Genesis Matrix Trading indicator

Quoting techlover

Disliked

Hello traders, While browsing the forum i came across a Indicator Genesis and it is Amazing , but not sure why the thread is closed Note: iam not the developer of this Indicator , thanks to dev Look at the image this is recent performance of this indi {image} {image} and it is working well on all the pairs so i am thinking if any one can Automate this , i think it will prove to be a good Ea trade open condition Buy when Yellow Buy arrow mark appears and close when Pink sell arrow mark appears Sell When Pink arrow mark appears and close when Yellow...

Ignored

Quoting LFN

Disliked

{quote} There is a new thread for Genesis here: http://www.forexfactory.com/showthread.php?t=478578 Forex37 - Could you give a link to the Genesis Dashboard?

Ignored

#define EXIT_SLTP    0    // Exit on SL or TP hit
#define EXIT_GMTS_NS 1    // Exit on no signal or reverse signal
#define EXIT_GMTS_RS 2    // Exit on reverse signal
#define EXIT_HA_RS   3    // Exit on reverse heiken ashi signal
 
//---- input parameters
extern string    Trade_Settings="";
extern double    Trade_StartCapital=0;          // Start capital for the year. 0=Account balance
extern double    Trade_MaxLoss=70;              // Max loss in percent of capital after which to stop trading
extern string    Trade_Enable="00:00";          // Enable trading after this time
extern string    Trade_Disable="23:59";         // Disable trading after this time
extern string    Trade_EndOfWeek="18:30";       // Disable trading after this time on friday (weekend)
extern bool      Trade_CloseForWeekend=False;   // Close trades for the weekend
extern string    Order_Settings="";
extern double    Order_LotSize=1.0;             // Lotsize
extern int       Order_ExitSignal=1;            // 0=use SL/TP, 1=Use change from full matrix signal, 2=Use opposite matrix signal, 3=Heiken Ashi signal change
extern double    Order_TP=0;                    // Take profit. Set to 0 to use no TP
extern double    Order_SL=0;                    // Stoploss. Set to 0 to use no SL
extern double    Order_MoveToBE=0;              // Move to BE at profit level...
extern double    Order_BEOffset=0;              // Offset to add to BE position to account for the spread
extern double    Order_Slippage=5;              // Maximum Order slippage
extern bool      Order_TwoStep=True;            // Enter with TP/SL or add them after the position is opened for ECN brokers
extern string    GMTS_Settings="";
extern int       TVI_p=12;                      // TVI
extern int       TVI_u=5;                       // TVI
extern int       CCI_Period=20;                 // CCI Period
extern int       GannHiLo_Period=10;            // GannHiLo Period
extern int       T3MA_Period=8;                 // T3MA Period
extern double    T3MA_b=0.618;                  // T3MA b factor
extern string    Stoch_Settings="";
extern bool      Stoch_Enable=True;             // Stox K>D=Up, K<D=Down. Set both to the same parameters if you want to use one stoch only.
extern int       Stoch1_KPeriod=11;             // Stochastic 1
extern int       Stoch1_Slowing=3;
extern int       Stoch1_DPeriod=3;
extern int       Stoch2_TimeFrame=0;            // Stochastic 2
extern int       Stoch2_KPeriod=55;
extern int       Stoch2_Slowing=15;
extern int       Stoch2_DPeriod=10;

Quoting redwed

Disliked

Anybody got the same problem? {image} I can't run my ea because of this..

Ignored

Quoting Jacob911

Disliked

Xaphod, Why dodn't you add a SuperTrend HTF to your EA option? I try to coding this function but it not work because I don't understand how HTF custom indicator work on backtest. Jacobs

Ignored

Quoting Jacob911

Disliked

Hi Xaphod, What's time frame good for your xGMTS-EA.ex4 ? I try to test on M5 with default setting and no profit Regards, Jacobs

Ignored

Quote

Disliked

It was written a long time ago, so I can really say much about it. It enters on a full matrix and optional stochastics. The stochastic is not that easy to interpret. The EA just uses K over/under D.

    
      int shiftM15 = iBarShift(NULL,PERIOD_M15,Time[i]);
      int shiftM15Prev = iBarShift(NULL,PERIOD_M15,Time[i])+1;
      int shiftH1 = iBarShift(NULL,PERIOD_H1,Time[i]);
      int shiftH1Prev = iBarShift(NULL,PERIOD_H1,Time[1])+1;
      
