Dashboard TZ

Quoting braintheboss

Disliked

{quote} You are right {quote} You can use channels 7 to 10 too.........................

Ignored

Quoting jenbols

Disliked

{quote} Thank you very much for post Post 6,474 This is really important things to understand about your baby the DashPin We will get there slowly thanks you for patience_ --=-=-=-=--=-=-=-=-=--=-=-= Signals from Pin out set Dashpin (pin 3) where do they go if Pin 3 is already in use on Eax ? I thought they go to Eax next (not-used) free Pin which was pin nr 4 and i saw it, but when I reset the Pins to start again i didn't see it anymore_ I know i dont have to use Multi-set...

Ignored

Quoting braintheboss

Disliked

{quote} Pin out group have channel like other groups. Now you are using pin 3. Looks you are using that pin number in other group. Check you are using different pin numbers (channels) in every group

Ignored

Quoting jenbols

Disliked

{quote} Hi I tried to use today Zone and Strength because i wanted to check out the Priorities how they work Was nice to see that if i set Pin-Group 1 ZONE to Priority 1 Strength to Priority 2 then the value of Zone will have more importance than the value of Strength and will be taken as trigger ...and it was 100% In Another Example on Pin-Group 2 (with other different pin tools) -Different Priority- #1 Pin 1 Priority 2 #2 Pin 2 Priority 1 (66%) then -Same Priority- #1 Pin 1 Priority 1 #2 Pin 2 Priority 1 (50%) Both Channel Trigger Min/Max (50/100)...

Ignored

Quoting braintheboss

Disliked

{quote} Yes. Priority value is the weight of that signal. Higher value more weight. And you didnt play with modes yet . Priority Mode have a curious behaviour when you use different priorities values. I called "up one step and discard the low" PS: About updates I'm slow. Now I'm working in CSS. I dont know when I will have rest of my tools ready. Really I have more but not shared yet

Ignored

Quoting jenbols

Disliked

{quote} Yes, yes pls be slow with updates ..... I am overloaded now ... slowly but surely _ Will re-check again what you said about Pin out group ... DashPin is a bit more complex than other Dashboards and still i feel it is simple once you learn it well_ Monday as usual bad for Pins and Css not so bad, but still not as expected_ Wish there was a Pin Called: Monday_Smasher or / Monday_Pip_Snatcher

Ignored

Quoting jenbols

Disliked

{quote} Hi I tried to use today Zone and Strength because i wanted to check out the Priorities how they work Was nice to see that if i set Pin-Group 1 ZONE to Priority 1 Strength to Priority 2 then the value of Zone will have more importance than the value of Strength and will be taken as trigger ...and it was 100% In Another Example on Pin-Group 2 (with other different pin tools) -Different Priority- #1 Pin 1 Priority 2 #2 Pin 2 Priority 1 (66%) then -Same Priority- #1 Pin 1 Priority 1 #2 Pin 2 Priority 1 (50%) Both Channel Trigger Min/Max (50/100)...

Ignored

Quoting braintheboss

Disliked

{quote} I forgot tell you that percents values in every pair are managed for trigger min/max. Values inside trigger range will have signal. In second capture if you set 100/100 in triggers you will not see any signal ( because values in pins are 66% )

Ignored

Quoting jenbols

Disliked

{quote} Thank you yes, that is why i set up at 50/100 still to try many many things ,,,,

Ignored

Quoting braintheboss

Disliked

{quote} I forgot tell you that percents values in every pair are managed for trigger min/max. Values inside trigger range will have signal. In second capture if you set 100/100 in triggers you will not see any signal ( because values in pins are 66% )

Ignored

Quoting jenbols

Disliked

{quote} Plz Got a Doubt If I have 3 pins in one group with Group Triggers 100/100. Pins priorities is 1 ( all pins have same importance) #1: 100 ( buy) ________Priority 1 #2: 100 (buy) _________Priority 1 #3: 100 (No Signal)____Priority 1 Then in the mixed it will be calculated as a Buy right ? -=-=---=-=-=-=-=-=-=-=-=-=-=- If I have 3 pins in one group with Group Triggers 100/100. Pins priorities is 1/1/2 ( Pins different Priority level ) #1: 100 (no signal)___Priority 1 #2: 100 (Sell)________Priority 1 #3: 100 (Buy)________Priority 2 Then in the...

Ignored

Quoting braintheboss

Disliked

{quote} No signal value in one individual pin is 0, nor 100. In both cases no signal. When you have 100/100 you need all the pins have same signal. If you want buy you will need all the pins with 100 ( buy). If you want sell all the pins 100 (sell). In first case you will get 66%. In second case 25% ( buy)

Ignored

Quoting jenbols

Disliked

{quote} Okay got you Brain, Cheers Results with both DashPins and Css, continue to do well this week no other Pins tested so got more time to be on Tz_ Unusual question.. but have you ever thought to include Gold Xau-Usd too? Wonder why in no Dashboard developer never put the gold? maybe it needs the option to import from csv file, and it will need to provide historic data in csv format...

Ignored

Quoting braintheboss

Disliked

Top running some candles. Botton refreshed. Same histogram {image}

Ignored

Quoting jenbols

Disliked

{quote} You know Brain have tried 15/H1 Tf and so on ... it is okayish, but something is wrong ... and with Higher Tfs feels better now ... when the trade comes, okay welcome, we set forget wait ... Smaller Tfs give the excitement that the trade is taken but some times small waves are not the same so I am experimenting with Prop lenght / prop trigger, range and the bar to look back Delta Threshold still changing it to well understand how behavior can change _ but hard to see the difference on chart_ Thanx for your work

Ignored

Quoting braintheboss

Disliked

{quote} I dont understand well... This means server shows signal but single in chart dont show it? If this is you are talking then its MTF side effect. This is solved in next build with native MAs ( last captures i uploaded today )

Ignored

Quoting jenbols

Disliked

{quote} Okay sorry maybe i dont write well before Small (15-H1) Tf many trades and not so good_ Higher Tf (h1/h4/w1) not many trades, but better I think it is because is MTF yes thanx

Ignored