Mouteki Trading

Thanks Antra. Here is the chart I based the long trade on:

Sorry. I gave the wrong trendline points in the previous email regarding the USD/JPY. The "Supply" trendline (sloping downward) is the one I used.

Thanks antra and carmel, i am using sbfx for my demo and my data seems to line up with yours Antra.
I thought i was loosing it for a while.
cheers
geoff

P.S.
My uptrendline isn't the same as yours antra,as the candle 2 to the right of your point A hasn't closed, which i take it as incomplete so i am not counting it, therefore my uptrend line point A is 6 candles to the left of yours and much steeper, and has me short the yen at the moment.
cheers
geoff

This is my first post here at Forex Factory, though I've browsed the forums here many many times before. I just wanted to make sure I understood this method correctly. By my charts for the long position to take place for EUR/JPY, shouldn't there be an opening candle confirmation above 149.85-149.95? Someone else here so go long already, but since then it's dropped i noticed, and an opening candle never opened above the line i have in place. I'm just kinda looking for some feedback to see if I'm wrong or not thanks.

Note This is not a Pure Mouteki so please dont ask me to post the Indcator.

Hi
You are correct in still having your trend line 6 to the left as the current candle had not finished!!! ( this always gets me... )
Cheers
Antra

Congrats on first post!!!
Charts will always show different entries as the MT4 plats have different brokers and different data feeds....go with what you see on yours ...otherwise you will get real confused. See the recent posts on U/J...some had a signal to go long 2 hours ago yet my plat on alpari just gave it now.....
Hope this helps
Cheers

Depending on your broker/data your gonna get signals at different times. You may not even get some that other people get using the same model. Some brokers have bigger speads and different prices. It just depends on your broker/data. One thing I will suggest is to go on the models and data that works for you. My model may work at my broker and it may be a loser on yours. It could just depend on if that broker is stop hunting or if the pair is actually on the move, or any other number of reasons. So find out what works for you and use it. And don't worry about not getting every signal someone else gets. Just do you!

-The Drizzle

Yes, the issue of which charting service to use, particularly for 4 hour candles, does lead to some significantly different set-up signals.

I have Alpari, which sets off 00.00 CET, and InterbankFX, which sets off 00.00 GMT, creating a 2 hour split for the relevant candles. The candles are therefore totally different, especially once we get volatility.

FWIW, I am using IB for Mouteki, based on my belief that the bigboys trade off 4 hourly charts based on a 00.00 GMT commencement.

Anyway, as someone has already mentioned, it shouldn't matter too much - some entries will be early, others late, whilst others won't happen at all, but the end result should be broadly the same over the long run.

regards

Xerof

and greetings to my long lost friend Geoffrod !!

and greetings to my long lost friend Geoffrod !![/quote]

Hey greg from accross the ditch.
how goes it mate

Here is an update from all the trades that I opened at the beginning of the week. All these trades were opened based on the signal provided by the method being discussed.

GBPUSD (Long) Opened 1.8679 Closed 1.8749 +70 Pips
AUDUSD (Long) Opened .7529 Closed .7530 +1 Pip
NZDUSD (Long) Opened .6410 Closed .6486 +76P ips
AUDNZD (Long) Opened 1.1557 Closed 1.1708 +151 Pips
USDCAD (Short) Opened 1.1207 Closed 1.1158 +49 Pips

EURUSD (Long) Opened 1.2714 Still Open +10 Pips
CHFJPY (Long) Opened 94.66 Still Open -78 Pips
AUDJPY (Long) Opened 88.58 Still Open + 20 Pips


Total= +299 Pips


My plan is to close all trades by 4:30 PM EST no matter what posistion it is at (unless its trending for me then I will let it run for a sec). Remember I opened all these trades using the Mouteki system exactly as described here...Some of these trades took 3 days to close...The key to this system is patience.

i am newbie in here, but i got wonderfull strategic in trading with the system, i am interested to learn it.

GOOD JOB master Mouteki...thanks a lot..

waskito

If your having difficulty following what Moutaki system of trendlines is showing you u can down load TD with alerts for cross check as this indicator for MQ4 will show similar results for projections. On the TD the short horizontal line Red is the down projection target and the Green line horizontal is the up target projection.

