Basket Trading EA | Page 577 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

BASKET TRADE Management: Using multiple trade management EA's on basket trades 11 replies

Basket Knights - A Basket Trading Round Table 1,313 replies

Trading 8 Forex Pairs - Fully Automatic - Basket Trading 7 replies

TMS basket: Dashboard for a basket of MA-Filtered RSI Signals 135 replies

Currency Basket and Carry Trading 51 replies

Attachments: Basket Trading EA
Exit Attachments

Basket Trading EA

  • #11,521
  • Sep 8, 2015 2:34pm Sep 8, 2015 2:34pm
Quoting TraderJoes
AUDCHF: CCI line just crossed its upper boundary, but the trade did not close. Why? Is this a bug? {image}
hi mine has closed about 7-8 candle before with good profit...It took the trade earlier as yours might.
Attached Image (click to enlarge)
Click to Enlarge Name: audchf-m2-destekfx.png Size: 69 KB
" Accepting losses is the most important single investment devise "
  • #11,522
  • Sep 8, 2015 2:35pm Sep 8, 2015 2:35pm
Quoting seller9
Here are the results of 2 identical tests, the only difference is one was lot=.01 and the other lot=.1. As you can see the Renko test edged out the time based charts test, all settings were the same and the trading time was the London session for both tests. The time base chart test used the built in HAS and the Renko based test used the HAS PIN on the Renko Charts. The graph time frame is different between the two but they both took the same amount of time, that is why the graphs look a little different. Interesting KIS Time Based Charts: {image}...

Dear Seller9,

Would it be possible to add TP and SL settings (similar to the ones in existing CCI, Hook and Go and Trend Break plugins) to the Casino HAS plugin? The idea is to try scalping 10-15 pips using the HASd under Renko charts while also simultaneously running the CCI Renko Trend (on the same Renko chart).

The Dashboard setup would look like this:

Trnd ON
PIN1 - Casino CCI
PIN2 - HASd

-------------
| P1 Or p2 |
-------------

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 364 KB


Boundless Thanks!
  • #11,523
  • Sep 8, 2015 3:15pm Sep 8, 2015 3:15pm
Quoting TraderJoes
{quote} Dear Seller9, Would it be possible to add TP and SL settings (similar to the ones in existing CCI, Hook and Go and Trend Break plugins) to the Casino HAS plugin? The idea is to try scalping 10-15 pips using the HASd under Renko charts while also simultaneously running the CCI Renko Trend (on the same Renko chart). The Dashboard setup would look like this: Trnd ON PIN1 - Casino CCI PIN2 - HASd ------------- | P1 Or p2 | ------------- {image} Boundless Thanks!
Give this one a try, I haven't had a chance to test it yet as it is fresh out of the oven.

Please report back if it works.

Attached File(s)
File Type: ex4 Casino_HAS_PIN_v1r.ex4   39 KB | 332 downloads
  • #11,524
  • Sep 8, 2015 4:13pm Sep 8, 2015 4:13pm
Quoting seller9
{quote} Give this one a try, I haven't had a chance to test it yet as it is fresh out of the oven. Please report back if it works. {file}

Thank You Soooooo Muccchhh! You are a cornucopia of ideas!

Attached Image


Will start testing it out...
  • #11,525
  • Sep 8, 2015 4:27pm Sep 8, 2015 4:27pm
Quoting seller9
{quote} Give this one a try, I haven't had a chance to test it yet as it is fresh out of the oven. Please report back if it works. {file}
Also, I don't know if this is possible at all, but it would be very nice to have a different Trade Comment for each plugin, i.e. to have this
Attached Image

in each plugin so we could keep track of which strategy is used.

This is, of course, non-essential - just a convenience...
  • #11,526
  • Sep 8, 2015 6:25pm Sep 8, 2015 6:25pm
Dear Seller9,
you have mentioned on the video explanation for CCI_v3e that the TP function has been changed. But it looks like as it is the same like v3d. Use_Opposite_Trigger_Tp are existing in same versions. May I miss something? I could not see the different of this function.
Thank you to clear me up....
" Accepting losses is the most important single investment devise "
  • #11,527
  • Sep 8, 2015 6:39pm Sep 8, 2015 6:39pm
WELL DONE SELLER9

The proof, at the top of the page, is in the actual trading ... GREAT IDEA TO SHOW THAT ...

