Dislikedso you better go to another thread to promote your tool. LOL If you think this is better then N+.... suit your self.Ignored
I'll share some thoughts on this "Radio Shack Electrical Multi-Meter Thingy for MT4" later .........
forgot to inform is called "MT4 ProTrader" but not good to search google for just see my profile instead.
So I am not going to break down their creation and argue that our tool is better. I am sure their tool has been beneficial to some users and that is all that matters.
With that being said and since @Mt4proo1 made the conclusion that N+ is deficient by way of comparison, my first thought when I saw this thing or its predecessor FX Multimeter 3 or 4 a few years ago was that it seemed as if it was designed for Electricians, not actual Traders.
The obvious glaring issue in comparison to NITRO+ is efficiency of space used. Its compact view occupies roughly 300% more space than N+ Full View, yet is only performing about 10%-15% of the total brute calculations. It might actually be closer to only 5% since N+ aggregates up to six time frames with each new tick.
NITRO+
- #103
- Edited 11:04am Aug 26, 2013 10:11am | Edited 11:04am
((( click ))) to view an example of how much more Multi-Pair, Multi-Timeframe information can be gathered from more efficiently used space. Full image will open in a new tab or view attached image further below. Click Zoom once popped to view full size:
:::::::::::::: http://california.wyfxco.com/GBPJPY-...Click2View.png
NITRO+
:::::::::::::: http://california.wyfxco.com/GBPJPY-...Click2View.png
NITRO+
- #104
- Aug 27, 2013 10:19am Aug 27, 2013 10:19am
((( click ))) to view an example of how much more Multi-Pair, Multi-Timeframe information can be gathered from more efficiently used space. Full image will open in a new tab or view attached image further below. Click Zoom once popped to view full size: :::::::::::::: {image} {image}
sorry to tell you sirs my indy was sell gbpjpy/eurjpy,chfjpy you say buy in Attached Image (click to enlarge) so this is just not a good signal indy at all from which it looks.Now is far to late for change of a gbp tp to have the right profit. Now gbp is at the 150 at which where you have enter in first time and you just loose 400 pips in one whole day. Is just not as right for signals imho
Wyfx,
Any update on Flow(+). Had a read through the info you have on the site. Can you explain a bit of how it will complement Nitro+ and how it could be used in a trading system.
I'm also interested to hear about what types of systems that you've tested Nitro+ with (besides what you have on your site) and how you have found it to work well. E.g. Price action breakouts, momentum, reversals, ma's, etc...
I have found it to work really well with momentum price action patterns, such as inside bars.
Also, I really like the look of your iDrag EA. Any chance you are going to make this available. Would love to get my hands on it
Cheers,
Miike
Any update on Flow(+). Had a read through the info you have on the site. Can you explain a bit of how it will complement Nitro+ and how it could be used in a trading system.
I'm also interested to hear about what types of systems that you've tested Nitro+ with (besides what you have on your site) and how you have found it to work well. E.g. Price action breakouts, momentum, reversals, ma's, etc...
I have found it to work really well with momentum price action patterns, such as inside bars.
Also, I really like the look of your iDrag EA. Any chance you are going to make this available. Would love to get my hands on it
Cheers,
Miike
@Miiiiiike - good to hear from you.
I am pretty sure you already know this because I think it was you (or another mike spelled miiiiiiiike) suggesting DLLs last spring that we were trying to figure out from other apps, but for other Users... iDrag was never a Trade Manager. It was an "EA" only by classification because it dealt directly with positions. Its only function was to allow for dragging SLs, TPs, Limits, Stops directly on the chart.
So because Metaquotes has finally given this to us natively and did such a great job at doing so .... I think idrag may now be in my recycle bin. Other than some xtra dedicated options like line width and colorthat will probably added in upcoming builds, I am very happy with it. I love it. It is also stable and glitch-free which idrag was not.
FLOW+ ala-carte is completed and as shown can be added to top or bottom. If top, NITRO+ price & symbol can be turned off so F+ can move further down. I'm still working on how different LBs are handled and displayed. As evident with mt4prooo kindly posting a mirror site download link above, having to now figure out software protection is causing problems. Especially because I do not want multiple password entries for multiple components. Ya know?
Yes, exactly. Momentum+Breakouts Intraday.
-5M 15M 30M (1H) Intraday- Time pyramid of meter is centered in the 15M-30M area. Momentum and breakouts but only in the direction of prevailing trend as captured by T2. Though, as many Users have proven even over time, 100% can prove an uncanny and reliable trigger to not only dump any remaining units not already cleared thru preset TPs, but to also stop&reverse .... as an occassional method to mix it up and create some strategy variance. Breakout/Breakdown/Fundamental Spike from a very wide selection of pair candidates is really the only logical method intra, Don't you think? No matter what tool or combination of tools is used?