TD is helpfull as the time frame is self adgusting and will show the shorter targets for smaller time frames. However i recommend 4hour as signels are fewer but more accurate and reward greater

Moutiki-------------thanks your work is excellent thank you


Heres the TD Indicator, just copy and paste in to custom indicators:

#property indicator_chart_window
#property indicator_buffers 2
#property indicator_color1 Blue /*Original #property indicator_color1 Red. Color of Upper TD Points*/
#property indicator_color2 Blue /*Original #property indicator_color2 Blue. Color of Lower TD Points*/
//---- input parameters
/* Mod 02: only one step, no back steps, only one target, no fractal trendlines,
no large arrow option for TD points, and added user changable colours and styles*/
/* Mod 03: Alerts Added. Horizontal Lines indicating where projections start from and
where alerts should be determined from re-enabled with Default of False.*/
/* Mod 03B: Bug where TD Points and TD Lines drawn in wrong place for
double, triple and quadruple tops or bottoms is fixed*/
extern bool AlertsOn = true; // Line added. Default is true.
extern bool Comments=True;/*Optional Comments. Default is false. Orginal variable called "Commen"*/
extern bool TrendLine=True;/*Default is true to draw current TD Lines*/
extern int TrendLineStyle=STYLE_SOLID;/*STYLE>_SOLID=0,DASH=1,_DOT=2,_DASHDOT=3,_DASHDDOTDOT=4. Line of code added from original.*/
extern int TrendLineWidth=2;/*Thinnest or allow dots and dashes = 0 or 1, Thinner=2, Medium=3,Thicker=4,Thickest=5. Line of code added from original.*/
extern color UpperTrendLineColour=DodgerBlue;/*Line of code added from original.*/
extern color LowerTrendLineColour=OrangeRed;/*Line of code added from original.*/
extern bool ProjectionLines=True;/*Default is True. These are the TD Price Projections. Original variable called "Take Prof"*/
extern int ProjectionLinesStyle=STYLE_SOLID;/*STYLE>_SOLID=0,DASH=1,_DOT=2,_DASHDOT=3,_DASHDDOTDOT=4. Line of code added from original.*/
extern int ProjectionLinesWidth=4;/*Thinnest or allow dots and dashes = 0 or 1, Thinner=2, Medium=3,Thicker=4,Thickest=5. Line of code added from original.*/
extern color UpperProjectionLineColour=LimeGreen;/*Line of code added from original.*/
extern color LowerProjectionLineColour=Red;/*Line of code added from original.*/
extern bool HorizontLine=False;/*Default is false. It seems the Horizontal Lines are were the code predicts price may cross TD line.*/
bool TD=False;/*Default is false. True setting draws up and down arrows instead of dots on TD Points creating more clutter.*/
int BackSteps=0;/*Used to be extern int now just int. Leave at 0*/
int ShowingSteps=1;/*Used to be extern int now just int. Leave at 1*/
bool FractalAsTD=false;/*Used to be extern bool now just bool. Leave at false, otherwise Trend Lines based on Fractal Points not TD Points*/

double TrendLineBreakUp=-1;//Line added.
bool TrendLineBreakUpFlag=False;//Line added.
double TrendLineBreakDown=-1;//Line added.
bool TrendLineBreakDownFlag=False;//Line added.
//---- buffers
double ExtMapBuffer1[];
double ExtMapBuffer2[];
//====================================================================
int init()
{
SetIndexStyle(0,DRAW_ARROW);
SetIndexArrow(0,217);
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexEmptyValue(0,0.0);
SetIndexStyle(1,DRAW_ARROW);
SetIndexArrow(1,218);
SetIndexBuffer(1,ExtMapBuffer2);
SetIndexEmptyValue(1,0.0);
for (int i=1;i<=10;i++)
{
ObjectDelete("HHL_"+i);ObjectDelete("HL_"+i);
ObjectDelete("HLL_"+i);ObjectDelete("LL_"+i);
ObjectDelete("HC1_"+i);
ObjectDelete("HC2_"+i);
ObjectDelete("HC3_"+i);
ObjectDelete("LC1_"+i);
ObjectDelete("LC2_"+i);
ObjectDelete("LC3_"+i);
}
Comment("");
return(0);
}
int deinit()
{
for (int i=1;i<=10;i++)
{
ObjectDelete("HHL_"+i);ObjectDelete("HL_"+i);
ObjectDelete("HLL_"+i);ObjectDelete("LL_"+i);
ObjectDelete("HC1_"+i);
ObjectDelete("HC2_"+i);
ObjectDelete("HC3_"+i);
ObjectDelete("LC1_"+i);
ObjectDelete("LC2_"+i);
ObjectDelete("LC3_"+i);
}
Comment("");
return(0);
}
//--------------------------------------------------------------------
int SetTDPoint(int B)//It seems B is the same as IndicatorCounted() function
{
int shift;
if (FractalAsTD==false)
{
//Print("B = ",B);
//Print("Bars = ",Bars);
//Print("IndicatorCounted() = ",IndicatorCounted());
for (shift=B;shift>1;shift--)
{
if (High[shift+1]<High[shift] && High[shift-1]<High[shift])// determine single top TD Point
ExtMapBuffer1[shift]=High[shift];// determine single top TD Point

