Dashboard TZ | Page 327 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard TZ
Exit Attachments

Dashboard TZ

  • #6,521
  • Apr 8, 2017 12:22pm Apr 8, 2017 12:22pm
Quoting jenbols
{quote} I have Tab Eax / Tab Dashpin / Tab Css (server) / Tab Css (Visual mode-non server) Time Frame of Chart on H1 / Set H1/H4/D1 if sets are 15M/H1/H4 i select chart Tf 15 min photo taken from Visual mode.. okay i read again what you just said ..
It's right. Chart TF controls duration and moment of signal. Lower chart TF faster entry ( because signal happens at candle close where signal happens) but lower signal duration ( signals only have one candle duration).

Quoting jenbols
{quote} What the hell.... you are right .... real was on, but i didnt do it .. normally is always off must have been rush mistake when i go too fast .. Well thank you for that
It's for try guess where signal will happens inside candle ( try remove mtf effect in signals) But don't works well.
Try don't lose pants never...
  • #6,522
  • Apr 8, 2017 12:27pm Apr 8, 2017 12:27pm
Attached Image (click to enlarge)
Click to Enlarge Name: css level 2 increse BrainBoss says so.png Size: 122 KB


Yes Smaller Tf catch every wave , really dont like it .. best higher Tfs, but SL will be bigger risk higher
so if in Auto need to reduce pairs ... exclude all the Chf pairs too messy and fake ranging
The arriving better than the arrival, the journey has just started
  • #6,523
  • Apr 8, 2017 12:29pm Apr 8, 2017 12:29pm
Quoting jenbols
{image}
Entry threshold = level 1 ( solid horizontal line)
Exit threshold = level 2 ( dotted horizontal line)
Try don't lose pants never...
  • #6,524
  • Apr 8, 2017 12:37pm Apr 8, 2017 12:37pm
Quoting braintheboss
{quote} Entry threshold = level 1 ( solid horizontal line) Exit threshold = level 2 ( dotted horizontal line)
Okay cool yes i like to keep those levels to 1/3 or 1/4
1/2 are too close to each others
I need to keep in Mind that Css works on LEVELS and not on Crosses
The arriving better than the arrival, the journey has just started
  • #6,525
  • Apr 8, 2017 12:39pm Apr 8, 2017 12:39pm
Quoting jenbols
{image} Yes Smaller Tf catch every wave , really dont like it .. best higher Tfs, but SL will be bigger risk higher so if in Auto need to reduce pairs ... exclude all the Chf pairs too messy and fake ranging
I use EAX adr 50 for remove bad pairs. In very low pairs I can take an entry 20/25 pips after swing. That let me enough room for TP ( 20/30 pips)
Try don't lose pants never...
  • #6,526
  • Apr 8, 2017 12:47pm Apr 8, 2017 12:47pm
Quoting braintheboss
{quote} I use EAX adr 50 for remove bad pairs. In very low pairs I can take an entry 20/25 pips after swing. That let me enough room for TP ( 20/30 pips)
OK so days to look back you put 50 ...
i never enabled it ... but will try .. i enable it but keep it not default trigger
i will enable to check after Japan MON
I never Tried PSO daily pips since open and wonder if i should to _
Will see
Attached Image (click to enlarge)
Click to Enlarge Name: Adr Eax .jpg Size: 118 KB
The arriving better than the arrival, the journey has just started
  • #6,527
  • Apr 8, 2017 12:50pm Apr 8, 2017 12:50pm
Quoting jenbols
{quote} OK so days to look back you put 50 ... i never enabled it ... but will try .. i enable it but keep it not default trigger i will enable to check after Japan MON I never Tried PSO daily pips since open and wonder if i should to _ Will see {image}
Lookback 20, adr 50. I don't use PSO. Only adr and spread filter in EAX
Try don't lose pants never...
  • #6,528
  • Apr 8, 2017 12:53pm Apr 8, 2017 12:53pm
Quoting braintheboss
{quote} I use EAX adr 50 for remove bad pairs. In very low pairs I can take an entry 20/25 pips after swing. That let me enough room for TP ( 20/30 pips)
,,,and sorry Brain again .. But what could be the difference between
(1) Loading CSS by DashPin and so the signal From CSS go first to DashPin channel 1 and then go to Eax
and
(2) Loading Css Directly with the Eax Pin
I will need to try this too
The arriving better than the arrival, the journey has just started
  • #6,529
  • Apr 8, 2017 1:09pm Apr 8, 2017 1:09pm
Quoting jenbols
{quote} ,,,and sorry Brain again .. But what could be the difference between (1) Loading CSS by DashPin and so the signal From CSS go first to DashPin channel 1 and then go to Eax and (2) Loading Css Directly with the Eax Pin I will need to try this too
It's same. I use DashPin because I have more flexibility to add or remove tools in the mix. But for simple setups you don't need DashPin
Try don't lose pants never...
  • #6,530
  • Apr 8, 2017 1:17pm Apr 8, 2017 1:17pm
Quoting braintheboss
{quote} It's same. I use DashPin because I have more flexibility to add or remove tools in the mix. But for simple setups you don't need DashPin
Yeah, true ....
All it is better and more clear now ...
Little note here in tab experts ... about Css but i am using previous version
and will download the one with Css Native Ma maybe problem will be solved
Have A Great Saturday and thank you for Help
Attached Image (click to enlarge)
Click to Enlarge Name: css too slow update - tab expert.jpg Size: 59 KB
The arriving better than the arrival, the journey has just started
  • #6,531
  • Apr 9, 2017 3:19am Apr 9, 2017 3:19am
I will explain mix modes in DashPIN.

