any remainder. That will make synching easier?

PS: One of the commercial mt5 to mt4 copier did not include RM, only LM for the same reason I have stated earlier. Although the mt4i personal trade copier (from mt4 to mt4) has RM all along and this issue must have been taken care for mt4 trade copy. Is there a way to peel the mt4i trade copier to take a peek into its logic of handling partial closure? Maybe helpful to give some ideas.
  • #22
  • Edited 12:57am Apr 16, 2014 12:33am | Edited 12:57am
Quoting ymleong
{quote} THANK YOU auto. I was embrassed to request that you removed the delay, I understand you were trying hard to give us a great free product, but you also need to make some sales. This is really great news. I shall try it out with creating the alternative path into mt4 for the log files, and check to see whether the trade entries would be made into this alternative path instead. Although once this alternative path is created, copier will not output 5004 error and continues to write trade entries...

Hello my friend.

When you change the terminal path, I advise you to remove the trade copier first from both of your MT 5 and MT 4 terminal and then reattach to charts for complete initialization with old variables.

Sometime, MT 5 and MT 4 terminals tends to remember the old variables in their memories if the EA is not detached from your chart. This would help.


Plus after I saw your post, I checked couple of web site for other commercial MT 5 to MT 4 Trade copier. It seems that they are very costly and expensive.

Kind regards.
  • #23
  • Apr 27, 2014 6:42pm Apr 27, 2014 6:42pm
Hi Auto,

is copyinterval adjustable? what will it do? What I am afraid is overloading the copier, it seems to work better my experts log suggests that there is a small time lapse of abt 300ms. (which is abt same as copyinterval default settings).
What is the best settings for this parm w/o killing the copier or overloading the mt4? (whilst mt4 has been known to kill itself with too much chart reading/etc, mt5 has not much issue on this)
  • #24
  • Apr 29, 2014 7:29pm Apr 29, 2014 7:29pm
Quoting ymleong
Hi Auto, is copyinterval adjustable? what will it do? What I am afraid is overloading the copier, it seems to work better my experts log suggests that there is a small time lapse of abt 300ms. (which is abt same as copyinterval default settings). What is the best settings for this parm w/o killing the copier or overloading the mt4? (whilst mt4 has been known to kill itself with too much chart reading/etc, mt5 has not much issue on this)
Hello

Yes, you are right. At a default, it uses 300 milliseconds (1 second = 1000 millisecond).
I believe that with 300 milliseconds setting I could use the trade copier even with some high frequency scalping EA. And I did not notice a lot of lagging between my MT 5 and MT 4 platforms.

You can try 100 milliseconds. It shall work. However it is certainly not recommended to use 1 millisecond or 0.01 millisecond. They may overload your MT 4 platform.
Kind regards.
  • #25
  • May 1, 2014 6:04am May 1, 2014 6:04am
Hi Auto,

Is there a possibility to trigger when there is trade details uploaded much like mt4i personal trade copier, instead of setting of copyinterval? (I guess this interval allows the EA to poll (read) the load to find new details). Mt4i copier works by some sort of trigger action not by time, thus, whenever there is new trades, updated sl/tp it will trigger

It would also be fants if u could leave the current open trades alone when RM/LM is changed. Currently if RM/LM is changed when there is an open trade, EA will partial closed the open trade and reopen proportionately. Its the same logic as MQL5 signals. RM/LM shld only affect NEW trades.

(both are small issues, copier is working great, I got ONE mt5 to 2 mt4). The copier also works on live accts in mt4, not sure rgds whether it works for live mt5, i guess it does. On the issue of 5004 error, once I created the alternative path within the c:\program files instead of the data folder path, and make sure attach sender, then receiver, it works well, trade logs are written into this alternative path.

On issue of leaving other trades not related to its own, its working very well, it leave it alone, even though I hv eurusd trades for both different senders, one is from mt5, and one from mt4 (using mt4i personal trade copier, mt4 to mt4). It would be neat if you could output the sender's trade ID# into comment field so that its easier to track the results b/w sender and receiver. Pls consider have a magic number field (4 digits w/o decimal) for me to input (on the m4 receiver EA) so that is easy to analyze the profitability of a signal/strategy/ea. If magic number is not given a random number is generated for tracking of its own trades. The random number is always tie to that specific sender (maybe used sender acct#, the possibility of having same acct# is very rare)
  • #26
  • May 2, 2014 7:49am May 2, 2014 7:49am
Quoting ymleong
Hi Auto, Is there a possibility to trigger when there is trade details uploaded much like mt4i personal trade copier, instead of setting of copyinterval? (I guess this interval allows the EA to poll (read) the load to find new details). Mt4i copier works by some sort of trigger action not by time, thus, whenever there is new trades, updated sl/tp it will trigger It would also be fants if u could leave the current open trades alone when RM/LM is changed. Currently if RM/LM is changed when there is an open trade, EA will partial closed the open trade...
Hello Friend

Good to hear that you can are successfully using this Trade Copier even for two Meta Trader 4 platform. That is superb.

