CCI EA

Anyone know of a CCI EA that opens a short when cci drops down to -100
Also a buy when it goes up to 100

Set sl and tp...maybe B/E ....I do need an alarm when it opens the order. Anyone know of this basic EA? Anything close. I found something that does the opposite but can't use.

Here CCI signal + ATR for signal filtering

For each period and pairs you need different ATR values to filtering

For EURUSD:
M1 - 0.00011
M5 - 0.0002

if this is what you need i will add alerts for you.

Back testing on EURUSD 06/16 - 03/17 on M5 see screenshort

Something is not working right in forex.com.....it won't run and give results in the strategy tester...shows a lot of errors. Thanks for the thought.

Show errors log.

This is from the stratagy tester.

2017.03.09 09:24:14.462 USDJPYpro,M5: 6011680 tick events (26297 bars, 6012680 bar states) processed in 0:00:13.697 (total time 0:00:21.045)
2017.03.09 09:24:00.773 2016.11.01 00:00:00 cci_ea inputs: TakeProfit=250; StopLoss=150; isUseFilters=1;
2017.03.09 09:23:58.899 TestGenerator: unmatched data error (volume limit 197 at 2017.02.07 23:25 exceeded)
2017.03.09 09:23:58.899 TestGenerator: unmatched data error (volume limit 97 at 2017.02.07 22:35 exceeded)
2017.03.09 09:23:58.899 TestGenerator: unmatched data error (volume limit 97 at 2017.02.07 22:35 exceeded)
2017.03.09 09:23:58.898 TestGenerator: unmatched data error (volume limit 183 at 2017.02.07 20:40 exceeded)
2017.03.09 09:23:58.862 TestGenerator: unmatched data error (volume limit 433 at 2017.02.06 00:50 exceeded)
2017.03.09 09:23:55.569 TestGenerator: current spread 14 used
2017.03.09 09:23:53.399 Tester: Check start, test and stop of optimized parameter 'StopLoss'
2017.03.09 09:23:53.399 Tester: Check start, test and stop of optimized parameter 'TakeProfit'
2017.03.09 09:23:53.374 Expert cci_ea USDJPYpro,M5: loaded successfully

1. you have broken quotes. go to Tools -> History center -> download your symbol what you tested

For USDJPY you need other filters values i calculated them only for EURUSD. I will do it later if you need. first try to download quotes

2. change parameter isUseFilters = false (strategy will lose but should work)

Ah...okay....

I ran it with the filters on E/U.....that's an interesting EA......came within 100.00 of winning for a month.

I'm using a red 40 ssrc, blue 14 ssrc, and a green 1 ssrc to determine a set up.....than the 23 cci at 100/-100 for entry.
Here's how I'm using it......here's the png...I can give you more if you're interested...there's a couple other little things and the indicators......the entry is when the 23 cci hits 90 or 100 area....either will work.
I'm basically taking the first retrace than resume...than enter... after a major trend change on H1.....H4 ssrc 40 must agree with H1 ssrc 40.

So if I turn off the filters than all I get is an EA that opens an order at 100 or -100? Correct?

So here's what it needs for a basic EA if it just opens an order at 100/-100 with filters turned of. Nothing else on EA except cci 23...no MA's or such
1. change to 23 cci
2. Add alarm that rings until manually turned off
3. runs on all pairs

Bingo! simple and usable! If you look at my png....I will manually turn on your EA when I get the 1 ssrc "X" (green line) and cci gets to about midline heading in same direction as red 40 ssrc line.


It would be nice if it has this stuff but.....
Change the cci to a 23 or add an option to change the cci value in the open window? Add a B/E option that I can set to move sl at set amount of pips? Set the max slippage to about 5...and alarm that keeps ringing until it defeated manually.

Thanks!

be careful i am not testing it correctly
I was made it for 2 minutes for you like an example of cci strategy

Yes. If filters is off, new order will open each time when cci cross 100 and -100

Great! thanks.....I'm going to test it the next "set up" I see....

Hi Cugir321,
Looks interesting, can you post indicators and template please.
Thanks
Dave

The red 40 ssrc is a repaint indicator....it doesn't repaint often on the high 40 setting..the occasional repainting is not a big deal...if you know anything about Elliot waves you'll see it coming...long leg 1.....leg 2 retrace ....leg 3. If you have a slow computer it will slow you down......the 40 ssrc must do a ton of calculations.