if (High[shift+2]<High[shift] && High[shift+1]==High[shift]&& High[shift-1]<High[shift])//I added for double top
ExtMapBuffer1[shift]=High[shift];//I added for double top

if (High[shift+3]<High[shift] && High[shift+2]==High[shift]&& High[shift+1]==High[shift]//I added for triple top
&& High[shift-1]<High[shift])//I added for triple top
ExtMapBuffer1[shift]=High[shift];//I added for triple top

if (High[shift+4]<High[shift] && High[shift+3]==High[shift]&& High[shift+2]==High[shift]//I added for quadruple top
&& High[shift+1]==High[shift]//I added for quadruple top
&& High[shift-1]<High[shift])//I added for quadruple top
ExtMapBuffer1[shift]=High[shift];//I added for quadruple top

if (High[shift-1]>=High[shift])//I added for new way to determine Non-TD High Point
ExtMapBuffer1[shift]=0;//I added for new way to determine Non-TD High Point

//else ExtMapBuffer1[shift]=0;


if (Low[shift+1]>Low[shift] && Low[shift-1]>Low[shift])// determine single bottom TD Point
ExtMapBuffer2[shift]=Low[shift];// determine single bottom TD Point

if (Low[shift+2]>Low[shift] && Low[shift+1]==Low[shift] && Low[shift-1]>Low[shift])//I added for double bottom
ExtMapBuffer2[shift]=Low[shift];//I added for double bottom

if (Low[shift+3]>Low[shift] && Low[shift+2]==Low[shift] && Low[shift+1]==Low[shift]//I added for triple bottom
&& Low[shift-1]>Low[shift])//I added for triple bottom
ExtMapBuffer2[shift]=Low[shift];//I added for triple bottom

if (Low[shift+4]>Low[shift] && Low[shift+3]==Low[shift]&& Low[shift+2]==Low[shift] && Low[shift+1]==Low[shift]//I added for quadruple bottom
&& Low[shift-1]>Low[shift])//I added for quadruple bottom
ExtMapBuffer2[shift]=Low[shift];//I added for quadruple bottom

