Hanover replies to PMs | Page 23 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Abokwaik replies to PMs 96 replies

Hanover - can you help me with MT4 qs please? 4 replies

Attachments: Hanover replies to PMs
Exit Attachments

Hanover replies to PMs

  • #441
  • Jan 30, 2016 11:10am Jan 30, 2016 11:10am
Quoting metatsock
{quote} Tnx u for your reply! I'd like an indicator draw the LINEAR REGRESSION ANGLE SLOPE...i built one : EUR=(iCustom("EURUSD",60,"i-Regr",1,1,24,0,0,i)-iCustom("EURUSD",60,"i-Regr",1,1,24,0,0,i+24))*10000; It's correct? It draws only last value...not all i....
I can't know the answer, without spending time studying the settings of the i-Regr indicator. I'm sorry, but I'm no longer troubleshooting other people's code. Perhaps you could get some help in one of the "I code your indicators for free" threads.
  • #442
  • Feb 4, 2016 9:03am Feb 4, 2016 9:03am
Hey Hanovre,
Do you have/know an EA to help orders only triggered at the bid ? I trade a grid and sometimes orders get triggered by the spread and i wanna avoid it as much as possible.
  • #443
  • Feb 4, 2016 10:49am Feb 4, 2016 10:49am
Dear Hanover,
I really like your indicator http://www.forexfactory.com/showthread.php?t=245064 but after mt4 latest update seem no work anymore
really hard to find indicator as you make
  • #444
  • Edited 6:41pm Feb 4, 2016 4:43pm | Edited 6:41pm
Quoting NKTrade
I really like your indicator http://www.forexfactory.com/showthread.php?t=245064 but after mt4 latest update seem no work anymore
Assuming that you mean the Display Info indicator, see this post. Since posting it, I have upgraded to Pepperstone MT4 build 950, and the version of the indicator in the link continues to work fine. However, make sure that you delete any .mq4 file.

Quoting metta87
Do you have/know an EA to help orders only triggered at the bid ? I trade a grid and sometimes orders get triggered by the spread and i wanna avoid it as much as possible.
I don't understand. Sure, it's possible to enter orders when the bid price reaches a certain value -- if that's what you're asking -- but you still have to buy at the ask price, and incur the spread. There's no way to avoid the spread, regardless of whether you're trading manually or entering your orders using an EA.
  • #445
  • Edited 11:21pm Feb 4, 2016 7:32pm | Edited 11:21pm
Quoting hanover
{quote} Assuming that you mean the Display Info indicator, see this post. Since posting it, I have upgraded to Pepperstone MT4 build 950, and the version of the indicator in the link continues to work fine. However, make sure that you delete any .mq4 file. {quote} I don't understand. Sure, it's possible to enter orders when the bid price reaches a certain value -- if that's what you're asking -- but you still have to buy at the ask price, and incur the...
Yeah im not trying to avoid the spread, Just to find an EA that triggers buy stop at bid price but fills at ask . Do you know/have some EA like that ? Thanks.
  • #446
  • Feb 4, 2016 10:10pm Feb 4, 2016 10:10pm
Yes, I had read that post but I don,t know why in my chart nothing to show.. I had attached my chart too
Quoting hanover
{quote} Assuming that you mean the Display Info indicator, see this post. Since posting it, I have upgraded to Pepperstone MT4 build 950, and the version of the indicator in the link continues to work fine. However, make sure that you delete any .mq4 file. {quote} I don't understand. Sure, it's possible to enter orders when the bid price reaches a certain value -- if that's what you're asking -- but you still have to buy at the ask price, and incur the spread. There's...
Attached Image (click to enlarge)
Click to Enlarge Name: hanover.jpg Size: 360 KB
  • #447
  • Feb 4, 2016 10:30pm Feb 4, 2016 10:30pm
At last I used this indi which also you created but if you want to please remove that exist in the blue box, I just need the information as above.
will greatly help me
regards
Attached Image (click to enlarge)
Click to Enlarge Name: hanover.jpg Size: 290 KB
  • #448
  • Edited Feb 5, 2016 12:09am Feb 4, 2016 11:41pm | Edited Feb 5, 2016 12:09am
Quoting metta87
Yeah im not trying to avoid the spread, Just to find an EA that triggers buy stop at bid price but fills at ask . Do you know/have some EA like that ? Thanks.
Sorry, no. I have an order entry script that adjusts the spread for SL/TP, but with market orders it enters at the current price (ask for buy; or bid for sell).

Several months ago I saw a script (somewhere on the FF forums) that allowed entry when the bid price reached a user-designated trendline, but I can't find it now.

