Dashboard EAX

HI To all

Thank you so much Husky77 to explain about the funciton.

try to change the resolution for your display , and nothing wrong with your EAX , is a lot of function you can add or remove you just need to Tunne in as the way you like , instruction is on the page 1 to 403

try to change this function for true

Finally i will talk about my results from the full week on trading ( not great Biggest DD i do have so far ) thanks for GBP

first KEEP AWAY from any pair crossing with GBP until finish this month of March , i will keep the strategy to study the behavior, also from now i will keep the function W1 PP on in all time frames .


weekly results
4h 817 Pips , floating max 292 min 313 p
1h 611 pips, floating max 385 min 3076 ( most of then is GBP )
30m -605 pips floating max max 450 min 1809
MIX 224 pips floating max 212 min 1115

This might be related to the spread, that row could be positive and very close to 0, and with the new order, it becomes negative immediately due to the spread.
Anyway, do you have by chance a picture of USDJPY chart showing these two orders with their date/time and price and the swap of the first one when the second happened?

Did not capture all that, maybe next time, thanks

Thanks jposmak. After i changed resolution with different scaling on windows 10, the display was clear. Thanks again.

Hi,

I am testing EAX_SidusV3_majesty_v2.00 PIN and noticed that the signal remain though signal passed and nearing opposite signal. Can someone help me understand this plug in on EAX? I thought, for auto trading, the signal appear on crossing and trigger a trade and signal disappear after sometime to display next signal.

Hi nangkring,

It looks like this is not working.

Do we have any pin for 28 pairs two MA cross over?

Read carefully on displayed error, it needs file PIN.mqh that can be found with any easy way you can choose, first you can follow link inner my quote, second you can find at attachment and place PIN.mqh into specific folder that I have been mention on it.

Higher TF signal are very powerful, but there is always the question of how to use the board to know when to enter trades on these signals.
For a long time I used a combination of lower TF signals together with the higher TF signals to try to find a good entry.
I soon learned from experience (and also what senior EAX traders said - thnx Husky ) that mostly you are too late if you want LTF strength indicators to tell you when to open trades.

Best method is still to look at a chart and see price action to decide entries. But you don't want to trade only one pair's price action, you want to trade the whole board! So last week I mentioned the BasketChart indi and how I use it to help me decide when to start my board. Here is another example of a quick EAX scalp this morning.



A. Check my favourite weekly signals (PIN9)
B. Enter these pairs in the BasketChart indi.
C. Look at the price action of the whole basket - entry was when I had a strong trend-line break at Frankfort open.
D. Profit! (Max DD was 60 pips, so TP was set at 120 pips.)

Hope you guys have a good week.

Cheers

Lee

Hi LifeHunt3r,

Thank you for sharing your experience !

If i may ask :

Your basket chart is on which time frame ? 15M, H1,.. ?
Your PIN9 are taking signals from 5 sources. Could i ask what are they based on ?

could you tell us with pin are using on the mixer

I would have loved to give you my templates, but the worst nightmare of a forex trader happenned to me today: I lost the use of my computer (seriously) and might not be able to trade for the next month or two. But I'll be glad to explain to you my PINS and you can set it up yourself. I'm sending from my tablet and will help with setup as far as I can.

To answer your first question, this trade I took this morning I was looking for the entry on M1 because you'll get an immediate idea of direction of the basket when Frankfurt opens at 07h GMT. That's when I made that scalp - and good thing the BasketChart indi shows you clearly when the market turns because it climbed still further after I got out and then took a serious nosedive. But I have the indi open on M5 and H1 also to look for support & resistance levels (yes, baskets also respects S&R levels and even fib pivot zones - this is why I would love proper offline charts that can be created off a PIN).

PINS: (I apologise for lengthy description because I can't post templates).

Firstly, Jagz's MUX is set to 'majority agree', so it's looking for at least 3 out of 5 signals - I'm not looking for all PINS to agree. When you look at the MUX, you'll see PINS 10, 12,13, 15 and 17 are active.

All these PINS aim to give weely signals - I've tested and weekly is by far the best.