if (Low[shift-1]<=Low[shift])//I added
ExtMapBuffer2[shift]=0;//I added

//else ExtMapBuffer2[shift]=0;
}
ExtMapBuffer1[0]=0;
ExtMapBuffer2[0]=0;
ExtMapBuffer1[1]=0;
ExtMapBuffer2[1]=0;
}
else
{
for (shift=B;shift>3;shift--)
{
if (High[shift+1]<=High[shift] && High[shift-1]<High[shift] && High[shift+2]<=High[shift] && High[shift-2]<High[shift])
ExtMapBuffer1[shift]=High[shift];
else ExtMapBuffer1[shift]=0;
if (Low[shift+1]>=Low[shift] && Low[shift-1]>Low[shift] && Low[shift+2]>=Low[shift] && Low[shift-2]>Low[shift])
ExtMapBuffer2[shift]=Low[shift];
else ExtMapBuffer2[shift]=0;
}
ExtMapBuffer1[0]=0;
ExtMapBuffer2[0]=0;
ExtMapBuffer1[1]=0;
ExtMapBuffer2[1]=0;
ExtMapBuffer1[2]=0;
ExtMapBuffer2[2]=0;
}
return(0);
}
//--------------------------------------------------------------------
int GetHighTD(int P)
{
int i=0,j=0;
while (j<P)
{
i++;
while(ExtMapBuffer1[i]==0)
{i++;if(i>Bars-2)return(-1);}
j++;
}
return (i);
}
//--------------------------------------------------------------------
int GetNextHighTD(int P)
{
int i=P+1;
while(ExtMapBuffer1[i]<=High){i++;if(i>Bars-2)return(-1);}
return (i);
}
//--------------------------------------------------------------------
int GetLowTD(int P)
{
int i=0,j=0;
while (j<P)
{
i++;
while(ExtMapBuffer2[i]==0)
{i++;if(i>Bars-2)return(-1);}
j++;
}
return (i);
}
//--------------------------------------------------------------------
int GetNextLowTD(int P)
{
int i=P+1;
while(ExtMapBuffer2[i]>=Low || ExtMapBuffer2[i]==0){i++;if(i>Bars-2)return(-1);}
return (i);
}
//--------------------------------------------------------------------
int TrendLineHighTD(int H1,int H2,int Step,int Col)/*Draw Upper Trend Line*/
{
ObjectSet("HL_"+Step,OBJPROP_TIME1,Time[H2]);ObjectSet("HL_"+Step,OBJPROP_TIME2,Time[H1]);
ObjectSet("HL_"+Step,OBJPROP_PRICE1,High[H2]);ObjectSet("HL_"+Step,OBJPROP_PRICE2,High[H1]);
ObjectSet("HL_"+Step,OBJPROP_COLOR,UpperTrendLineColour);/*TEMP Original OBJPROP_COLOR,Col*/
if (Step==1)ObjectSet("HL_"+Step,OBJPROP_WIDTH,TrendLineWidth);/*Original OBJPROP_WIDTH,2*/
else ObjectSet("HL_"+Step,OBJPROP_WIDTH,1);
return(0);
}
//--------------------------------------------------------------------
int TrendLineLowTD(int L1,int L2,int Step,int Col)/*Draw Lower Trend Line*/
{
ObjectSet("LL_"+Step,OBJPROP_TIME1,Time[L2]);ObjectSet("LL_"+Step,OBJPROP_TIME2,Time[L1]);
ObjectSet("LL_"+Step,OBJPROP_PRICE1,Low[L2]);ObjectSet("LL_"+Step,OBJPROP_PRICE2,Low[L1]);
ObjectSet("LL_"+Step,OBJPROP_COLOR,LowerTrendLineColour);/*TEMP Original OBJPROP_COLOR,Col*/
if (Step==1)ObjectSet("LL_"+Step,OBJPROP_WIDTH,TrendLineWidth);/*Original OBJPROP_WIDTH,2*/
else ObjectSet("LL_"+Step,OBJPROP_WIDTH,1);
return(0);
}
//--------------------------------------------------------------------
int HorizontLineHighTD(int H1,int H2,int Step,double St,int Col)
{
ObjectSet("HHL_"+Step,OBJPROP_PRICE1,High[H2]-(High[H2]-High[H1])/(H2-H1)*H2);//HORIZONTAL HIGH LINE HEIGHT CALCULATION
ObjectSet("HHL_"+Step,OBJPROP_STYLE,St);
ObjectSet("HHL_"+Step,OBJPROP_COLOR,Col);
ObjectSet("HHL_"+Step,OBJPROP_BACK,True);//Line added
return(0);
}
//--------------------------------------------------------------------
int HorizontLineLowTD(int L1,int L2,int Step,double St,int Col)
{
ObjectSet("HLL_"+Step,OBJPROP_PRICE1,Low[L2]+(Low[L1]-Low[L2])/(L2-L1)*L2);//HORIZONTAL LOW LINE HEIGHT CALCULATION
ObjectSet("HLL_"+Step,OBJPROP_STYLE,St);
ObjectSet("HLL_"+Step,OBJPROP_COLOR,Col);
ObjectSet("HLL_"+Step,OBJPROP_BACK,True);//Line added
return(0);
}
//--------------------------------------------------------------------
string TakeProfitHighTD(int H1,int H2,int Step,int Col)/*Draw Buy TD Price Projection(s)*/
{
int i,ii,j=0;
string Comm="";
double kH,HC1,HC2,HC3,k,St;
kH=(High[H2]-High[H1])/(H2-H1);
while (NormalizeDouble(Point,j)==0)j++;
k=0;
for(i=H1;i>0;i--)if(Close[i]>High[H2]-kH*(H2-i)){k=High[H2]-kH*(H2-i);break;}
if (k>0)
{
Comm=Comm+"UTD_Line ("+DoubleToStr(High[H2]-kH*H2,j)+") broken at "+DoubleToStr(k,j)+", uptargets:\n";
ii=Lowest(NULL,0,MODE_LOW,H2-i,i);
HC1=High[H2]-kH*(H2-ii)-Low[ii];
HC2=High[H2]-kH*(H2-ii)-Close[ii];
ii=Lowest(NULL,0,MODE_CLOSE,H2-i,i);
HC3=High[H2]-kH*(H2-ii)-Close[ii];
St=TrendLineStyle;/*Original STYLE_SOLID*/
}
else
{
k=High[H2]-kH*H2;
Comm=Comm+"UTD_Line ("+DoubleToStr(k,j)+"), probable break-up targets:\n";
ii=Lowest(NULL,0,MODE_LOW,H2,0);
HC1=High[H2]-kH*(H2-ii)-Low[ii];
HC2=High[H2]-kH*(H2-ii)-Close[ii];
ii=Lowest(NULL,0,MODE_CLOSE,H2,0);
HC3=High[H2]-kH*(H2-ii)-Close[ii];
St=TrendLineStyle;/*Original STYLE_DASHDOT*/
}
ObjectSet("HL_"+Step,OBJPROP_STYLE,St);
Comm=Comm+"T1="+DoubleToStr(HC1+k,j)+" ("+DoubleToStr(HC1/Point,0)+"pts.)\n";//changed "pts.)" to "pts.)\n"
//Comm=Comm+" T2="+DoubleToStr(HC2+k,j)+" ("+DoubleToStr(HC2/Point,0)+"pts.)";
//Comm=Comm+" T3="+DoubleToStr(HC3+k,j)+" ("+DoubleToStr(HC3/Point,0)+"pts.)\n";
ObjectSet("HC1_"+Step,OBJPROP_TIME1,Time[H1]);ObjectSet("HC1_"+Step,OBJPROP_TIME2,Time[0]);
ObjectSet("HC1_"+Step,OBJPROP_PRICE1,HC1+k);ObjectSet("HC1_"+Step,OBJPROP_PRICE2,HC1+k);
ObjectSet("HC1_"+Step,OBJPROP_COLOR,Col);ObjectSet("HC1_"+Step,OBJPROP_STYLE,St);
//ObjectSet("HC2_"+Step,OBJPROP_TIME1,Time[H1]);ObjectSet("HC2_"+Step,OBJPROP_TIME2,Time[0]);
//ObjectSet("HC2_"+Step,OBJPROP_PRICE1,HC2+k);ObjectSet("HC2_"+Step,OBJPROP_PRICE2,HC2+k);
//ObjectSet("HC2_"+Step,OBJPROP_COLOR,Col);ObjectSet("HC2_"+Step,OBJPROP_STYLE,St);
//ObjectSet("HC3_"+Step,OBJPROP_TIME1,Time[H1]);ObjectSet("HC3_"+Step,OBJPROP_TIME2,Time[0]);
//ObjectSet("HC3_"+Step,OBJPROP_PRICE1,HC3+k);ObjectSet("HC3_"+Step,OBJPROP_PRICE2,HC3+k);