I am also using it for several month without any problem.

Also my other customers are all happy with this trade copier.

On the other day, I set my trade copier EA on MT 5 strategy tester and MT 4 strategy tester, actually I was able to back test MT 5 multi currency pairs strategy on
MT 4 terminal. As long as you copy the terminal path of MT 4 correctly, you can actually back test your MT 5 strategy in MT 4 terminal using this trade copier.

But you have to start both strategy tester at the same time.

I guess no one will ever try this. I only did it as I was only curious. ......

Just let you know that there is time limit with this Demo version. So soon it will stop working.

Please let me know if you want to have unlimited version for your live account. It is far far cheaper than other vendors Trade Copier and this is very useful software to have it if you have some money making EA in Meta Trader 5.

I made few modification for the trade copier. So I will upload newer version now.

Kind regards.




Kind regards.
  • #27
  • Edited 8:21am May 2, 2014 8:02am | Edited 8:21am
Dear All

MT 5 to MT 4 Trade Copier version 5.2 is now released.

You can now set your own magic number and your own comment for each Meta Trader 4 positions.

Note that there is words limit for the order comment, so try to avoid really long comment for your order. It is the same for order magic number too.

With live version, you can use unlimited time and you can also enter International Meta Trader 4 trading contest or trading competition using your Meta Trader 5 expert advisors.

I already entered couple of trading competition using this trade copier. This trade copier also save me a lot of hassle to rewrite the meta Trade 5 code into Meta Trader 4 code. Just copy the trades from your Meta Trader 5 terminal to your Meta Trader 4 terminal. That is it.

The possibility is unlimited with this MT 5 to MT 4 Trade Copier.

Then enjoy this demo version. (note that there is time limit for demo version.)

Kind regards.
Attached File(s)
File Type: pdf MT5 to MT4 Trade Copier Instruction-v1.8.pdf   505 KB | 538 downloads
File Type: zip Upload for new MT 5 to MT 4 Trade Copier 1 May 2014.zip   505 KB | 439 downloads
  • #28
  • May 2, 2014 8:27am May 2, 2014 8:27am
...... Just let you know that there is time limit with this Demo version. So soon it will stop working. Please let me know if you want to have unlimited version for your live account. [/quote]

Hi Auto, pls let me know how I could buy it from u, I will use paypal to pay u if u r ok with this arrangement. Afraid western union is not available that easily in SG. I hv skrill too, but skrill takes a bit of comms from poor us. I assume its in usd, so u can just let me know and I will pay in USD in paypal (if u dont hv a 3rd party ecommerce payment link on your own site)

Once again very much thanks and really really humble appreciation for the great work u put in for the copier.
  • #29
  • Edited 11:56am May 2, 2014 11:13am | Edited 11:56am
Quoting ymleong
...... Just let you know that there is time limit with this Demo version. So soon it will stop working. Please let me know if you want to have unlimited version for your live account.
Hi Auto, pls let me know how I could buy it from u, I will use paypal to pay u if u r ok with this arrangement. Afraid western union is not available that easily in SG. I hv skrill too, but skrill takes a bit of comms from poor us. I assume its in usd, so u can just let me know and I will pay in USD in paypal (if u dont hv a 3rd party ecommerce payment link on your own site) Once again very much thanks and really really humble appreciation for the great work u put in for the copier. [/quote]

No problem at all. Originally I created this trade copier to enter the international Meta Trader 4 trading competition using Meta Trader 5 Expert advisor. As the back testing facility in meta trader 5 is superb in comparison to Meta trader 4. I still think Meta Trader 4 is great however Meta Trader 4 does not use multi core processor in back testing. So very slow in optimziation. With this trade copier my coding work reduced to half as I don't have to do any more coding in MT 4. It is great relief.

To get the unlimited version for live account, just send me one email to my email addresss. Just say you are ymleong from Forex Factory:

[email protected]

Then I will give you a very simple instruction for payment.