If you are using a script or EA to place your grid orders (as limit orders?), then that script/EA would need to be modified accordingly, i.e. having another script/EA would not help you, in any case.
_______________________

Quoting NKTrade
At last I used this indi which also you created but if you want to please remove that exist in the blue box, I just need the information as above.
Change the settings as shown in the first screenshot below. Feel welcome to experiment, most of the settings should be fairly self-explanatory.

I'm sorry, I don't understand why the DisplayInfo indicator is not working for you. See second screenshot.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: PPI 091.png Size: 53 KB
Click to Enlarge Name: PPI 092.png Size: 255 KB
Attached File(s)
File Type: ex4 Signal.ex4   30 KB | 457 downloads
File Type: ex4 Display Info All Pairs.ex4   34 KB | 470 downloads
  • #449
  • Feb 5, 2016 1:18am Feb 5, 2016 1:18am
is ok sir, I don't know still not show anything with the display info indi, but it's ok the sinyal information is enough for me. Thank's for your help sir,,
Quoting hanover
{quote} Sorry, no. I have an order entry script that adjusts the spread for SL/TP, but with market orders it enters at the current price (ask for buy; or bid for sell). Several months ago I saw a script (somewhere on the FF forums) that allowed entry when the bid price reached a user-designated trendline, but I can't find it now. If you are using a script or EA to place your grid orders (as limit orders?), then that script/EA would need to be modified accordingly, i.e....
Attached Image (click to enlarge)
Click to Enlarge Name: hanoverr.jpg Size: 191 KB
  • #450
  • Feb 9, 2016 5:06am Feb 9, 2016 5:06am
hi hanover
why i am getting the horizontal/vertical lines...bug?
can the default setting of 240 be changed to 1440
please do reply if you find time...thanks
Attached Image (click to enlarge)
Click to Enlarge Name: hanover.png Size: 44 KB
Attached File(s)
File Type: mq4 CustomCandle6.mq4   9 KB | 410 downloads
learn and earn from the ups and downs...of life.
  • #451
  • Feb 13, 2016 3:01am Feb 13, 2016 3:01am
Quoting shinewel
why i am getting the horizontal/vertical lines...bug?
can the default setting of 240 be changed to 1440
I didn't write the indicator. I'm not certain exactly how it works, and I don't use it much any more. However, if I recall correctly, refreshing the indicator forces a re-plot which makes the erroneous lines disappear (you can force a refresh by toggling between chart timeframes). I assume the default settings can be changed, although I'm not sure.

I'm no longer coding or troubleshooting indicators, unless the indicator or EA is useful to me personally. If you want the bug fixed, you could try posting in one of the "I code your indicators for free" threads, and perhaps somebody else can help you. Or if you're willing to pay for the work, you could try MQL or elance.
  • #452
  • Feb 13, 2016 3:26pm Feb 13, 2016 3:26pm
thanks hanover...yes ..refreshing the chart sorts out the issue....
learn and earn from the ups and downs...of life.
  • #453
  • Feb 29, 2016 9:32am Feb 29, 2016 9:32am
Hi hanover,

Do you have an up-date-date version of news collected in csv? You posted one in past.

Thanks.
  • #454
  • Edited 7:54pm Mar 1, 2016 6:23pm | Edited 7:54pm
Quoting lightnight4
Do you have an up-date-date version of news collected in csv? You posted one in past.
Sorry about the delay in replying, we have moved house and I've been without internet for a week or two.

The process that generates the file is currently broken, but I will look at fixing it soon.
_____________________

[EDIT] Hopefully fixed now, try this.
  • #455
  • Mar 10, 2016 4:45am Mar 10, 2016 4:45am
Hannover,I am looking for a broker that has quotes realtime for US 2 yield and DE 2 yield bonds..if it is MT4 would be great.
Also VIX would be great too
can you help me!
Thanks
  • #456
  • Mar 10, 2016 6:16am Mar 10, 2016 6:16am
Quoting hanover
{quote} Sorry, no. I have an order entry script that adjusts the spread for SL/TP, but with market orders it enters at the current price (ask for buy; or bid for sell). Several months ago I saw a script (somewhere on the FF forums) that allowed entry when the bid price reached a user-designated trendline, but I can't find it now. If you are using a script or EA to place your grid orders (as limit orders?), then that script/EA would need to be modified accordingly, i.e....
Hi hanover,
Recently Ive been having problems with the Signal indicator that doesn't compile on the new versions of MT4 due to numerous errors recognized in the code. Im currently using an old compiled version of the file but that doesn't solve my problem entirely.
I need this indicator in mq4 because Im using it on multiple platforms with different settings. I need the ability to plot the indicator on the charts and remove it in need of a real-estate on the charts, in situations like tiled view of the charts, over populated charts and so on.
Saving the indicators settings in a template does not work because applying the template on the chart wipes out all the other objects previously placed on it.
So I need the ability to set the external values in the mq4 and be able to plot and remove the indicator without constantly entering the external settings which in my case is impossible task.
I have been using this indicator since the beginning of my trading, and since 2011 when you last helped me with it its THE ONLY indicator I use on my charts.
I have no other need or motive behind my request.
I highly value your personality, skills, and input here on FF. If you prefer so you can always PM me. Thanks in advance Dave.