-(1H) 4H D1 WK Position- Time pyramid of meter centered in the D1 area. Sustained Trend Following with above/below 200 MA as guide. Once positions are established for combined reasons, moves above 50% become opportunities for action such as adding-to position when fresh off of retracement or to start taking some profit. 0% and even the opposite 50% become support levels and areas to add-to position on retracement. Mean Reversion only really safe for FX on Weekly at extreme, multi-year S&L levels such as for example CHFJPY(possibly right now), GBPAUD-CAD-NZD-NOK-SGD/EURAUD-CAD-NZD-NOK-SGD and the like. 95% - 100% far more risky as an overbought/oversold trigger like on shorter TFS above to take opposite action as the meter can spend a great deal of time here as price continues against. For example, GOLD+SILVER 2006-2011
..... i'll expand later on this last question and wondering if you apply momentum price action patterns, such as inside bars... equally to both intraday+non-intraday. Or if you only meant intraday. Oh, and I wanted to ask you which session or sessions you are trading or instead when are you on alert for breakouts? During this time of NY open and maybe lesser towards the first few hours of London?
NITRO+
I really like the look of your iDrag EA. Any chance you are going to make this available. Would love to get my hands on it
So because Metaquotes has finally given this to us natively and did such a great job at doing so .... I think idrag may now be in my recycle bin. Other than some xtra dedicated options like line width and colorthat will probably added in upcoming builds, I am very happy with it. I love it. It is also stable and glitch-free which idrag was not.
Wyfx, Any update on Flow(+). Had a read through the info you have on the site. Can you explain a bit of how it will complement Nitro+ and how it could be used in a trading system.
I'm also interested to hear about what types of systems that you've tested Nitro+ with (besides what you have on your site) and how you have found it to work well. E.g. Price action breakouts, momentum, reversals, ma's, etc... I have found it to work really well with momentum price action patterns, such as inside bars.
-5M 15M 30M (1H) Intraday- Time pyramid of meter is centered in the 15M-30M area. Momentum and breakouts but only in the direction of prevailing trend as captured by T2. Though, as many Users have proven even over time, 100% can prove an uncanny and reliable trigger to not only dump any remaining units not already cleared thru preset TPs, but to also stop&reverse .... as an occassional method to mix it up and create some strategy variance. Breakout/Breakdown/Fundamental Spike from a very wide selection of pair candidates is really the only logical method intra, Don't you think? No matter what tool or combination of tools is used?
-(1H) 4H D1 WK Position- Time pyramid of meter centered in the D1 area. Sustained Trend Following with above/below 200 MA as guide. Once positions are established for combined reasons, moves above 50% become opportunities for action such as adding-to position when fresh off of retracement or to start taking some profit. 0% and even the opposite 50% become support levels and areas to add-to position on retracement. Mean Reversion only really safe for FX on Weekly at extreme, multi-year S&L levels such as for example CHFJPY(possibly right now), GBPAUD-CAD-NZD-NOK-SGD/EURAUD-CAD-NZD-NOK-SGD and the like. 95% - 100% far more risky as an overbought/oversold trigger like on shorter TFS above to take opposite action as the meter can spend a great deal of time here as price continues against. For example, GOLD+SILVER 2006-2011
..... i'll expand later on this last question and wondering if you apply momentum price action patterns, such as inside bars... equally to both intraday+non-intraday. Or if you only meant intraday. Oh, and I wanted to ask you which session or sessions you are trading or instead when are you on alert for breakouts? During this time of NY open and maybe lesser towards the first few hours of London?
NITRO+
MT4Pro001, are you an experienced trader ? Because it seems you are an experienced marketeer.
great steady equity curve.
been wondering if you had luck with the EA and C('0,245,30') or if you need the mq4 source. I'll just send it so you have it
NITRO+
@Miiiiiike - good to hear from you. {quote} I am pretty sure you already know this because I think it was you (or another mike spelled miiiiiiiike) suggesting DLLs last spring that we were trying to figure out from other apps, but for other Users... iDrag was never a Trade Manager. It was an "EA" only by classification because it dealt directly with positions. Its only function was to allow for dragging SLs, TPs, Limits, Stops directly on the chart. So because Metaquotes has finally given this to us natively and did such a great job at doing so...
Been a while, kicked myself off trading due to commitments.
Back on the horse now
That drag feature in MT4 is awesome...I feel stupid saying this, but I didn't even know it was there until you mentioned it!