//ObjectSet("HC3_"+Step,OBJPROP_COLOR,Col);ObjectSet("HC3_"+Step,OBJPROP_STYLE,St);
if (Step==1)
{
ObjectSet("HC1_"+Step,OBJPROP_WIDTH,ProjectionLinesWidth);/*Original OBJPROP_WIDTH,2*/
ObjectSet("HC1_"+Step,OBJPROP_STYLE,ProjectionLinesStyle);/*This Line of code added from original. TD Upper Projection Line Style*/
// ObjectSet("HC2_"+Step,OBJPROP_WIDTH,2);
// ObjectSet("HC3_"+Step,OBJPROP_WIDTH,2);
}
else
{
ObjectSet("HC1_"+Step,OBJPROP_WIDTH,2);
// ObjectSet("HC2_"+Step,OBJPROP_WIDTH,2);
// ObjectSet("HC3_"+Step,OBJPROP_WIDTH,2);
}
return(Comm);
}
//--------------------------------------------------------------------
string TakeProfitLowTD(int L1,int L2,int Step,int Col)/*Draw Sell TD Price Projection(s)*/
{
int i,ii,j=0;
string Comm="";
double kL,LC1,LC2,LC3,k,St;
kL=(Low[L1]-Low[L2])/(L2-L1);
while (NormalizeDouble(Point,j)==0)j++;
k=0;
for(i=L1;i>0;i--)if(Close[i]<Low[L2]+kL*(L2-i)){k=Low[L2]+kL*(L2-i);break;}
if (k>0)
{
Comm=Comm+"LTD_Line ("+DoubleToStr(Low[L2]+kL*L2,j)+") broken at "+DoubleToStr(k,j)+", downtargets:\n";
ii=Highest(NULL,0,MODE_HIGH,L2-i,i);
LC1=High[ii]-(Low[L2]+kL*(L2-ii));
LC2=Close[ii]-(Low[L2]+kL*(L2-ii));
i=Highest(NULL,0,MODE_CLOSE,L2-i,i);
LC3=Close[ii]-(Low[L2]+kL*(L2-ii));
St=TrendLineStyle;/*Original STYLE_SOLID*/
}
else
{
k=Low[L2]+kL*L2;
Comm=Comm+"LTD_Line ("+DoubleToStr(k,j)+"), probable downbreak targets:\n";
ii=Highest(NULL,0,MODE_HIGH,L2,0);
LC1=High[ii]-(Low[L2]+kL*(L2-ii));
LC2=Close[ii]-(Low[L2]+kL*(L2-ii));
ii=Highest(NULL,0,MODE_CLOSE,L2,0);
LC3=Close[ii]-(Low[L2]+kL*(L2-ii));
St=TrendLineStyle;/*Original STYLE_DASHDOT*/
}
ObjectSet("LL_"+Step,OBJPROP_STYLE,St);
Comm=Comm+"T1="+DoubleToStr(k-LC1,j)+" ("+DoubleToStr(LC1/Point,0)+"pts.)\n";//changed "pts.)" to "pts.)\n"
//Comm=Comm+" T2="+DoubleToStr(k-LC2,j)+" ("+DoubleToStr(LC2/Point,0)+"pts.)";
//Comm=Comm+" T3="+DoubleToStr(k-LC3,j)+" ("+DoubleToStr(LC3/Point,0)+"pts.)\n";
ObjectSet("LC1_"+Step,OBJPROP_TIME1,Time[L1]);ObjectSet("LC1_"+Step,OBJPROP_TIME2,Time[0]);
ObjectSet("LC1_"+Step,OBJPROP_PRICE1,k-LC1);ObjectSet("LC1_"+Step,OBJPROP_PRICE2,k-LC1);
ObjectSet("LC1_"+Step,OBJPROP_COLOR,Col);ObjectSet("LC1_"+Step,OBJPROP_STYLE,St);
//ObjectSet("LC2_"+Step,OBJPROP_TIME1,Time[L1]);ObjectSet("LC2_"+Step,OBJPROP_TIME2,Time[0]);
//ObjectSet("LC2_"+Step,OBJPROP_PRICE1,k-LC2);ObjectSet("LC2_"+Step,OBJPROP_PRICE2,k-LC2);
//ObjectSet("LC2_"+Step,OBJPROP_COLOR,Col);ObjectSet("LC2_"+Step,OBJPROP_STYLE,St);
//ObjectSet("LC3_"+Step,OBJPROP_TIME1,Time[L1]);ObjectSet("LC3_"+Step,OBJPROP_TIME2,Time[0]);
//ObjectSet("LC3_"+Step,OBJPROP_PRICE1,k-LC3);ObjectSet("LC3_"+Step,OBJPROP_PRICE2,k-LC3);
//ObjectSet("LC3_"+Step,OBJPROP_COLOR,Col);ObjectSet("LC3_"+Step,OBJPROP_STYLE,St);
if (Step==1)
{
ObjectSet("LC1_"+Step,OBJPROP_WIDTH,ProjectionLinesWidth);/*Original OBJPROP_WIDTH,2*/
ObjectSet("LC1_"+Step,OBJPROP_STYLE,ProjectionLinesStyle);/*This Line of code added from original. TD Lower Projection Line Style*/
//ObjectSet("LC2_"+Step,OBJPROP_WIDTH,2);
//ObjectSet("LC3_"+Step,OBJPROP_WIDTH,2);
}
else
{
ObjectSet("LC1_"+Step,OBJPROP_WIDTH,2);
//ObjectSet("LC2_"+Step,OBJPROP_WIDTH,2);
//ObjectSet("LC3_"+Step,OBJPROP_WIDTH,2);
}
return(Comm);
}
//--------------------------------------------------------------------
string TDMain(int Step)
{
int H1,H2,L1,L2;
string Comm="--- step "+Step+" --------------------\n";
int i,j; while (NormalizeDouble(Point,j)==0)j++;
double Style;
double Col[20];Col[0]=UpperProjectionLineColour/*Original Col[0]=Red, Colour for Current Upper TD Projection*/;Col[2]=Magenta;Col[4]=Chocolate;Col[6]=Goldenrod;Col[8]=SlateBlue;
Col[1]=LowerProjectionLineColour/*Original Col[1]=Blue, Colour for Current Lower TD Projection*/;Col[3]=FireBrick;Col[5]=Green;Col[7]=MediumOrchid;Col[9]=CornflowerBlue;
Col[10]=Red;Col[12]=Magenta;Col[14]=Chocolate;Col[16]=Goldenrod;Col[18]=SlateBlue;
Col[11]=Blue;Col[13]=FireBrick;Col[15]=Green;Col[17]=MediumOrchid;Col[19]=CornflowerBlue;
Step=Step+BackSteps;
H1=GetHighTD(Step);
H2=GetNextHighTD(H1);
L1=GetLowTD(Step);
L2=GetNextLowTD(L1);
TrendLineBreakUp=High[H2]-(High[H2]-High[H1])/(H2-H1)*H2;//added line
TrendLineBreakDown=Low[L2]+(Low[L1]-Low[L2])/(L2-L1)*L2;//added line
if (H1<0)Comm=Comm+"UTD no TD up-point \n";
else
if (H2<0)Comm=Comm+"UTD no TD point-upper then last one ("+DoubleToStr(High[H1],j)+")\n";
else Comm=Comm+"UTD "+DoubleToStr(High[H2],j)+" "+DoubleToStr(High[H1],j)+"\n";
if (L1<0)Comm=Comm+"LTD no TD down-point \n";
else
if (L2<0)Comm=Comm+"LTD no TD point-lower then last one ("+DoubleToStr(Low[L1],j)+")\n";
else Comm=Comm+"LTD "+DoubleToStr(Low[L2],j)+" "+DoubleToStr(Low[L1],j)+"\n";
//-----------------------------------------------------------------------------------
if (Step==1)Style=STYLE_SOLID;
else Style=STYLE_DOT;
if (H1>0 && H2>0)
{
if (TrendLine==1)
{
ObjectCreate("HL_"+Step,OBJ_TREND,0,0,0,0,0);
TrendLineHighTD(H1,H2,Step,Col[Step*2-2]);
}
else ObjectDelete("HL_"+Step);
if (HorizontLine==1 && Step==1)
{
ObjectCreate("HHL_"+Step,OBJ_HLINE,0,0,0,0,0);
ObjectSet("HHL_"+Step,OBJPROP_BACK,True);//Line added
HorizontLineHighTD(H1,H2,Step,Style,Col[Step*2-2]);
}
else ObjectDelete("HHL_"+Step);
if (ProjectionLines==1)
{
ObjectCreate("HC1_"+Step,OBJ_TREND,0,0,0,0,0);
ObjectCreate("HC2_"+Step,OBJ_TREND,0,0,0,0,0);
ObjectCreate("HC3_"+Step,OBJ_TREND,0,0,0,0,0);
Comm=Comm+TakeProfitHighTD(H1,H2,Step,Col[Step*2-2]);
}
else
{
ObjectDelete("HC1_"+Step);
ObjectDelete("HC2_"+Step);
ObjectDelete("HC3_"+Step);
}
}

