this week
5
No Free Lunch but all the Free Coffee you can drink 736 replies
SWAP free, rollover free Broker? 15 replies
tools for easier trading with fratelli system 33 replies
All the most widely used tools = the strongest tools 5 replies
Disliked@jagzuk See below, have the SnR Pivot signal setup and need to send a signal to an EAX Pin using MUX. Current MUX combines (matches) signals for the output. Is it possible and can you make a MUX Pin that simply sends individual signals, input from the SnR Pivot Zone as below, to a single EAX Pin, in other words no combining signals? Reason, to isolate pairs into individual Pivot Zones. Thoughts? Thanks ... appreciated {image}Ignored
Disliked{quote} Hi, yes I will probably add an ANY mode to the next version of the MUX pin. But also check out the new version of EAX which supports up to 9 pins. I suspect that you can use the EAX ANY Entry mode to get what you need.Ignored
Dislikedwhere did the inscription ZONE from the area on the pintle come from? {image}Ignored
Disliked[quote = Aar; 11033391] {quote} Потратьте немного времени, чтобы прочитать первое сообщение этой темы, все есть. Проверьте...Ignored
Disliked{quote} Have you tried the free MACD PIN in this thread? https://www.forexfactory.com/showthread.php?t=640158Ignored
Input Modes:
In addition to the Normal and Reverse input modes, I have added 2 Boolean modes. Inputs using one of these modes are not included in the All/Majority/Any calculations. Instead, the direction of the signal is ignored: either there is no signal (0); or there is a signal (buy,sell). This input is then used to override the output signal: to allow the output signal through, or block it.
When might you use this? Let's say you have a strategy that you do not want to trade in a trending market (e.g. a ranging strategy). You could configure a PIN such as ADX to give a signal in a strong trend and then use this as a Block input. Now signals from your other pins will be blocked whenever there is a strong trend, regardless of the direction of the trend.
Trade of Day settings:
You can now choose on which days the signal is allowed. e.g. if you set Trade on Friday = false, signals will be blocked on Fridays.
Alert on New Signal
I have added Display Alert and Send Email options to my core PIN code, so as I update my PINS they will all inherit this ability. Meanwhile, if you have an older PIN without alerts, you can route it's signal into the MUX, and use the MUX to send the alerts.
Have fun with these. I am sure there will be a few new bugs and a lot more confused people.
Disliked[цитата = Ааре; 11034564] {цитата} Хорошо следовать за мной спариваться, 1. Перейдите к этому сообщению...Ignored