Looking forward to Flow+, if your looking for a beta tester, let me know
Great to hear about your testing with momentum style trading. I still love trading reversals, but I've found from my own testing that my results with momentum trading are far better. By better I mean, higher winning percentage, lower draw down average, smaller stop loss, better risk/reward ratio and they are more frequent
Are you looking at any further features,indicators or addons after Flow+ is released?
Also, have you tried Nitro+ on windows 8, I run it on 7 and am looking for a new tablet with windows 8 to trade with MT4 desktop
Cheers,
Miike
{quote} @miike - I don't think the desktop MT4 works with the Windows RT version that uses ARM such as Nvidia Tegra. I could be wrong. Though I'm sure your lookin at x86 since they are falling in price so quickly. I'll get to other ??s NITRO+
Have been eyeing off the Surface Pro and few other cheaper tablets available.
Cheers,
Miike
Was referring to the x86 windows 8 version, nor RT
As a footnote though and a warning- it does not play well with non-default DPI settings as alerted and outlined in the Additional Tips to Ensure Success section at the bottom of the N+ Installation Page. And I think the Surface even comes preloaded with the DPI settings zoomed to 125% or 150% because of its 1920x1080 resolution on a 10" screen netting 200+ppi.
I am in no way suggesting harware decisions should be based on a single tool, I am just making sure you are aware.
But great news! If you are like me and could care less about any of the toolbars in MT4 and just want to see your large charts, be able to One-Click, and be able to drag your orders+positions directly on whichever chart is maximized or whichever maximized chart you have dragged a pair onto ... then all is great with the world. You can run MT4 as Administrator and right-click to reveal the Compatibility Tab. Then, put a checkmark in the box next to 'Disable display scaling on high DPI settings'
I think 8.1 Blue is supposed to improve this Legacy UIs/ High DPI problem somehow. But I do not see how it can be done just by adding on some additional settings adjustments. I think the extra settings will only be to further improve support for separate DPI scaling on multiple displays like they already gave us in an update, which is still important regardless.
One of the great things about Windows 8 is native USB 3.0 support. This means up to 5 external GPUs for multiple 2560x1440 monitors in addition to your built in mini Displayport giving you 7 total displays with your Surface. USB 2.0 adapters just don't work right even for static charting, at least not for 1440. The Startech DP 3.0s work just as well as any Laptop Integrated such as the Intel HD in Surface, I would bet. On a Desktop, Nview picks it up as if I had a third Quadro installed. Now playing Battlefied3 or Crysis3 at 100FPS? I have no idea. I don't know what Battlefield or a Crysis3 even is.
A solution from us for N+ would be to code 2 additional versions, one with all the graphics adjusted correctly for 125% DPI Zoom, and another to 150%. I was really hoping to avoid this. I was hoping 8.1 would be the solution. I see there is some sort of preview from Microsoft ... so I guess I'll find out soon.
Or there is a leaked 8.1 iso on PirateBay from Russia, of course .... already preloaded with keyloggers and password scanners, yay!
NITRO+
Hello Sir, Tonight I downloaded the version Ashley sent me the link for. Does everything look okay now? Thanks! {image}
ClearType OFF
ClearType ON
I was trying to find the hotkey that pulls up the 3D aero to flip through all opens and I guess I pulled up the magnifying glass. In this there is a setting to turn ClearType ON/OFF.
Main entrance is probably in Control Panel > Display.
NITRO+
.... and when using Remote Desktop, selecting any connection speed lower than 10Mbps will automatically deselect Font smoothing. ClearType is referred to as Font Smoothing in Remote Desktop. So, this is then equivalent to turning ClearType "Off" as shown in the pictures in the previous post.
Selecting Automatic with a slow internet connection or high ping to the Remote may also then deselect various boxes below including Font Smoothing.
In any instance, the Font Smoothing box can manually be turned On no matter what the connection speed is. I cannot imagine ClearType would increase bandwidth so much by itself to make any Remote Connection prohibitive. In my experience after the initial workspace creation, anything above a consistent and stable 4Mbps and below 120ms ping is plenty and allows being able to keep all boxes selected.
Though maybe those in rural parts of the world with only a 3G mobile connection need to save all the Kb they can to even make basic Remote possible.
NITRO+
Selecting Automatic with a slow internet connection or high ping to the Remote may also then deselect various boxes below including Font Smoothing.
In any instance, the Font Smoothing box can manually be turned On no matter what the connection speed is. I cannot imagine ClearType would increase bandwidth so much by itself to make any Remote Connection prohibitive. In my experience after the initial workspace creation, anything above a consistent and stable 4Mbps and below 120ms ping is plenty and allows being able to keep all boxes selected.
Though maybe those in rural parts of the world with only a 3G mobile connection need to save all the Kb they can to even make basic Remote possible.
NITRO+