I use the 10 day SDC.....it needs to point in the same direction on H4 and H1,,,,
The red ssrc 40 has to match on H1 and H4 also. This is very important....both tf's need to be moving in the same direction.

The cci EA Alexsandr did doesn't seem to open. Oh well....it would be nice to have an ea that opens an order at 100 line of cci than ring an alarm until you look at it.

I didn't post this on the trading forum because I don't want to spend a lot of time answering questions.....hopefully you can figure it out. It's not hard.
On H1 red 40 ssrc falls, blue 14 ssrc retraces, green 1 ssrc rings alarm with "X" and falls....cci 23 goes to -100....ssrc 40 matches H1 and H4....SDC matches direction both TF's...open order...
After that it gets more risky.....wait for 40 ssrc to change again. The safest move is leg 3. First big leg down, leg 2 retrace, (place order) leg 3 back down.

Alexandr....the EA's not working....tried on E/U.....it doesn't open an order. I tried it on the 5min TF.

Here's a pretty set up. H1 and H4 png's.

Everything is marked from the H1 TF.....than go over to H4 TF.....SDC matches direction.....red H4 40 ssrc matches H1...both are up
This was a beautiful setup.....the H4 actually went off about the same time as the H1....both hit cci 23 at 100 around same time

You can see why I want an CCI 23 EA that opens an order at 100/-100 and rings an alarm until I turn it off. (Even though I trust the setup I still want to look at the order when it opens.)

logs please. I can't see from here, whats going in your terminal

It may be you had the cci set to 50....at least it looks like that in the code....I changed it to 23 which is what I needed. I didn't realize you didn't have it set to 23 cci. I'm not a programmer.

I just changed it from 1 to .01 ................int Lots = .01;
I'm getting an error....truncation of constant value


I don't know what's going on.....it's not going to work if it's not set to 23 cci and .01 units (it may work but not for the set up).....anyway you can change the EA so that's done? I may have made a mistake on the units.....I'm not a programmer. Can anyone else make those simple changes and make sure it compiles properly? Change cci EA to 23 and units to .01. I'm guessing it should only take a minute to do.

Change to And you can change it in expert parameters. It was my mistake for testing i using lot = 1

Tell you once again do not trader with this EA it is not a tested (this only for demonstration)

Logs located
For tester - {workingdir}\tester\logs
For terminal - {workingdir}\MQL4\Logs

I'll correct the units than well see about the logs.....thanks

I replaced the internal unit with extern double Lots = 0.01;

Expert parameters....you got me on that one......I'll try it with just this.

It did compile without errors. I'll test it now.

OKAY I JUST PUT IT ON THE CHART AND IT OPENED IMMEDIATELY. The 23 cci was at about -80....not -100.
I put it on E/J....I'm trying it again.....I'm wondering if it shot down to -100 quick and I didn't see it....we'll see.

Here's the log
0 02:42:28.016 '641803': previous successful authorization performed from 174.131.72.25
0 02:42:28.603 '641803': ping to current access point New York 11 is 45.25 ms
2 02:47:03.139 Expert cci_ea EURJPYpro,M5: loaded successfully
0 02:47:18.280 '641803': order sell market 0.01 EURJPYpro sl: 122.507 tp: 122.107
0 02:47:18.383 '641803': order was opened : #24939513 sell 0.01 EURJPYpro at 122.357 sl: 122.507 tp: 122.107

Here's the second trade it opened.

This time it went up to the 100 line.
It looks like it opened the buy when it fell below the 100 line......the opposite of what it needs to do.....it should open as it goes up over the 100 line....it did get the right direction.