Weighted is the standard mode. It's a weight median of all pins using priority value in every one. Trigger range controls what mix values are valid as signal.

Required works as weighted in the mix but force that pin needs have valid signal ( inside trigger range) for validate the weighted mix of all pins. A example:

Triggers: 50/100 ( you need only one pin with valid signal)
Pin 1: priority 1
Pin 2: priority 1 ( required)

Pin 1: 100
Pin 2: 0
Mix: 50 ( no signal because pin 2 don't have it)

Pin 1: 0
Pin 2: 100
Mix: 50 ( have valid signal because pin 2 have it and it's required)
Try don't lose pants never...
  • #6,532
  • Apr 9, 2017 4:11am Apr 9, 2017 4:11am
Priority mode create a group of pins overrides signals with lower priorities. Works as weighted while don't have valid signal. When this happens pins mix of that priority weight will be the signal ignoring mix or signals of lower priorities. This mode is useful for have different rules working together. A example

Trigger 50/100
Pin 1: priority 1
Pin 2: priority 2 ( priority mode)
Pin 3: priority 2 ( priority mode)
Pin 4: priority 3 ( priority mode)

Pin 1: 100
Pin 2: 0
Pin 3: 0
Pin 4: 100
Mix: 100 ( pin 4 value because have the highest priority)

Pin 1: 100
Pin 2: 0
Pin 3: 100
Pin 4: 0
Mix: 50 ( pin 2/pin 3 mix value because have the highest priority with valid signal )

The simplest way for use this mode is when you use some different exits. For example if you have 3 MAs for exit ( 50/20/10) and you want first exit happens in one but always using the faster MA available. This creates exit levels trying cover different market behaviors without modify the global exit ( 3 MAs mix for have valid signal ). In normal behavior you will have an exit with 3 MAs mix inside trigger range but in a spike you will have exit for highest priority ( MA 10) without affects main rule. It's an adaptative rule or asynchronous signal
Try don't lose pants never...
  • #6,533
  • Apr 9, 2017 12:21pm Apr 9, 2017 12:21pm
New MAs can create mix chain. For example capture shows a mix of 3 SMA ( 14 + 7 + 16 )

Blue SMA 14. Black mix of 3 SMA
Attached Image (click to enlarge)
Click to Enlarge Name: Captura de pantalla (6).png Size: 63 KB

Blue SMA 14. Black mix of 2 SMA ( 14 + 42 )
Attached Image (click to enlarge)
Click to Enlarge Name: Captura de pantalla (7).png Size: 64 KB
Try don't lose pants never...
  • #6,534
  • Apr 9, 2017 2:21pm Apr 9, 2017 2:21pm
Quoting braintheboss
New MAs can create mix chain. For example capture shows a mix of 3 SMA ( 14 + 7 + 16 ) Blue SMA 14. Black mix of 3 SMA {image} Blue SMA 14. Black mix of 2 SMA ( 14 + 42 ) {image}
Hi i dont get it where is this new Ma ? Inside Css not seen, first page not seen, last pages also not seen -
Yet to be released maybe ?
The arriving better than the arrival, the journey has just started
  • #6,535
  • Apr 9, 2017 2:23pm Apr 9, 2017 2:23pm
Quoting jenbols
{quote} Hi i dont get it where is this new Ma ? Inside Css not seen, first page not seen, last pages also not seen - Yet to be released maybe ?
Not released yet. I'm still working. But I'm showing new features. Trend, CSS and Strength uses MAs, then this kind of stuff will be available soon for them