Kind Regards.
  • #30
  • Edited 2:43pm May 6, 2014 12:00pm | Edited 2:43pm
With this MT 5 to MT 4 Trade Copier, there are unlimited opportunities. You can make money or you can test your brilliant trading strategy in the international Meta Trader 4 trading competition using your Meta Trader 5 expert advisors. Here are few considerations about the value of this MT 5 to MT 4 Trade Copier.


• Get Meta Trader 5 signals in your Meta Trader 5 demo account, copy the signal to your live Meta Trader 4 accounts (You can mix Meta Trader 5 and Meta Trader 4 signals into one live MT 4 account with this Trade Copier.)


• Build and test your trading strategy in the advanced strategy tester in the Meta Trader 5 and use the Expert Advisors with your favourite Meta Trader 4 live brokers.


• Build and test your trading strategy in the advanced strategy tester in the Meta Trader 5 and enter the international Meta Trader 4 Trading competition. (Note that there are dozens of FX trading competition in Meta Trader 4 but none in Meta Trader 5.)


• Saving a lot of time from doing conversion coding work from Meta Trader 5 to Meta Trader 4 (There is no need to spend a lot of time to rewrite your code from Meta Trader 5 to Meta Trader 4. Just simply copy the trades from your Meta Trader 5 terminal to Meta Trader 4 terminal.)


• Distribute signals from your Meta Trader 5 expert advisors to your multiple Meta Trader 4 terminals. (This trade copier support up to five different Meta Trader 4 terminals.)


Doesn’t matter you are coder or general users or beginner or professional. You will get lots of benefits from this MT 5 to MT 4 Trade Copier.


Then enjoy this Trade Copier.


Plus note that unfortunately I can't sell this software on www.mql5.com as this software combines C++ language with mql5 and mql 4 languages. So you can only get this software outside www.mql5.com market section. Just contact me if you are interested in unlimited live account version on [email protected].
Attached File(s)
File Type: zip New upload for MT 5 to MT 4 Trade Copier Version 5_7_7 May 2014.zip   547 KB | 409 downloads
File Type: pdf MT5 to MT4 Trade Copier Instruction-v2.0.pdf   548 KB | 1,840 downloads
  • #31
  • May 15, 2014 1:41pm May 15, 2014 1:41pm
Hi all,
sorry for my english first and good evening all here.
I have a problem with the Mt4i and hope someone can help me out.
I have to MT4 accounts and in one run a EA now i will copy the trades CFDs US30Index to the other one because the timetables from the broker are different.
is it posible to run mt4i + my own Ea in one MT4?
if yes how i install it corect.
best regards all
  • #32
  • May 16, 2014 2:26am May 16, 2014 2:26am
Quoting cosima
. is it posible to run mt4i + my own Ea in one MT4? if yes how i install it corect. best regards all
Cosima,
If u talking rgds mt4i for mt4 YES its possible to run the copier AND another EA. Make sure that this other EA does not use SAME magic number that you can assign to the copier on the receiver mt4

On sender mt4, you can set magic number, symbols, comments to filter trade to receiver mt4. This sender's magic number refers to the magic number that the EA that was trading on sender generates

On receiver mt4, you can set magic number (NOT the same as sender, its meant for receiver own trade management routine and for trade analysis, it is NOT SAME as the sender's EA magic number), symbols, suffix and comments

In order to check for magic numbers, link your mt4 to myfxbook, then enable that column so that you can see that. Usually commercial EA may use a 4-10 digit magic number. Just assign a 2 digit magic number to the receiver for that trade copy and you should be ok. U can also just let the receiver creates its own magic number, its not a must to assign it. If you assign a magic number and it happens to crash with another EA's magic number this other EA can and will kill your trades. Similarly, the receiver EA will also killed the other's EA trades! YOU ARE HEREBY WARNED :nerd:

To Install
======
1) Download latest copy of the mt4i trade copier, earlier version will NEVER work on v600+ mt4
2) Place sender on sending mt4 (or master mt4)
3) Place receiver on receiving mt4 (or slave mt4)
4) Place your other EA on another chart. That is, ONE ea ONE chart, any timeframe

READ READ READ READ READ the user guide included in the mt4i trade copier before jumping and asking questions

Cosima, this is meant for mt5 to mt4 and not mt4i trade copier. If you do need help u can skype me @ lym1609. U can speak to me on skype even.

I will ignore all further questions rgds mt4i after this reply to respect Auto which created the topic.

CC: Auto
  • #33
  • May 17, 2014 8:33am May 17, 2014 8:33am
New update for MT5 to MT4 Trade Copier version 5.9 on 17 May 2014.