Diki.
  • #457
  • Edited 12:35pm Mar 10, 2016 11:55am | Edited 12:35pm
Quoting juangecko
I am looking for a broker that has quotes realtime for US 2 yield and DE 2 yield bonds..if it is MT4 would be great. Also VIX would be great too can you help me!
Sorry I don't know any MT4 br0ker that offers these. However, here is a list of 200+ MT4 br0kers (clicking on the name takes you to their webpage). You could try e-mailing them.
________________________

Quoting Diki
Recently Ive been having problems with the Signal indicator that doesn't compile on the new versions of MT4 due to numerous errors recognized in the code.
I'm not surprised that it compiles with a zillion errors on build 600 onward. (All of my indicators do, hence the warning message at the top of each thread).

All I can do is attach the Signal.ex4 file that I use. It works 100% on my computer (Windows 7 Home Premium edition Service Pack 1; Pepperstone MT4 build 950). Make sure that you delete all Signal.mq4 files.

Beyond that, I have no way of knowing how your computer setup differs from mine, and I can't attempt to troubleshoot using anything other than my own computer, where I don't have any problems.

Quote
So I need the ability to set the external values in the mq4 and be able to plot and remove the indicator without constantly entering the external settings which in my case is impossible task.
OK, ignore my previous comment, that's a different issue. In that case, you would need to get a programmer who is familiar with the MQL4 build 600 programming language (I am not) to update the indicator for you, so that it compiles without errors. You could try posting the Signal.mq4 file (attached) on one of the "I code your indicators for free" threads, or if you're willing to pay for the work, you could try MQL or elance.
Attached File(s)
File Type: ex4 Signal.ex4   30 KB | 516 downloads
File Type: mq4 Signal.mq4   18 KB | 596 downloads
  • #458
  • Mar 11, 2016 6:15am Mar 11, 2016 6:15am
Quoting hanover
{quote} Sorry I don't know any MT4 br0ker that offers these. However, here is a list of 200+ MT4 br0kers (clicking on the name takes you to their webpage). You could try e-mailing them. ________________________ {quote} I'm not surprised that it compiles with a zillion errors on build 600 onward. (All of my indicators do, hence the warning message at the top of each thread). All I can do is attach the Signal.ex4 file that I use. It works 100% on my computer (Windows 7 Home Premium edition...
Thank you for always being helpful Dave. I'll go with your suggestions.
Have a great day!
  • #459
  • Edited 6:12pm Mar 11, 2016 8:46am | Edited 6:12pm
Quoting Diki
Thank you for always being helpful Dave. I'll go with your suggestions. Have a great day!
Diki,

A lot of my indicators allow the use of parameter files. I've upgraded Signal.ex4 for you so that the attached copy now does the same. Unzip the file and download the files into the same folders as in the ZIP. Then you can use a text editor like Notepad to edit the Presets---Signal.1 file to change the parameter settings to any values you wish, and enter 1 as the ParameterFile in the indicator settings dialog. This will cause the settings in the file to be used (overriding those in the dialog).

After that, you can copy this file to have as many different parameter files (e.g.
Presets---Signal.1
Presets---Signal.2
Presets---Signal.3
Presets---Signal.4
Presets---Signal.GBP
Presets---Signal.M15
etc)
and edit each to have different settings. Then you simply set ParameterFile to 1, 2, 3, 4, GBP, M15 etc to choose the file whose settings you require. Saves you from typing in all of the settings each time you attach the indicator to a chart.

Hope this helps. (I haven't included the Signal.mq4 file as it will compile with a zillion errors, if you compile it using build 600 or later).

David
_________________________

Additional instructions about the use of parameter files, copied from another post:

Parameter file(s)

To remove the nuisance of having to retype the same parameter settings every time you attach the indicator to a chart, you have two options:

1. Use MT4 templates (but these overwrite any other indicators, objects, etc that you also have on the chart). In this case, the indicator settings are defined when you attach or edit the indicator, using MT4's built-in dialog.

2. Use parameter file(s), as follows:

 If you enter nothing or TXT into the ParameterFile setting, then the indicator looks for a parameter file called Presets---Signal.TXT in the \experts\files folder.

