Dashboard EAX

Quoting info4saeed

Disliked

Hi This week I will be testing on my new pin. As you can see in the picture, the market trend has changed in the marked areas. For confirmation I put 4 candles, 2 of which are above the zero line and two of them are below the zero line, as the signal point, which means that if this condition is not met, the signal will not be issued. Of course, I have created a condition that if you disable it, it will not check the zero line. I hope this pin works well {file} {image}

Ignored

Quoting Rivilearner

Disliked

macd + rsi pin {image} {image}

Ignored

Quoting info4saeed

Disliked

{quote} mostly closed in minus {image}

Ignored

Quoting info4saeed

Disliked

{quote} mostly closed in minus {image}

Ignored

Quoting Rivilearner

Disliked

{quote} Bro, you don't take every trade because there is a cross on macd, use rsi as filter for trades. If there is a cross on MACD down and price above on RSI level you don't take the trade until it comes below a certain level before you take the trade. Still, you will record some losing trades after following the strategy. If you could make a pin it could be tested on the long term and see how well it goes, if not, throw it in the lossing strategy waste bin

Ignored

Quoting jposmak

Disliked

{quote} Its all about timing, most of indicators Repaint, but the strength does not, just follow one of the good Indicator to get IN and OUT, or cycle identifier is rg star , as i sayd the pin has a probability the decision is yours to take the trade knowledge will help you out {image} {file} {file}

Ignored

Quoting info4saeed

Disliked

{quote} I made TDI pin which is in forum from this indi see previous may posts ( pin has not tested )

Ignored

Quoting jposmak

Disliked

{quote} try to create this pin based on the indicator i mentioned

Ignored

Quoting info4saeed

Disliked

{quote} actually, I joined dashboard rsi build in and macd pin which I created before and as you see in screenshot it sent buy signal in wrong trend I wanted to test when I was working on that pin creating

Ignored

Quoting belie

Disliked

Im running two main test setups. 1) Pivot Reversals : My main target is pivot + ADR high reversals (David Pivot). I did mistakes few months back with the strategy and figured out some of it. After fine tuning I got these results from last Monday. Definitely I will see the results over the rough sea. Guys give it a try. At lease you can stay away from garbage indicators in this method. I will publish the EAX preset if this goes well. {image} 2) Mini Profit Trend Trades in big waves : For this Im trying with JagzFX ichimoku PIN with EAX ADR. In both...

Ignored

Quoting Rivilearner

Disliked

{quote} It great hearing that you have created and tested the pin, would like to hear more of the testing and result

Ignored

Quoting info4saeed

Disliked

Momentum-signal without test {image} {file} {file}

Ignored

Quoting info4saeed

Disliked

{quote} I am with anyone who is with me on this path check version 2 {file} {file}

Ignored

Quoting Szomihu

Disliked

{quote} I think there is a bug. I used 30M, 1H, 4H with my setups. I use exactly same setup at PIN like at indicator. As you can see there was a sell trade with -16 pips and wtihout arrow. I drew a yellow arrow (on the M30 chart you can see) where was the fake signal (the fake sell arrow). {image}

Ignored

Quoting info4saeed

Disliked

{quote} My method for converting the indicator to a pin is that there is a function in the indicator called the signal alert, which I change the output of this function that shows on the screen to the pin signal. That is, I do not touch the internal computing code in any way I also put the original indicator in the post. As for the RSI , it does not exist in this indicator, but it can be added. My suggestion is not to touch the code and find an indicator that makes this possible I am at work now . But I will check the error you said by evening

Ignored

Quoting Szomihu

Disliked

{quote} Thanks Saeed I've got good results with it, just that trade without arrow/signal is a little bit strange (1trade from 100+) I run 10 DSBs, with different combos.. I share my results after a day {image}

Ignored

Quoting Szomihu

Disliked

{quote} Thanks Saeed I've got good results with it, just that trade without arrow/signal is a little bit strange (1trade from 100+) I run 10 DSBs, with different combos.. I share my results after a day {image}

Ignored

Quoting info4saeed

Disliked

{quote} My method for converting the indicator to a pin is that there is a function in the indicator called the signal alert, which I change the output of this function that shows on the screen to the pin signal. That is, I do not touch the internal computing code in any way I also put the original indicator in the post. As for the RSI , it does not exist in this indicator, but it can be added. My suggestion is not to touch the code and find an indicator that makes this possible I am at work now . But I will check the error you said by evening

Ignored