//-----------------------------------------------------------------------------------
if (L1>0 && L2>0)
{
if (TrendLine==1)
{
ObjectCreate("LL_"+Step,OBJ_TREND,0,0,0,0,0);
TrendLineLowTD(L1,L2,Step,Col[Step*2-1]);
}
else ObjectDelete("LL_"+Step);
if (HorizontLine==1 && Step==1)
{
ObjectCreate("HLL_"+Step,OBJ_HLINE,0,0,0,0,0);
ObjectSet("HLL_"+Step,OBJPROP_BACK,True);//Line added
HorizontLineLowTD(L1,L2,Step,Style,Col[Step*2-1]);
}
else ObjectDelete("HLL_"+Step);
if (ProjectionLines==1)
{
ObjectCreate("LC1_"+Step,OBJ_TREND,0,0,0,0,0);
ObjectCreate("LC2_"+Step,OBJ_TREND,0,0,0,0,0);
ObjectCreate("LC3_"+Step,OBJ_TREND,0,0,0,0,0);
Comm=Comm+TakeProfitLowTD(L1,L2,Step,Col[Step*2-1]);
}
else
{
ObjectDelete("LC1_"+Step);
ObjectDelete("LC2_"+Step);
ObjectDelete("LC3_"+Step);
}
}
//--------------------------------------------------------------------
if(AlertsOn)//added this Alerts section
{
//Print("Alerts On");