CONGRATULATIONS

Cheers
Richard
When you are successful perhaps give a thought to others ... Kiva dot org
  • #11,528
  • Sep 8, 2015 6:43pm Sep 8, 2015 6:43pm

Casino_HAS_PIN_v1r.ex4 plugin



Issue #1 - having 2 indicator plugins on the same chart confuses the SL and TP settings. Thus, on a chart with an active trade initiated by one plugin (in this case, CCI), where we have different SL and TP settings, they become mixed up with the Casino_HAS_PIN_v1r settings, so the chart / EA doesn't know which trade is controlled by which plugin, like here:

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 203 KB


The trade was initiated by the CCI plugin WITH NO FIXED TP and WITH A FIXED SL using these settings:

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 48 KB


However, as soon as I added the Casino_HAS_PIN_v1r plugin to the chart with these settings (trailing SL & FIXED TP):

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot3.png Size: 46 KB


the trade on the chart is immediately reflecting these settings, as seen on the chart screenshot above, even though they should not be reflected for this trade at all since it was originally initiated by the CCI plugin and not by the HAS.

As a remedy, would renaming the variables / input parameters like HAS_Use_Fixed_TP_Pips, HAS_Fixed_TP_Pips, CCI_Use_Fixed_TP_Pips, CCI_Fixed_TP_Pips and so on and so forth for other parameters in each plugin make a difference?

Thank you again, seller9, for your titanic labor of love!
  • #11,529
  • Sep 8, 2015 7:05pm Sep 8, 2015 7:05pm
Quoting TraderJoes
Casino_HAS_PIN_v1r.ex4 plugin Issue #1 - having 2 indicator plugins on the same chart confuses the SL and TP settings. Thus, on a chart with an active trade initiated by one plugin (in this case, CCI), where we have different SL and TP settings, they become mixed up with the Casino_HAS_PIN_v1r settings, so the chart / EA doesn't know which trade is controlled by which plugin, like here: {image} The trade was initiated by the CCI plugin WITH NO FIXED TP and WITH A FIXED SL using these settings: {image} However, as soon as I added the Casino_HAS_PIN_v1r...
Perhaps a better option would be to have different magic numbers for each plug in?
An extra option in each plug in to add a number eg 100 to the already inbuilt magic numbers so CCI plug in would be say 128 for UJ and you could set the HAS plugin at 200 so that its magic number would be 228 for UJ.
Would that solve the problem? Not sure how much coding would be involved to do this for each plugin that is available.
  • #11,530
  • Sep 8, 2015 7:34pm Sep 8, 2015 7:34pm
Quoting Pip Poppy
{quote} Perhaps a better option would be to have different magic numbers for each plug in? An extra option in each plug in to add a number eg 100 to the already inbuilt magic numbers so CCI plug in would be say 128 for UJ and you could set the HAS plugin at 200 so that its magic number would be 228 for UJ. Would that solve the problem? Not sure how much coding would be involved to do this for each plugin that is available.
You are probably right. It would be better to pass a unique magic# value from each plugin to the EA.
  • #11,531
  • Sep 8, 2015 7:56pm Sep 8, 2015 7:56pm
Quoting freedom48
Dear Seller9, you have mentioned on the video explanation for CCI_v3e that the TP function has been changed. But it looks like as it is the same like v3d. Use_Opposite_Trigger_Tp are existing in same versions. May I miss something? I could not see the different of this function. Thank you to clear me up....
I believe it was SL that was changed, too many things going on to keep them all straight right now. LOL
  • #11,532
  • Sep 8, 2015 8:01pm Sep 8, 2015 8:01pm
Quoting TraderJoes
Casino_HAS_PIN_v1r.ex4 plugin Issue #1 - having 2 indicator plugins on the same chart confuses the SL and TP settings. Thus, on a chart with an active trade initiated by one plugin (in this case, CCI), where we have different SL and TP settings, they become mixed up with the Casino_HAS_PIN_v1r settings, so the chart / EA doesn't know which trade is controlled by which plugin, like here: {image} The trade was initiated by the CCI plugin WITH NO FIXED TP and WITH A FIXED SL using these settings: {image} However, as soon as I added the Casino_HAS_PIN_v1r...
You can only use 1 TP and 1 SL total from more than one plugin, that's the way it is designed to be.
  • #11,533
  • Sep 8, 2015 8:03pm Sep 8, 2015 8:03pm
Quoting Pip Poppy
{quote} Perhaps a better option would be to have different magic numbers for each plug in? An extra option in each plug in to add a number eg 100 to the already inbuilt magic numbers so CCI plug in would be say 128 for UJ and you could set the HAS plugin at 200 so that its magic number would be 228 for UJ. Would that solve the problem? Not sure how much coding would be involved to do this for each plugin that is available.
Casino sets the magic number, not the plugin, when it opens the trade.

