Go to specific dates in MT4 & 1M data from 01/2006

Quoting jeffreytp

Disliked

I need 1 minuted data beginning from January 2006, or earlier if possible to load into MT4. Then I would like for someway to be able to go to a specific date without scrolling backwards on the chart, which takes forever. Accucharts allows me to go to a specific date, but their 1 min data only goes back a few months. Any solutions for my dilema?

Ignored

Quoting sergiu

Disliked

Fast Navigation

There are various methods used in the Client Terminal to accelerate working. The following can be used for this purpose:

1. fast navigation box — a small box that appears in the lower left corner of the chart and allows to manage it;
2. accelerating (hot) keys — key combinations that are intended for acceleration of working with various functions of the program.

Fast Navigation Box

The fast navigation box is used for quick switching among charts and/or among chart periods, as well as for quick scrolling of the chart to the selected date. The fast navigation box of the active chart can be opened with the Enter key, then the fast navigation box will appear in the lower left part of the chart window. One can also move the cursor to the lower left part of the chart window and double-click the left mouse button after the http://www.forexfactory.com/i/cursor_fast_nav.gif icon has appeared.

http://www.forexfactory.com/i/win_fast_nav.gif

Format of commands in the fast navigation box:
1. [time (hours:minutes)] example: 08:30; 8:30;
2. [date] example: 2004.10.16; 16.10.2004; 16.10.04;
3. [date and time] example: 2004.10.16 8:30; 16.10.2004 8:30; 16.10.04 8:30;
4. [symbol] example: GBPUSD; EURUSD;
5. [chart period] example: M1; M5; M15; M30; H1; H4; D1; W1; MN;
6. [symbol], [chart period] example: GBPUSD, M30; EURUSD, D1;
Attention: It must be noted that only one of the above-listed commands can be executed in the fast navigation box.
To execute a command, one has to press the Enter key, and the Esc key - to close the box. To move the chart to a specific date and time, one has to input this date and time. For example, the command that allows to move to the bar received at 8:30 on October, 16 2004, will appear as "2004.10.16 08:30". Along with YYYY.MM.DD and DD.MM.YYYY formats, one can also use the DD.MM.YY format, but not the YY.MM.DD. The first zero in the time inputting can be skipped. For example, one can write "8:30" instead of "08:30". When changing a symbol, one should specify its full name. When specifying the chart period, one may skip the "M". At the "GBPUSD 30" command, as well as at the "GBPUSD M30", the symbol and period will respectively change for a 30-minutes chart of Great Britain Pound vs US Dollar.

Ignored

Quoting sergiu

Disliked

Fast Navigation

There are various methods used in the Client Terminal to accelerate working. The following can be used for this purpose:

1. fast navigation box — a small box that appears in the lower left corner of the chart and allows to manage it;
2. accelerating (hot) keys — key combinations that are intended for acceleration of working with various functions of the program.

Fast Navigation Box

The fast navigation box is used for quick switching among charts and/or among chart periods, as well as for quick scrolling of the chart to the selected date. The fast navigation box of the active chart can be opened with the Enter key, then the fast navigation box will appear in the lower left part of the chart window. One can also move the cursor to the lower left part of the chart window and double-click the left mouse button after the http://www.forexfactory.com/i/cursor_fast_nav.gif icon has appeared.

http://www.forexfactory.com/i/win_fast_nav.gif

Format of commands in the fast navigation box:
1. [time (hours:minutes)] example: 08:30; 8:30;
2. [date] example: 2004.10.16; 16.10.2004; 16.10.04;
3. [date and time] example: 2004.10.16 8:30; 16.10.2004 8:30; 16.10.04 8:30;
4. [symbol] example: GBPUSD; EURUSD;
5. [chart period] example: M1; M5; M15; M30; H1; H4; D1; W1; MN;
6. [symbol], [chart period] example: GBPUSD, M30; EURUSD, D1;
Attention: It must be noted that only one of the above-listed commands can be executed in the fast navigation box.
To execute a command, one has to press the Enter key, and the Esc key - to close the box. To move the chart to a specific date and time, one has to input this date and time. For example, the command that allows to move to the bar received at 8:30 on October, 16 2004, will appear as "2004.10.16 08:30". Along with YYYY.MM.DD and DD.MM.YYYY formats, one can also use the DD.MM.YY format, but not the YY.MM.DD. The first zero in the time inputting can be skipped. For example, one can write "8:30" instead of "08:30". When changing a symbol, one should specify its full name. When specifying the chart period, one may skip the "M". At the "GBPUSD 30" command, as well as at the "GBPUSD M30", the symbol and period will respectively change for a 30-minutes chart of Great Britain Pound vs US Dollar.

Ignored