PS: You think can create your own MAs. Mix a Jurik, Zerolag and Tema for example. Can choose between 40 MAs and mix until 4 at same time
Try don't lose pants never...
  • #6,536
  • Apr 9, 2017 2:33pm Apr 9, 2017 2:33pm
Only using SMA ( very simple average ) you can get new MA properties. Using different MAs in mix you will get the best of every one having better filtering. Really its very advanced stuff my native MAs
Attached Image (click to enlarge)
Click to Enlarge Name: Captura de pantalla (5).png Size: 301 KB
Try don't lose pants never...
  • #6,537
  • Apr 9, 2017 2:34pm Apr 9, 2017 2:34pm
Quoting braintheboss
{quote} Not released yet. I'm still working. But I'm showing new features. Trend, CSS and Strength uses MAs, then this kind of stuff will be available soon for them PS: You think can create your own MAs. Mix a Jurik, Zerolag and Tema for example...
Thank you i thought so ...
Now i start to know better the Css and aware that it uses Ma / I have been spending last 3 hours checking all Kind of Mas on CSS
When changing an MA need to change all values again of Entry/Exit threshold and adjust to new situation
also the Dss that smoothes the signal, some times not suitable for all Ma's
i changed on other Ma also the Non weighted option _
Prop length, bars to look back... is it wise to look at least at 10 bars ? as that will give us a better vision of the trend
I have a question about the TF and how to recognize which Tf is which... Or maybe i should post a photo ..

I don't understand why some times there is a buy Signal and then there are 3 Blu X or 3 red X _
They must be from other time frames .... When I hover mouse over X it says a number (Css1....68048--000)
but dont say which X is for _ Objects have been deleted and CSS Reloaded ... tried already
Maybe not necessary to know ?
The arriving better than the arrival, the journey has just started
  • #6,538
  • Apr 9, 2017 2:37pm Apr 9, 2017 2:37pm
Quoting jenbols
{quote} Thank you i thought so ... Now i start to know better the Css and aware that it uses Ma / I have been spending last 3 hours checking all Kind of Mas on CSS When changing an MA need to change all values again of Entry/Exit threshold and adjust to new situation also the Dss that smoothes the signal, some times not suitable for all Ma's i changed on other Ma also the Non weighted option _ Prop length, bars to look back... is it wise to look at least at 10 bars ? as that will give us a better vision of the trend I have a question about the TF...
Better capture... About MAs its normal changes threshold needs. In a future CSS will have an automatic setup of thresholds taking the optimal for that MA/pair

Quoting jenbols
{quote} Thank you i thought so ... Now i start to know better the Css and aware that it uses Ma / I have been spending last 3 hours checking all Kind of Mas on CSS When changing an MA need to change all values again of Entry/Exit threshold and adjust to new situation also the Dss that smoothes the signal, some times not suitable for all Ma's i changed on other Ma also the Non weighted option _ Prop length, bars to look back... is it wise to look at least at 10 bars ? as that will give us a better vision of the trend I have a question about the TF...
You cant have more one X after an arrow. Are you sure are not old objects?. You think CSS is alpha build and can have small issues like not clean all objects. About object number every instance have an unique ID. Its only for internal use
Try don't lose pants never...
  • #6,539
  • Apr 9, 2017 2:40pm Apr 9, 2017 2:40pm
Quoting braintheboss
{quote} Better capture... About MAs its normal changes threshold needs. In a future CSS will have an automatic setup of thresholds taking the optimal for that MA/pair {quote} You cant have more one X after an arrow. Are you sure are not old objects. You think CSS is alpha build and can have small issues like not clean all objects
Yes , the visual signal is very Precise .... nice to see when the levels dotted are broken by the opposite currency to Exit and
when the levels Lines are crossed to Open a trade..

Quoting jenbols
{quote} Yes , the visual signal is very Precise .... nice to see when the levels dotted are broken by the opposite currency to Exit and when the levels Lines are crossed to Open a trade..

Okay Will clean again Objects ... but never mind ,,, as now i feel more confident when i play with it ...
I have set up 6 Css with 4 different Mas just to see how it will go for this week_
And then on Main Platform (Demo) i have the Dash Pin with other Mix Snr/Averages/Strenght
SnR not sure if for me, but Averages and Strenght cool tools
The arriving better than the arrival, the journey has just started
  • #6,540
  • Apr 9, 2017 2:45pm Apr 9, 2017 2:45pm
Ok. I know why you have problems with X objects. Looks current CSS ( not new MAs ) dont works fine with same chart TF than CSS TF. I confused when i said you can set same chart TF because in next build I fixed it. But current build fails
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Captura de pantalla (8).png Size: 204 KB
Click to Enlarge Name: Captura de pantalla (9).png Size: 214 KB
Try don't lose pants never...
1 trader viewing now