 If you enter any other text (e.g. XXX, 1, etc) into the ParameterFile setting, then the indicator looks for a parameter file called Presets---Signal.XXX, Presets---Signal.1, etc in the ..../MQL4/Files folder. (This allows you to set up a different definition in each file, then simply enter the file suffix when you attach the indicator).

If the file can't be found, then the settings in MT4's dialog will be used. If the file is found, then the settings in the file will be used instead. Hence if you want to force the use of the MT4 dialog settings, simply enter the name of a non-existent file (e.g. "NONE").

Use a text editor like Notepad to view and/or edit the parameter presets files.

To disable an entry in the file, start the line with two slashes (//). (This means that the setting specified in the MT4 dialog will be used.) To re-enable it, remove the slashes. If you have multiple 'unslashed' entries in the file, the last will be used.

You may use any number of embedded spaces or underscores, and/or any combo of upper or lower case, to aid readability, however you wish.

Every line in the file (including blank lines) MUST end with a semi-colon (; ). Failure to do this will cause unpredictable results.

To save typing and improve accuracy, copy/paste the sample lines in the file. To disable the entire file, rename it, or delete its content.

To have any changes take immediate effect, either (1) re-attach the indicator to your chart; (2) edit the indicator (press Ctrl-I); or (3) toggle between timeframes. Otherwise the chart will not be refreshed/re-plotted until the RefreshPeriod setting takes effect.


Parameters

Inserted Code
extern string  ParameterFile        = "NONE";                            // Parameter File name
extern int     scaleX               = 16,                                // horizontal interval at which the symbols are created
               scaleY               = 10,                                // vertical interval
               offsetX              = 35,                                // horizontal indent for first symbol
               offsetY              = 50,                                // vertical indent
               fontSize             = 9,                                 // font size
               corner               = 1,                                 // corner: 0=top left; 1=top right; 2=bottom left; 3=bottom right
               symbolCodeBuy        = 217,                               // symbol code for a buy signal
               symbolCodeSell       = 218,                               // sell signal
               symbolCodeNoSignal   = 167;                               // no signal               
extern string  symbolFont           = "Wingdings";                       // font for text
extern color   signalBBColor        = RoyalBlue,                         // color of the symbol for a STRONG buy
               signalBuyColor       = Green,                             // color of the symbol of a weak buy
               noSignalColor        = Yellow,                            // no signal
               signalSellColor      = DarkGoldenrod,                     // color for a weak sell signal
               signalSSColor        = Red,                               // color for a STRONG sell
               textColor            = White;                             // color of all text
extern string  MAperiods            = "5,10,15,20,25,30,40,50,75,100",   // periods for moving averages
               WPRvalues            = "14,-70,-30",                      // values for Williams %R (period,high,low)
               RSIvalues            = "14,70,30",                        // values for RSI  (period,high,low)          
               STOvalues            = "8,3,3,70,30";                     // values for stochastic (%K,%D,slowing,high,low)             
extern int     ADRdays              = 30;                                // days lookback for ADR calc (excludes Saturdays/Sundays)  
extern string  RefreshPeriod        = "T";                               // 'T' = refresh values every new tick; otherwise use M1, M5, etc
extern bool    ShowMAlights         = true,                              // turn MA 'lights' on/off
               ShowOSClights        = true,                              // turn oscillator 'lights' on/off
               ShowSARlights        = true,                              // turn Parabolic SAR 'lights' on/off
               ShowPrice            = true,                              // display Price and Ticker
               ShowSpread           = true,                              // display spread ('S') data row 
               ShowPipValue         = true,                              // display pip value ('$') data row 
               ShowADR              = true,                              // display daily ranges ('R') data row 
               ShowSwapRates        = true,                              // display carry/swap/rollover ('C') data row 
               ShowCandleTimes      = true,                              // display candle times ('T') data row 
               ShowUpDownRoom       = true,                              // display candle times ('T') data row 
               UpdateTicker         = false;                             // activate Ticker yes/no
Attached Image (click to enlarge)
Click to Enlarge Name: PPI 120.png Size: 76 KB
Attached File(s)
File Type: zip Signal.ZIP   39 KB | 1,101 downloads
  • #460
  • Mar 11, 2016 9:15am Mar 11, 2016 9:15am
Quoting hanover
{quote} Diki, A lot of my indicators allow the use of parameter files. I've upgraded Signal.ex4 for you so that the attached copy now does the same. Unzip the file and download the files into the same folders as in the ZIP. Then you can use a text editor like Notepad to edit the Presets---Signal.1 file to change the parameter settings to any values you wish, and enter 1 as the ParameterFile in the indicator settings dialog. This will cause the settings in the file to be used (overriding those in the dialog). After that, you can copy this file to...
Wow David!
I am speechless. I will go through your instructions later and let you know of the outcome.
0 traders viewing now