With this MT 5 to MT 4 Trade Copier, there are unlimited opportunities. You can make money or you can test your brilliant trading strategy in the international Meta Trader 4 trading competition using your Meta Trader 5 expert advisors. Here are few considerations about the value of this MT 5 to MT 4 Trade Copier.


• Get Meta Trader 5 signals in your Meta Trader 5 demo account, copy the signal to your live Meta Trader 4 accounts (You can mix Meta Trader 5 and Meta Trader 4 signals into one live MT 4 account with this Trade Copier.)


• Build and test your trading strategy in the advanced strategy tester in the Meta Trader 5 and use the Expert Advisors with your favourite Meta Trader 4 live brokers.


• Build and test your trading strategy in the advanced strategy tester in the Meta Trader 5 and enter the international Meta Trader 4 Trading competition. (Note that there are dozens of FX trading competition in Meta Trader 4 but none in Meta Trader 5.)


• Saving a lot of time from doing conversion coding work from Meta Trader 5 to Meta Trader 4 (There is no need to spend a lot of time to rewrite your code from Meta Trader 5 to Meta Trader 4. Just simply copy the trades from your Meta Trader 5 terminal to Meta Trader 4 terminal.)


• Distribute signals from your Meta Trader 5 expert advisors to your multiple Meta Trader 4 terminals. (This trade copier support up to five different Meta Trader 4 terminals.)


Doesn’t matter you are coder or general users or beginner or professional. You will get lots of benefits from this MT 5 to MT 4 Trade Copier.


Then enjoy this Trade Copier.


Plus note that unfortunately I can't sell this software on www.mql5.com as this software combines C++ language with mql5 and mql 4 languages and use of external language (C++) is not permitted on mql5.com. So you can only get this software outside www.mql5.com market section. Just contact me if you are interested in unlimited live account version on [email protected].
Attached File(s)
File Type: zip New Update for Demo MT5 to MT4 Trade Copier v5_9 17 May 2014.zip   594 KB | 385 downloads
File Type: pdf MT5 to MT4 Trade Copier Instruction-v2.1.pdf   593 KB | 627 downloads
  • #34
  • Edited 7:30pm May 18, 2014 6:32pm | Edited 7:30pm
Just answering someone's questions.

Advantage of this MT5 to MT4 Trade Copier.

You can connect unlimited number of Meta Trader 5 platforms to unlimited number of Meta Trader 4 terminal.


The ways to connect MT5 to MT4 include :

1. You can connect single Meta Trader 5 terminal to single Meta Trader 4 terminals (One to One).

2. You can connect each Meta Trader 5 terminal up to 5 different Meta Trader 4 terminals (One to Five).

3. You can connect single Meta Trader 5 terminal to single Meta Trader 4 terminals and you can repeat this for many times for other MT5 and MT4 terminals (Multiple of One to One).

4. Also you can mix and match Meta Trader 4 and 5 signals into your single Meta Trader 4 terminals and you can execute orders with your favourite Meta Trader 4 brokers.


Plus few tips to make the Trade Copier faster:

1. Keep fewest symbols as possible in you Market watch of your Meta Trader 5 terminals. But this is not compulsory and with many symbols in Market watch the Trade copier can still reasonably copy any positions. No need to change anything in your Meta Trader 4 terminals.

2. If you change any setting in either of EAs, then it is recommended to remove the Trade Copier EAs and reattach them to your chart again.

3. For someone who might not used to open the terminal path of Meta Trader 4, it is may be difficult to find terminal path at the first time. There is step by step instruction in the manual. This is really easy.

4. If terminal path does not work due to UAC problem, then create alternative path on your hard drive.

5. 99% chance you will not need custom mapping. However if you really have to use it, then read the manual on how to use them.


Kind regards.
  • #35
  • May 19, 2014 1:00am May 19, 2014 1:00am
hi all,
mercy for your help now it looks like to work
regards
cosima
  • #36
  • May 22, 2014 9:37am May 22, 2014 9:37am
Quoting auto9817
Just answering someone's questions. Advantage of this MT5 to MT4 Trade Copier. You can connect unlimited number of Meta Trader 5 platforms to unlimited number of Meta Trader 4 terminal. The ways to connect MT5 to MT4 include : 1. You can connect single Meta Trader 5 terminal to single Meta Trader 4 terminals (One to One). 2. You can connect each Meta Trader 5 terminal up to 5 different Meta Trader 4 terminals (One to Five). 3. You can connect single Meta Trader 5 terminal to single Meta Trader 4 terminals and you can repeat this for many times for...
Hello auto9817

Good day!
I really like the program.
My question to the potential that this system vice versa copy if you buy sell and vice versa?
Buy = Sell
Sell ​​= Buy
It would be possible?
Thanks!
George
  • #37
  • May 22, 2014 8:40pm May 22, 2014 8:40pm
Quoting qpack
{quote} Hello auto9817 Good day! I really like the program. My question to the potential that this system vice versa copy if you buy sell and vice versa? Buy = Sell Sell ​​= Buy It would be possible? Thanks! George
Hello George

Thanks for your interest in my MT5 to MT4 Trade Copier. You question is very interesting one too.