KIS
  • #11,534
  • Sep 8, 2015 8:06pm Sep 8, 2015 8:06pm
Quoting PayItForward
WELL DONE SELLER9 The proof, at the top of the page, is in the actual trading ... GREAT IDEA TO SHOW THAT ... CONGRATULATIONS Cheers Richard
Everytime you post results they go Belly Up and wipe out the account.
  • #11,535
  • Sep 8, 2015 9:23pm Sep 8, 2015 9:23pm
asking for help.
I don't know what happende this days, after I left the market for about 2 months, I find the EA stops working.
I choose the version BT 25 OR BT 27, once they all works well and I think I have known how to make big pips from the market.
However when I returned , the EA doesn't work now.
The alert says"0 trades sent".
Anyone knows how to resolve it?
I have checked that these reasons are not the cause:
1. no suffix 2. account size(650USD)
I also restalled the MT4 , yet it still doesn't work.
Hope some one can help me and I am too eager to trade, and we may all see there is a big fish before our eyes.
The C5 is near an import R/S region.
  • #11,536
  • Sep 8, 2015 9:23pm Sep 8, 2015 9:23pm
BTW, the version of MT4 is B840
  • #11,537
  • Sep 8, 2015 9:57pm Sep 8, 2015 9:57pm
Seller9,

Appreciate all that you do.
In "BE2" (%inc setting) please add "Use_%inc" with True/False drop down menu, please do the same for "Auto"
"Use_HAS" has a True/False drop down menu; and it's perfect, just set and forget.
Reason for asking you is due scheduled of a restart of VPS, on SUN; and unability to click the "Auto" and "%inc" button.....to enable trading on MON.

Regards
Chanon
  • #11,538
  • Sep 8, 2015 10:08pm Sep 8, 2015 10:08pm
Quoting seller9
{quote} Everytime you post results they go Belly Up and wipe out the account.
Hi
You get out what you put in ... and you sure put in a LOT ...

... and beside there is no-one more deserving that YOU to break with the Everytime tradition!

The time to Party is no longer a distant light ...

Cheers
Richard
When you are successful perhaps give a thought to others ... Kiva dot org
  • #11,539
  • Sep 9, 2015 1:07am Sep 9, 2015 1:07am
Hi all Me again,
Here is the pick I made yesterday which still did not close . I was thinking outside of the box and I see all forex trader are using standard time frame. That means all forex traders will have the same targets and know what we know. However let us say that We can know way before them. using 10m,20m,40m,3H,6H time frame.
I Tried with BT27, it created only the standard timeframe. First image I made manual trade based on 40M chart which I have created manually.
Red DOT cam on 20M and 40M however it is not on the 1H.
This morning how do I know where are we going? I have refresh all the indicators and look what I can see I has already crossed the 20m,40m lower PA then I decided that I just keep it and watch what will happen. I picked the pairs 30 min after NY open using core/cross.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: sam40.png Size: 163 KB
Click to Enlarge Name: sam41.png Size: 140 KB
  • #11,540
  • Edited 3:06am Sep 9, 2015 2:20am | Edited 3:06am
Quoting qarqoush
Hi all Me again, Here is the pick I made yesterday which still did not close . I was thinking outside of the box and I see all forex trader are using standard time frame. That means all forex traders will have the same targets and know what we know. However let us say that We can know way before them. using 10m,20m,40m,3H,6H time frame. I Tried with BT27, it created only the standard timeframe. First image I made manual trade based on 40M chart which I have created manually. Red DOT cam on 20M and 40M however it is not on the 1H. This morning how...
I have smiled a reversal them here we go. I call this "Know It before they Screw it"
Attached Image(s) (click to enlarge)
Click to Enlarge Name: sam42.png Size: 145 KB
Click to Enlarge Name: sam43.png Size: 147 KB
Click to Enlarge Name: sam44.png Size: 147 KB
8 traders viewing now