Here's the log....the buy is just the last two lines.
0 02:57:48.854 '641803': close order #24939513 sell 0.01 EURJPYpro at 122.357 sl: 122.507 tp: 122.107 at price 0.000
0 02:57:49.133 '641803': order #24939513 sell 0.01 EURJPYpro at 122.357 sl: 122.507 tp: 122.107 closed at price 122.412
0 02:57:51.230 Automated trading disabled
0 02:58:03.558 Automated trading enabled
2 02:59:33.476 Expert cci_ea EURJPYpro,M5: removed
2 02:59:58.670 Expert cci_ea EURJPYpro,M5: loaded successfully
0 03:01:06.360 Automated trading disabled
0 03:01:08.903 Automated trading enabled
0 03:03:08.076 Automated trading disabled
0 03:03:09.088 Automated trading enabled
0 03:04:00.520 Automated trading disabled
2 03:04:57.496 Expert cci_ea EURJPYpro,M15: removed
2 03:05:03.684 Expert cci_ea EURJPYpro,M15: loaded successfully
0 03:05:36.317 Automated trading enabled
0 03:05:52.096 Automated trading disabled
0 03:05:54.369 Automated trading enabled
0 03:05:56.144 Automated trading disabled
0 03:07:04.501 Automated trading enabled
0 03:07:06.285 Automated trading disabled
0 03:07:06.861 Automated trading enabled
0 03:08:01.967 Automated trading disabled
0 03:09:24.284 Automated trading enabled
0 03:09:56.651 '641803': order buy market 0.01 EURJPYpro sl: 120.928 tp: 124.928
0 03:09:56.805 '641803': order was opened : #24939799 buy 0.01 EURJPYpro at 122.428 sl: 120.928 tp: 124.928
0 03:11:18.243 Automated trading disabled
0 03:11:19.781 '641803': close order #24939799 buy 0.01 EURJPYpro at 122.428 sl: 120.928 tp: 124.928 at price 0.000
0 03:11:19.944 '641803': order #24939799 buy 0.01 EURJPYpro at 122.428 sl: 120.928 tp: 124.928 closed at price 122.429

It doesn't look like it's opening immediately....it needs to open as soon as it hits 100 or -100. Is it waiting for a new candle? If it is that needs to be changed.

I tried U/J on the H1 TF....it won't open it and it crossed back and forth over 100 a few times.

I just got it to open on the M5....but it's not opening right.....it needs to open when it comes from below the 100 line and crosses up over it for a long.

This is how the system evolved.

It's based on a major trend change (swing of red 40 ssrc...the big thick red line in first window down) then trading the first retrace and resume. another way to say it is...a major Trend change than leg 1, leg 2 , trade leg 3.....this is the highest percentage trade. (Monitoring the H1 Tf you get 1 or 2 trades per week)

I put together the ssrc thing from watching the TDI (settings 13,23,1,3)......you can see the 1,2,3 legs in the Red crosses yellow. The thing I don't like is the TDI is too noisy. That's why I got rid of it.
The red 40 ssrc is either long or short.....period. Very digital.

The yellow verticles show the beginning of leg 3 trades......the cci crosses 100 or -100 at those points after the leg 1 and leg 2....
I repeat this because it's important.....the H4 red ssrc 40 must agree with the H1 red ssrc 40....the H1 Tf is a 1/4 Tf of H4.....it insures there is plenty of movement in the trade direction when you enter on H1. If it bugs you that the 40 ssrc repaints than use the non repaint indicator....you'll just have a little more noise...not much...I would compare the two...you'll see what it's doing in relationship to the 1,2,3...the 40 ssrc is the only ssrc that's a repainter.

I really need a very basic CCI 23 EA that opens on the cross of 100 line, going up, for a long
and -100 for a short. It should open as soon as it hits the cci 100 line...nothing special like after the close of the candle.. opens when it hits the 100 line going up...trade is a long! Than "will not" open any more trades until the EA is deleted and reloaded. ... Also sets a SL and TP...also needs to be able to choose unit size.... It needs to ring an alarm when the trade is opened and not stop ringing until I defeat the alarm. I'm sure you can see why.

Here's a potential trade coming....we'll see if it plays out. Watch when H4 CCI 23 hits the 100 line.....than look at H1 and M15...(they're 1/4 TF's of each other)....you'll see what the lower TF's did to get H4 to the long trade. (if it plays out)

If you have a platform that can look at H16 it is best....the H16 ssrc 40 should start rising (H4 is 1/4 Tf of H16)....
Just to confuse you....you could take the trade on the M15 that agrees with the H1 (when 40 ssrc on H1 rises and retraces) but not as much movement. I don't like using M15

H1 TF has to rise before anything will play out on H4....H1 Red SSRC 40 must go to top. The first retrace resume after the 40 ssrc changes sides is best....period! Anything else is more risky!

If you look at H1 Tf....there was a short trade set up at 3/14 6:00 (11 candles before yellow verticle on H1).....where the cci 23 fell below -100...just before yellow verticle. Red 40 ssrc fell, blue 14 ssrc retraced up, green 1 ssrc printed pink "X" ...cci 23 fell below -100 for short.
The problem is the H4 red 40 ssrc is up.....that means H1 is retracing to H4's big trend. I didn't take it.

Everything happens at cci 23 crossing 100/-100...that's why I need a simple CCI 23 EA.

I found an EA that seems to work....thanks!