Moving average ea gbpusd 5min

Try out this EA put each on a 5min GBPUSD Chart.
I would have loved tp put them all as one EA but donot know how to code that.
enjoy

below is the last copy of the EA. my little contribution to the forex world

basics of trading concept it tries to capture bounces off the moving averages. Also prices falling through a moving average.
The main moving average is from 1 hour chart the 100 MA this is converted to 5 min.WHich is 100MA x 2 =200ma(30min)
x2=400m(15min)x3=1200(5min).In the code you will see it as 577.
Starts as this EA sees a setup and then sends a buy. (BNH EA) if the trade is faltering a sell a hedge will be sent (SH).
The reverse is true for a sell setup. That explains the four EAs attached BH/BNH SH/SHN.
The last two EAs try to capture price falling through 120MA(1HR) *x2(30Min)x2(15min)x3(5min)=1440ma.
check out the signal i have put on demo
https://www.mql5.com/en/signals/192372
to see the results

Unfortunately the trailing stop on the EA is not working . Need coder help for that. What i have do to do use a trade manager fromstevehopwoodforex called aPTM (allpair trade manager) BE 3 profit BE activate at 23 pips Jump StopLoss mjump15pips activate at 28 pips

when you started to using these ea,s are u using it on live ?

Have not yet gone live. Have seen from back test and demo it is safe and low profitability. It has good signals trying to make the most profit from the trade is an issue. Hopefully it can get an audience that turn it into a pip machine with low risk

dear sir


share it your set files


thank you

advance

I have had to refine my work. I just realised i can adjust to one minute chart. Also i had to filter more bad trades.
Here is the concept. 1 hour chart 1.6ma 5ma 20ma 80ma 100ma 240ma. 1.6ma is 100maon 1min chart 5ma is 20maon15min chart
20mais1hr ma 80ma is 20ma on 4hr chart. 240ma is the swing pendulum. these ma are centre line for B Bands 100ma 1min is 20ma 5min
if price above means buyers want to take up. 20 ma 1 hr price above means buyers taking price up and 80ma is 20 ma on4 hr so if price above
buyers are in control. these are like point of the arrow to guide buyers and sellers. when 5 and 20 are below 80 and 80 is above 100ma then sellers want to take price down.open pending sell orders. wow ti give away my one years work. I believe i have reached the end of strategy testing and looking for setups.now i will forward test for a month and then after analysis will go live

the above post files were tested on GBP USD.the below files are being tested on NU,UJ,EG,Usdchf,USDCAD,GJ,GU.,AU.
I have no set file.load mptm as default i set it to capture profit as i saw it in testing.onemore upload

all files loaded today should be placed on one minute charts. Note you need to go to download history and download one minute data. Otherwise ifyou donot have enough data the first weeks of your trading will be terrible

they say two heads is better than one, so let me give exact details of the strategy.
on the one hour chart i have
2MA
5MA
20MA
80MA
100MA
240MA
have you read about bollinger bands,they say price always reverts to the mean.
when open price is above the middle band its uptrend, price below middle band is down trend is vice versa.
if we have 20 deviation 2 bollinger band the middle band is actually or equivalent 20MA without the outer
bands.so when they say price reverts to the mean i take it that price reverts to that MA.
so if we take the 20MA on the 5min chart the 20ma is the middle band of the 20/2 bollinger band.now to
convert that to the equivalent on the 1 hr we calculate. 20/3=6.6 (15min chrt) 6.6/2=3.4(30min chrt)
3.4/2= 1.7(1hr chart) which i round upto 2MA.
so when i look at open price and it isabove 2MA iknow that price trending up on 5 min chart.
using the same calculation
5MAon 1HR is 20MA on 15min chart.
20MA is just 20MA
80MA is 20MA on 4HR chart
100MA and 240MA are explained below
then greg michlowski from forex live says 100MA and 200MA act as support and resistance.
taking these two concepts i come up with this.
if 5MA is above 20MA and 20MA is above 80MA and 80MA is above 100MA and 100MA is above 240MA.
5MA>20MA>80MA>100MA>240MA
this indicates buyers are in control. if given this scenario, open price finds itself below 80MA
this is an indicator to sellers to step in. it is a trigger event saying place sell stop orders just below
the 100MA. whats the risk? it is that open price can activate your pending order and then open prce goes back to
the 80MA which would indicate to buyers to get back in the market and would knock your stop.
the reward is that sellers can take the open price 100MA down to the 240MA.
so there we have it.
the same applies when we reverse the MA's
240MA > 100MA > 80MA > 20MA > 5MA
if open price moves 5MA to 80MA place a buystop above 100MA.place stoploss below 80MA TakeProfit above 240MA.
your comments on how to polish up this are kindly requested. this could be swing trading