With current version, it is not possible to reverse buy => sell and sell=> buy. However, as far as I know that is not too difficult to handle.

So I will say it is possible. However let me ask you once more, do you really need to convert Buy => Sell and Sell => Buy ?

I mean, will this bring you some profit in Forex trading seriously ?

Please contact me [email protected] for further discussion.

Kind regards.
  • #38
  • Jun 1, 2014 5:41am Jun 1, 2014 5:41am
New update for MT 5 to MT 4 Trade Copier version 6.2 (26 May 2014)


Finally I added new powerful function on MT 5 to MT 4 Trade Copier which you can connect many Meta Trader 5 platform to single Meta Trader 4 platform.



Now you can do more things with this MT 5 to MT 4 Trade Copier. Below I listed some possible connection set up between MT5 and MT4 :


1. You can connect single Meta Trader 5 terminal to single Meta Trader 4 terminals (One to One).

2. You can connect each Meta Trader 5 terminal up to 5 different Meta Trader 4 terminals (One to Five).

3. You can connect single Meta Trader 5 terminal to single Meta Trader 4 terminals and you can repeat this for many times for other MT5 and MT4 terminals (Multiple of One to One).

4. You can connect many Meta Trader 5 terminals to single Meta Trader 4 terminal (Many to one)

5. You can connect many Meta Trader 5 terminals to many Meta Trader 4 terminals (Many to Many)

6. Also you can mix and match Meta Trader 4 and 5 signals into your single Meta Trader 4 terminals and you can execute orders with your favourite Meta Trader 4 brokers.


Here I will demonstrate How this MT 5 to MT 4 Trade Copier can solve one of very complex connection problem for users.
This might happen when you are running many Meta Trader 5 and 4 signal at the same PC of yours.


Imagine you want to connect your 3 Meta Trader 5 terminals to 5 Meta Trader 4 terminals like below.


MT5 (S1)==> MT4(R1), MT4(R2), MT4 (R3)

MT5 (S2)==> MT4(R1) MT4(R4)

MT5 (S3)==> MT4(R2), MT4 (R5)



Here, S1 sends trades to 3 mt4 (R1, R2 and R3), at the same time R1 receive trades from 2 senders (S1 and S2).

R2 receive trades from 2 senders (S1 and S3).

R4 and R5 receive trades from one sender respectively (i.e. from S2 and S3).


(Where S=Sender, R=Receiver)



Again demo version has some time restriction but if you want to have the unlimited live account version then just contact me [email protected] here.

Kind regards.
Attached File(s)
File Type: pdf MT5 to MT4 Trade Copier Instruction-v2.3.pdf   619 KB | 466 downloads
File Type: zip New Update Lucky Pip MT 5 to MT 4 Trade Copier version 6_2 26 May 2014.zip   631 KB | 335 downloads
  • #39
  • Jun 2, 2014 11:31pm Jun 2, 2014 11:31pm
Here is a report i get: 2014.06.02 23:27:20.593 CopyPositionsFromMT5_V6.2 EURUSD,M15: Alert: Position File from MT 5 does not exist for Sender ID = 1
  • #40
  • Jun 3, 2014 6:02am Jun 3, 2014 6:02am
Quoting Andigho
Here is a report i get: 2014.06.02 23:27:20.593 CopyPositionsFromMT5_V6.2 EURUSD,M15: Alert: Position File from MT 5 does not exist for Sender ID = 1
Hello

It seems like you want to connect two Meta Trader 5 to single Meta Trader 4 account.
Read simple rule below.

1 Meta Trader 5 terminal will correspond to 1 chart in your Meta Trader 4 terminal.

Therefore to connect two MT5 terminal to your MT 4 terminal. You just need 2 charts in your MT4 terminal (not two terminal).
Also you have set Sender ID 0 for your first MT5 and set Sender ID 1 for your second MT5.

These Sender ID 0 and Sender ID 1 need to match with ConnectedSenderID 0 and 1 in your MT4 charts.

If you get error then just remove Trade copier from your chart and try again.

It should work.

Kind regards.
0 traders viewing now