Progress - The System

Price Action Example (Corrected)


Here is the rule corrected from AndyG Daily and H4 engulfing Price Action thread : http://www.forexfactory.com/showthread.php?t=429442 .

I test it it gives good result but the TP sometimes is very big and we need to exit manually

// ================================================================
// R RULE
// P_H4 P_D1
//=================================================================

Set_Rule (OP_BUYSELL, T_START, R_R, P_SIGNAL);

static double Bull_high = 0;

static double Bull_low = 0;

static double Bear_high = 0; static double Bear_low = 0;

static double Buy_SL, Buy_TP, Sell_SL, Sell_TP;

if (AndS (BAR, S_BULL_ENGULFING, P_D1))

{

Bull_high = SValue (HIGH, S_PREVIOUS, P_D1); // find the bull engulfing bar so I mark the high

Bull_low = SValue (LOW, S_PREVIOUS, P_D1);

}

if (AndS (BAR, S_BEAR_ENGULFING, P_D1))

{

Bear_low = SValue (LOW, S_PREVIOUS, P_D1); // find the bear engulfing bar so I mark the low

Bear_high = SValue (HIGH, S_PREVIOUS, P_D1);

}

if (Bull_high != 0 && SValue (CLOSE, S_PREVIOUS, P_H4) > Bull_high && RValue (OP_BUYSELL, T_BUYNBRTRADE, R_R) == 0)

{

Set_Rule (OP_BUY, T_STATUS, R_R, P_SIGNAL); // I do a Buy Trade ,

Buy_SL = (Ask - Bull_low)/ SYS_POINT;

Buy_TP = Buy_SL;

Bear_low = 0;

}

if (Bear_low != 0 && SValue (CLOSE, S_PREVIOUS, P_H4) < Bear_low && RValue (OP_BUYSELL, T_SELLNBRTRADE, R_R) == 0)

{

Set_Rule (OP_SELL, T_STATUS, R_R, P_SIGNAL); // I sell

Sell_SL = (Bear_high - Bid) / SYS_POINT;

Sell_TP = Sell_SL;

Bull_high = 0;

}

if (RValue (OP_BUYSELL, T_BUYNBRTRADE, R_R) != 0)

{

Set_Rule (OP_BUYSELL, T_BUYLOTSL, R_R, P_SIGNAL, Buy_SL); // Stop Loss low of the engulfing bar

Set_Rule (OP_BUYSELL, T_BUYLOTTP, R_R, P_SIGNAL, Buy_TP); // Take Profit

}

if (RValue (OP_BUYSELL, T_SELLNBRTRADE, R_R) != 0)

{

Set_Rule (OP_BUYSELL, T_SELLLOTSL, R_R, P_SIGNAL, Sell_SL); // High of the engulfing bar

Set_Rule (OP_BUYSELL, T_SELLLOTTP, R_R, P_SIGNAL, Sell_TP); // Take Profit

}

Command Panel

A new version of the command Panel displays tabs on currencies instead of brokers. The information is more usefull when we want to work on multiple currencies with the same broker. That's all what you are doing I think. Here is the picture of the Panel :


You launch PG_Expert on every window of your terminal and you connect in the same way. What you will see on the currency tab is the same of what you see in the PG_Engine Indicator that exists in indicators folder.

Here I have the same platform working on multiple Currencies. Every currency has it's PG_Expert and the same command Panel which is represented by the corresponding tabulation.

Here is GBPUSD



and EURUSD




The new version will not take PG_Brokers.csv in consideration so it will be useless, the new file will be PG_Symbols.csv. It will be created automatically if it doesn't exists. Everytime you use the Expert on a currency an entry is created. So you have nothing to do.

Shortly I'll put this new version.

Hi i installed everything i mean the new version and when i open my mt4 all i get is :
Cant open symbol file d:alpari/experts/files/PG_Symbols.csv

what's wrong?

Hi Micchaal,

Check if you are allowed to create files in experts/files folder ... you must be on Vista system so please be sure you are allowed to create files in this folder and if not you should change the folder properties ....

im trying to change it but it stays readonly the whole time

i guess im alone with it....

Ok Just put the file in attachment in experts/files folder and it should work ... you have the column of symbols and the column of port , check that the symbols in the file are the same of your broker symbols ...

thanks jurex for reply

it shows "not connected"
cant understand where is problem.

Hi bolbam,

Yes you are not connected to the Panel , for this just put the mouse in the upper-left corner of your screen and you should see the Panel command.
Second your screen is too small to see all the informations, )
Please tell me if things are ok

thanks jurex ,
things are not ok
one click trade panel found on upper left corner no panel command. But progress panel opened with the strating mt4 platform.

Yep, By looking at the pictures you are on GOLD symbol and the symbols in the Panel are GBPUSD, EURUSD, XAUUSD, there is no GOLD item ... this means that there is a problem with the GOLD Symbol, normally you should see a GOLD entry in the Panel automatically generated. You took the PG_Symbols.csv which was an example of a file for micchaal because he had the problem of creating the file... look what you can do :

First : go in experts/files and delete the file PG_Symbols.csv
Second : Drop PG_Expert on a currency like EURUSD
Third : If you don't see the panel appears automatically , just put your mouse in the upper left corner of your terminal
Fourth : You should see the Panel command with only the entry of your currency you choosen.

If things works then you go to the GOLD symbol and you do the same ... you should then have the GOLD entry added ... etc

By the way it is normal that the Panel will open with the start of your mt4 platform because you have PG_Expert running on at least a currency , but what is not normal is that it doesn't create the symbol entry and that's why you stay not connected... the mechanism normally is automatic ...

One more thing Bolbam, if you put PG_Symbols.csv because you have the same problem than Micchaal , so don't delete it just open the file and replace the symbol XAUUSD by GOLD and save the file ... things will work.. are you on windows Vista system also ?

thanks ,
you are right i ve the same problem like micchaal ,But
i use windows 7.

hi jurex,
it may be problem of operating system,
is windows vista must for progress system or it may run on windows 7 ?

Hi bolbam,

You are still on the problem ? I thougth it was resolved... Bolbam this happens usually because you don't have the permission to create the file in the experts/files folder... go to files folder and click on the rigth button of the mouse , you will see a menu appears where the last item is properties...
Select properties and you will have a dialog box where there is a tab called security....



choose the user-PCuser and click on the edit button and change check all the column Allow

It works on all Operating systems for windows

THANKS A LOT jurex,
from the beginning started to install on robo forex and finally it shows connected .

but fxopen need to click lots of yes tab for permit ??

Ok good it works on roboforex, now on fxopen I don't know why it ask the question .. go to tools menu in the MT4 terminal and you shoud have this as configuration :




check if it is the same bolbam

unchecked confirm DLL function calls

now its ok.

Which screenresolution does one need withthat all is displayed.