if(Close[0]>TrendLineBreakUp && TrendLineBreakUpFlag==False)
{
//Print("Upper TrendLine Break ",Symbol()," ",Period()," ",Bid);
Alert("UTL Break>",TrendLineBreakUp," on ",Symbol()," ",Period()," @ ",Bid);
TrendLineBreakUpFlag=True;
}
if(Close[0]<TrendLineBreakDown && TrendLineBreakDownFlag==False)
{
//Print("Lower Trendline Break ",Symbol()," ",Period()," ",Bid);
Alert("LTL Break<",TrendLineBreakDown," on ",Symbol()," ",Period()," @ ",Bid);
TrendLineBreakDownFlag=True;
}
//--------------------------------------------------------------------
}
return(Comm);
}
//--------------------------------------------------------------------
int start()
{
string Comm="";
SetTDPoint(Bars-1);
if (TD==1)
{
SetIndexArrow(0,217);
SetIndexArrow(1,218);
}
else
{
SetIndexArrow(0,160);
SetIndexArrow(1,160);
}
if (ShowingSteps>10)
{
Comment("ShowingSteps readings 0 - 10");
return(0);
}
for (int i=1;i<=ShowingSteps;i++)Comm=Comm+TDMain(i);
Comm=Comm+"------------------------------------\nShowingSteps="+ShowingSteps+"\nBackSteps="+BackSteps;
if (FractalAsTD==true)Comm=Comm+"\nFractals";
else Comm=Comm+"\nTD point";
if (Comments==1)Comment(Comm);
else Comment("");
return(0);
}