www.mql5.com/en/signals/203310 and www.mql5.com/en/signals/203319 wow impressive results the EA's managed to capture brexit volatility nicely

i will be going live this week. lets do it. interesting GBP swings othe50MA others on the 38MA

I am now interested in gid trading. This week
Hope you interested I finished modifying robot to my specs now I am testing to see what settings are the best to work with i identified 14 possible variations I have have made them available for everyone to see i I will send link testing started this morning I will test for the week on Saturday I will check to see which setting has highest profit give me your two cents on the matter

https://www.mql5.com/en/users/candyman752/news

Next week will then take the best indicator setting from the above and then demo it for a week with different take profit stop-loss and grid restocking settings and hopefully in two weeks time we can see if going live is possible 

Saw the testing is going well. 

MASTER CANDLE FIB EA
First here is code to capture the sequence
double c4highest = iHigh (Symbol(),TF,iHighest(Symbol(), TF, MODE_HIGH, 4, 1));
double c4lowest = iLow (Symbol(),TF,iLowest(Symbol(), TF, MODE_LOW, 4, 1));
double c5high = iHigh(Symbol(),TF,6);
double c5low = iLow(Symbol(),TF,6);

//WEEKLY BREAKOUT ASIA DIAMOND iii
if (ImmediateMarketOrders)
if (MarketBuysCount >= 0)
if(c5high-c5low >= NormalizeDouble(5/factor,Digits))//MC candle length more than 5pips
if(c5high-c5low <= NormalizeDouble(10/factor,Digits))//MC candle length is less than 10 pips
if(c4highest <= c5high)if(c4lowest >= c5low)
BuySignal = true;//send a sellstop 5 pips below MA5

for my simple "Mother Candle Fibonacci System" an EA, 000 code it?


Changeable options/settings EA must offer

Indicator settings
Magic No.
Timer (trading time, true/false): from (hour/minute) to (hour/minute)
Time frame
SL/BE/trailing stop & step/TP as pips)
Hide SL/trailing/TP: true/false

How it has to run (All pairs, TF=M5/M15)

Once EA recognized a mother candle (MC) or anyway else
extensions of this MC.
If the the length of the MC is min 5 pip and max 10 pip, EA must place 3 buy and 3 sell pending orders at Fibo extension 127%
SL: 62% to 100%
BE and closing of 1 postion: 200%
Trailing: from 210% or 200%+ 1 pip, step: 1-2 pip
TP: 262% (1 position) and 462% (last position)
After openning orders of one side (buy or sell), pending orders must not be deleted until another MC appears OR price reaches 262% level.
OCO option (true/false)
If another MC appears before any pending order gets filled, the EA must delete all orders and place new ones based on Fibo levels of the new MC.
Thank you very much for your notice. at last I know why nobody has not respond my request yet.


MC is a candle with 2-4 kids (candles), i.e. highest high of them is not higher as the high of their mother and lowest low is not lower or a candle is a mother if she surrounds her 2-4 kids.

place HGBnDMC core library in in the invlude file
place the othe files in the experts file

I have just included input for saying the minimum length of the Master Candle and another input for the maximum length of the Master Candle.
That way you can use higher time frames unlike the above that is limited to 5min and 15min as the maximum height is 10 pips.