PINS 10: MADdash. I found a way to isolate the strongest pairs on each TF. Set up MADdash with only 2 TF's. Set both TF's on W1, Exponential, Period 3, BUT when you set the price, set one TF to close and the other one to open. Then set the alarm to compare TF1 to TF2. I can not remember the differential, but start at 5 and work up towards higher numbers to match your risk profile. Et voila, you have the strongest pairs on the W1 TF!! In other words, you are NOT comparing two TF's with each other, you are actually comparing open vs. close price on one TF (3 week exponential). This is probably my best PIN of all. (I have two systems that I trade often. The other one is MADdash PINS set up like this but for lower TF's M1-D1. Best signals you could possibly ask for, but entries are not as crisp as with the BasketChart indi. When I can trade again I will send everything and we can test the system together.) If you have difficulty setting up MADdash, you can use any other MA pin with 3 week exponential, but remember MADdash gives you DISTANCE FROM the moving average, not the moving average itself so the signals will not be of the same quality.

PIN 12: csDash. In the beginning of the week I use settings D1- period 5 (important) but I must be honest, later in the week I prefer standard W1 - period 1 settings as the week progresses (also an EXCELLENT signal to short on Fridays). Also I use difference of 3, not 4. The upper/lower threshold does not affect the signal (it's visual only).

PIN 13: CCFp Weekly signal. Settings: T,F,1,6,3,5

PIN 15: CMSM v17.01, Level 2 @ Period W1, Default MA settings, Multiplier 1, 2, 3, 4, 8, 12

PIN 17: BidRatio W1 with settings as on screen shot.

Enjoy!

Lee

Wait... LOL...on second thought, this might be the best thing that can happen to a "forex trader"...!!!

[quote=LifeHunt3r;12074319]{quote} I would have loved to give you my templates, but the worst nightmare of a forex trader happenned to me today: I lost the use of my computer (seriously) and might not be able to trade for the next month or two. But I'll be glad to explain to you my PINS and you can set it up yourself...
================

Thank you for the details !

"MADdash gives you DISTANCE FROM the moving average, not the moving average itself so the signals will not be of the same quality"

When i try to use EAX i combinations with PINS, I can see very often, the trades are taken not close but a bit far from moving average, support and resistance.

Is there a way to manage this ? Do I understand correctly from your description of MADdash, one can ignore to take a trade in case is far from moving average ?
Because every time the price travels too far from moving average, it tends to come back like a magnet closer.. so if trend is up, why to take the trade at high MA level,
rather than closer to moving average. I'm not looking for perfect entry but avoid to take it at very high or low level. I would appreciate if you or anybody knows, could advice ?

[quote=LifeHunt3r;12074319]{quote} I would have loved to give you my templates, but the worst nightmare of a forex trader happenned to me today: I lost the use of my computer (seriously) and might not be able to trade for the next month or two.

its a good month to be out the gbp will be a problem for a lot of people
ps i almost cry for your explanation

Kobra,

Read this post by George (919gilead) who is the brain behind MADdash to understand it better. To answer your question, read this post I made BEFORE I actually found a way to isolate the top pairs (as I explained yesterday).

Although MADdash is a brilliant tool, it remains one of many currency strenght meters... and you have to adapt it to your style of trading. This is why I diversify by using 5 quality CSM's that (mostly) use different calculation methods and the majority must agree in the weekly TF. I don't use that ONE favourite, magic strength meter that all noobs are looking for - it works sometimes, but soon you start feeding the broker's kids caviar...

Cheers

Lee

ok for the last two week ive been trading and setup and tunne in my EAX and know i am stuck with this one , i will test for next month and see whats happening always open for suggestion.

before i do have a full 28 pairs trading , for now one or another

yes it is slow but so far is (100% efficiency ) 6 trades 6 winners 4h
2 trades in 30 m 2 winner

Pin 9 is just to see if your not far from the trade

pin are in 3 categorys 4h 1h 30m / 12 34 56
SMA RSI (on)

slowlyyyy i dont mind at all $$$$$

Hi,

Do we have any pin for two moving averages cross over?

here i am not sure if is workk on live