JagzFX Free Trading Tools

this week

Hi, yes I will probably add an ANY mode to the next version of the MUX pin. But also check out the new version of EAX which supports up to 9 pins. I suspect that you can use the EAX ANY Entry mode to get what you need.

Thanks, already use EAX 9 Pin and it will not give me what I need so look forward to ANY mode.
Thnaks

update

I thought I'd share 2 tests which I've been running a for a few weeks with good results. Most weeks I've been getting +300-400 pips a week.

Thanks for making these PIN's jagzuk!

@rushamg @mrdfx thank you for sharing your setups and results!

Here's one of mine that has worked very well in the currently trending market. Not sure how much will get wiped in a reversal, or in ranging conditions ... many weeks of testing I fear.

[quote = rushamg; 11027907] {quote} update {image} [/ quote]
please send settings templates

sdsn
See the post before your post and read the comment.

rushamg, mrdfx and jagzuk had all shared their set files already, just open the images in a new window or tab and study then.


So, go-ahead and appreciate them

where did the inscription ZONE from the area on the pintle come from?

Take a little time to read the very first post of this thread, everything is there Check the pin settings, then match with their given images here, u will be able to replicate. Good luck.

[quote = Aar; 11033391] {quote} Потратьте немного времени, чтобы прочитать первое сообщение этой темы, все есть. Проверьте настройки булавки, затем сопоставьте их с этими изображениями здесь, и вы сможете реплицировать. Удачи. [/ Quote]


If you find such a pin, show it and its settings

Hi guys
have anyone MACD PIN?

Alright follow me mate,

1. Go to this post

2. Download the file Support & Resistance Pin


3. Read how it works in this post & to set offset hours read this post

4. Put it on a chart, set the settings as below



5. It will give you the signals that you asked for


Good luck.

Have you tried the free MACD PIN in this thread?
https://www.forexfactory.com/showthread.php?t=640158

I attached it,But it did not work at different brokers

JagzFX_EAX_MUX_v1_01 Updated MUX PIN.

I have added some new features to the MUX PIN.

Output modes.
There are now four different logic modes:

1. All Agree: Same as before, all Normal and Reversed inputs must agree for an output signal to be given.
2. Majority Agree: The Signal is based on the Majority Report from the Normal and Reversed inputs. E.g. if you have 3 input pins: 2 are buy, 1 is sell, the output will be buy.
3. Any: Left Priority, opposites Ignored. Any signal will create an output. If there are opposite signals (E.g. channel A: buy and channel C: sell) the signal on the left (Channel A) will take priority. The opposite signal (channel B) will be ignored).
4. Any: Left Priority, opposites Cancel. Any signal will create an output. If there are opposite signals (E.g. channel A: buy and channel C: sell) these will cancel each other and there will be no output.

Input Modes:
In addition to the Normal and Reverse input modes, I have added 2 Boolean modes. Inputs using one of these modes are not included in the All/Majority/Any calculations. Instead, the direction of the signal is ignored: either there is no signal (0); or there is a signal (buy,sell). This input is then used to override the output signal: to allow the output signal through, or block it.

1. Allow: If there is signal on this input, the output will be allowed. No signal = output blocked.
2. Block: If there is signal on this input, the output will be blocked. No signal = output allowed.

When might you use this? Let's say you have a strategy that you do not want to trade in a trending market (e.g. a ranging strategy). You could configure a PIN such as ADX to give a signal in a strong trend and then use this as a Block input. Now signals from your other pins will be blocked whenever there is a strong trend, regardless of the direction of the trend.

Trade of Day settings:
You can now choose on which days the signal is allowed. e.g. if you set Trade on Friday = false, signals will be blocked on Fridays.

Alert on New Signal
I have added Display Alert and Send Email options to my core PIN code, so as I update my PINS they will all inherit this ability. Meanwhile, if you have an older PIN without alerts, you can route it's signal into the MUX, and use the MUX to send the alerts.

Have fun with these. I am sure there will be a few new bugs and a lot more confused people.

[цитата = Ааре; 11034564] {цитата} Хорошо следовать за мной спариваться, 1. Перейдите к этому сообщению 2. Скачайте файл поддержке & сопротивление Pin {изображение} 3. Прочитайте , как это работает в этой должности и установить часы смещения прочитать это сообщение 4. Поместите его на диаграмму, установите настройки, как показано ниже {image} 5. Это даст вам сигналы, которые вы попросили {image} Удачи. [/ Quote]


thanks, but the problem is not solved, there is an inscription zone and you have a signal

Its not clear what your question is. Maybe you want to know what pins Rushmag is using! Or why SNR pin 3 picture is separated from the dashboard! Rushmag is using 2 pins. Pin 3 is SNR(that i described earlier how to put on your dashboard) & pin 4 is Eax_TDI_mtf pin. You can put both the pins on the dashboard or on another chart to pass signals to EAX dashboard. See the attached picture, hope this helps.

[quote = Aar; 11039107] {quote} Неясно, каков ваш вопрос. Может быть, вы хотите знать, какие штыри Rushmag используют! Или почему изображение SNR pin 3 отделено от приборной панели! Rushmag использует 2 контакта. Контакт 3 представляет собой SNR (что я ранее описал, как надеть на приборную панель), а контакт 4 - контакт Eax_TDI_mtf. Вы можете поместить оба вывода на приборную панель или на другой график, чтобы передавать сигналы на приборную панель EAX. См. Прикрепленную картинку, надеюсь, что это поможет. {} Изображение [/ цитата]

read carefully the question I ask why on one pin a signal is written and on the other zone

Hey all,

I have been away for a while.

But I am back. This is my Test for the week