//+------------------------------------------------------------------+

Ok, straight up, since I can't take people talking shit saying that I left this thread, I will take a minute and sum up what is up with me. I am currently full time enrolled in college for my MBA. I just started my classes in September. I run a private trading company also where I must spent most of my free time away from school talking to clients. I am trying to help the public here but I have priorities in my life and school and work come before this public forum...With all this said, I have little free time which I am not wanting to spend in a thread with people just running their mouths saying im copying someone else's system and other such accusations. So, when I have time I will continue my posts, if you would like to wait for the continuation of my thread than so be it. If you want to just sit around and tell others I fled the scene, than I hope you leave my thread. For God's sake people, it hasn't even been a week since I have created this thread, a man can only work so fast. I have not fled the thread, I am just pre-occupied with priorities at the moment, more will come soon...by this Sunday I should have posted my next presentation...I hope not to offend anyone but to inform everyone...Hope you all understand...
-Mouteki

Thanks for the quick update. Much appreciated. Pardon my attempt to be humurous"
Due respect~

Understand 100% and more than happy to wait. Sadly this is what happens on forums and everyone wants it NOW. Plesae ignore such posts as there are many people here who are very eager to follow up on your posts. To everyone here I hope we can all remain patient be thankful for the time Moutekitrader has taken to share his system/method with us for FREE. Patience is a virtue Many thanks Moutekitrader!!!

From a personal point of veiw, it matters not if you copied someone else's system or it is your original idea.

The most important thing is that you brought it to my attention and have shown me how to use it. This could be the final piece in my trading puzzle and I for one am very greatful.

Thank you!

Neil.

Mouteki great simple system. My own experience so far has proved over and over again that the simple ideas are often the best. the hardest part I have found is the mental discpline to wait for the best setups.

Speaking of which USDCAD has just given a setup.

Hiachiever.

Is anybody going Long on usd/chf? the next candle would be the signal(I think....)

Tried to copy and paste but it didn't work.

Is there something I'm missing?

Jim