    
      double TDIGr = iCustom(NULL,0,"TDI",4,i);
      double TDIRd = iCustom(NULL,0,"TDI",5,i);
      double TDIPrvGr = iCustom(NULL,0,"TDI",4,i+1);
      double TDIPrvRd = iCustom(NULL,0,"TDI",5,i+1);      
      double TDIYl = iCustom(NULL,0,"TDI",2,i);
      double TDIM15Gr = iCustom(NULL,PERIOD_M15,"TDI",4,shiftM15);
      double TDIM15Rd = iCustom(NULL,PERIOD_M15,"TDI",5,shiftM15);
      double TDIM15PrevGr = iCustom(NULL,PERIOD_M15,"TDI",4,shiftM15Prev);
      double TDIM15PrevRd = iCustom(NULL,PERIOD_M15,"TDI",5,shiftM15Prev);
      double TDIH1Gr = iCustom(NULL,PERIOD_H1,"TDI",4,shiftH1);
      double TDIH1Rd = iCustom(NULL,PERIOD_H1,"TDI",5,shiftH1);
      double TDIH1PrevGr = iCustom(NULL,PERIOD_H1,"TDI",4,shiftH1Prev);
      double TDIH1PrevRd = iCustom(NULL,PERIOD_H1,"TDI",4,shiftH1Prev);
      
      double TVIUp = iCustom(NULL,0,"GMX222",0,i);
      double TVIDn = iCustom(NULL,0,"GMX222",1,i);
      double CCIUp = iCustom(NULL,0,"GMX222",2,i);
      double CCIDn = iCustom(NULL,0,"GMX222",3,i);
      double GHLUp = iCustom(NULL,0,"GMX222",4,i);
      double GHLDn = iCustom(NULL,0,"GMX222",5,i);
      double T3Up  = iCustom(NULL,0,"GMX222",6,i);
      double T3Dn  = iCustom(NULL,0,"GMX222",7,i);
      
      double TVIUpH1 = iCustom(NULL,0,"GMX222",0,shiftH1);
      double TVIDnH1 = iCustom(NULL,0,"GMX222",1,shiftH1);
      double CCIUpH1 = iCustom(NULL,0,"GMX222",2,shiftH1);
      double CCIDnH1 = iCustom(NULL,0,"GMX222",3,shiftH1);
      double GHLUpH1 = iCustom(NULL,0,"GMX222",4,shiftH1);
      double GHLDnH1 = iCustom(NULL,0,"GMX222",5,shiftH1);
      double T3UpH1  = iCustom(NULL,0,"GMX222",6,shiftH1);
      double T3DnH1  = iCustom(NULL,0,"GMX222",7,shiftH1);
  
 
       if((TVIUp == 1.9 && CCIUp == 1.4 && GHLUp == 0.9 && T3Up == 0.4)&&  (TVIUpH1 == 1.9 && CCIUpH1 == 1.4 && GHLUpH1 == 0.9 && T3UpH1 == 0.4)&&TDIGr>TDIYl)      
        upArrow[i]= Low[i]-.0007;
       //---Down Arrow
       else if((TVIDn == 1.9 && CCIDn == 1.4 && GHLDn == 0.9 && T3Dn== 0.4)&& (TVIDnH1 == 1.9 && CCIDnH1 == 1.4 && GHLDnH1 == 0.9 && T3DnH1 == 0.4)&&TDIGr<TDIYl)
         downArrow[i]= High[i]+.0007;

Quoting fbrand79

Disliked

Hi Xaphod, I'm still new to mql4, but have been trying to make an indi that looks at current TF and a HTF with other filters then draws an arrow, but I'm not sure if this is correct as I have it as nothing is drawn. Please would you be so kind as to have a look. so the iCustom does not need any other params when calling GMX222.

Ignored

Quoting Xaphod

Disliked

{quote} You can use the mt4 debugger to set breakpoints and then step through the code a line at a time and view the state of the variables you are setting. That should enable you to see what data your icustom calls are returning and what your conditions are doing. Open the metaeditor user guide (F1) and read the chapter 'creating programs -> debugging' This is the page for the mt5 debugger which is probably similar: http://www.metatrader5.com/en/metaed...elopment/debug

Ignored

Quoting techlover

Disliked

Hello traders, While browsing the forum i came across a Indicator Genesis and it is Amazing , but not sure why the thread is closed Note: iam not the developer of this Indicator , thanks to dev Look at the image this is recent performance of this indi {image} {image} and it is working well on all the pairs so i am thinking if any one can Automate this , i think it will prove to be a good Ea trade open condition Buy when Yellow Buy arrow mark appears and close when Pink sell arrow mark appears Sell When Pink arrow mark appears and close when Yellow...

Ignored

Quoting liquidice

Disliked

I'd like to say thank you in the original thread by RJ but unfortunately the thread is closed, Thank you Xaphod, Wiz3003, RJ, Olivia, Cody, Oli (olivierforex) for this wonderful system, indies and template. This really helps me with my trade. Thank you Techlover as well for starting...

Ignored

Quoting heispark

Disliked

{quote} Why don't you post your question to this thread instead? https://www.forexfactory.com/showthr...64#post9923364

Ignored