Dashboard TZ | Page 120 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard TZ
Exit Attachments

Dashboard TZ

  • #2,381
  • Apr 5, 2016 3:36am Apr 5, 2016 3:36am
Quoting SpencerBizze
{quote} ww, Is yours still looking good, new basket is not looking too good my side but maybe it will turn around. I didn't use your cfg file, I just setup using what you suggested earlier so I think I have your setup right. Pin1 (trend) , Channel 1, Priority 1 Tf5, 15, 30, 60 (All priority 1) {image} Pin2 (Strength), Channel 2 Priority 1 Tf5, 15 (All priority 1) {image} Pin3 (Trend Exit), Channel 3, Priority 1 TF5, 15 Exits (All priority 1) {image} DashEAX Pretty much default. Just set in locks for take basket profit (7take3.5,14take7,28take14...
For replicate his results you need know indicators settings. Only in trend indicator you have 134 combinations per instance
Try don't lose pants never...
  • #2,382
  • Apr 5, 2016 3:45am Apr 5, 2016 3:45am
Quoting braintheboss
{quote} Check better plugins. Maybe you have one indicator sending signals. Maybe strength or new SnR
Brain, I have seen this too.
I think it might be a bug on the OUT Pin on the dash. I am using version 0.76.

look at below, you can see channel five being used, but it is turned off.
Attached Image (click to enlarge)
Click to Enlarge Name: Image1.png Size: 36 KB


But on the EAX it still comes through even though it is off.
Attached Image


Not really and issue.
I have just ignored it, or you can just remove the channel out of the pin and put it to 0 I would assume.
  • #2,383
  • Apr 5, 2016 3:53am Apr 5, 2016 3:53am
Quoting braintheboss
{quote} Check better plugins. Maybe you have one indicator sending signals. Maybe strength or new SnR
Thanks, but all indicators that are running are running between PIN 1-4. TZ is running on PIN 1, SnR is running on PIN 2, then I have strength small time frames on PIN 3 and larger timeframes on PIN 4. No other indicator equipped with PINs is running.​
  • #2,384
  • Apr 5, 2016 3:54am Apr 5, 2016 3:54am
Quoting SpencerBizze
{quote} Brain, I have seen this too. I think it might be a bug on the OUT Pin on the dash. I am using version 0.76. look at below, you can see channel five being used, but it is turned off. {image} But on the EAX it still comes through even though it is off. {image} Not really and issue. I have just ignored it, or you can just remove the channel out of the pin and put it to 0 I would assume.
If is set the channel there will still send signals i think to the pins,but while eax pins are disabled no problem as will not take the signal,only will show.
clear global variables also reste eax .might help.
Attached Images
Take what you can, give nothing back
  • #2,385
  • Apr 5, 2016 3:54am Apr 5, 2016 3:54am
Quoting SpencerBizze
{quote} Brain, I have seen this too. I think it might be a bug on the OUT Pin on the dash. I am using version 0.76. look at below, you can see channel five being used, but it is turned off. {image} But on the EAX it still comes through even though it is off. {image} Not really and issue. I have just ignored it, or you can just remove the channel out of the pin and put it to 0 I would assume.
Tried removing the channel out of the PIN and put it to 0 no change.​
  • #2,386
  • Apr 5, 2016 3:58am Apr 5, 2016 3:58am
try use this EAX set ,is a bit cleaner and you can use it only for visual orders or manage trades with pins.change magic as you wish.and use time to time when set in dashtz different things EAX reset button.
Attached File(s)
File Type: rar EAX clean.rar   4 KB | 437 downloads
Take what you can, give nothing back
  • #2,387
  • Apr 5, 2016 4:01am Apr 5, 2016 4:01am
Quoting SpencerBizze
{quote} Brain, I have seen this too. I think it might be a bug on the OUT Pin on the dash. I am using version 0.76. look at below, you can see channel five being used, but it is turned off. {image} But on the EAX it still comes through even though it is off. {image} Not really and issue. I have just ignored it, or you can just remove the channel out of the pin and put it to 0 I would assume.
Maybe but if you put channel to 0 you will resolve it temporarily
Try don't lose pants never...
  • #2,388
  • Apr 5, 2016 4:01am Apr 5, 2016 4:01am
Quoting Husky77
{quote} If is set the channel there will still send signals i think to the pins,but while eax pins are disabled no problem as will not take the signal,only will show. clear global variables also reste eax .might help. {image} {image}
Thanks Husky77, changed the PIN channel to 5 and no more arrows showing... Your a genius. Thanks too for the set.
  • #2,389
  • Apr 5, 2016 4:03am Apr 5, 2016 4:03am
Quoting Potter413
{quote} Thanks Husky77, changed the PIN channel to 5 and no more arrows showing... Your a genius. Thanks too for the set.
if in pinout is channel 5 then that connect it with pin 5 from EAX in fact. 0 must disconect as Brain said.and everytime change this pins/channels settings better to use eax reset button,will rearange things in place. genius here is in fact Brain i only give him headaches with testings
youre welcome.
Take what you can, give nothing back
  • #2,390
  • Apr 5, 2016 4:09am Apr 5, 2016 4:09am
only snr (last version as external plugin) based entry. looks nice we will see until when...
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Screenshot_7.png Size: 47 KB
Click to Enlarge Name: Screenshot_8.png Size: 42 KB
Take what you can, give nothing back
  • #2,391
  • Apr 5, 2016 4:11am Apr 5, 2016 4:11am
[Quote = Husky77; 8853785] încercați să utilizați acest set EAX, este un pic mai curat și îl puteți utiliza numai pentru comenzi vizuale sau de a gestiona tranzacții cu magia pins.change pe măsură ce wish.and utilizați timp în timp când este stabilit în dashtz diferite lucruri EAX butonul de resetare. {Fișier} [/ quote]

thanks
  • #2,392
  • Apr 5, 2016 4:14am Apr 5, 2016 4:14am
Quoting Husky77
only snr (last version as external plugin) based entry. looks nice we will see until when... {image} {image}
In range TZ/SnR are pips killer. But is necessary strength works better with zones and we will have perfect auto trading
Try don't lose pants never...
  • #2,393
  • Apr 5, 2016 4:29am Apr 5, 2016 4:29am
entangled in the settings and indicators . Can any man will tell in detail? Thank you
Attached Image (click to enlarge)
Click to Enlarge Name: Dash.jpg Size: 301 KB
  • #2,394
  • Edited 4:50am Apr 5, 2016 4:30am | Edited 4:50am
Quoting braintheboss
{quote} In range TZ/SnR are pips killer. But is necessary strength works better with zones and we will have perfect auto trading
What weight/priority do you suggest across SnR, TZ, Strength and Trend?
I have weighted them all equal on the PIN's, but then weighted some TF's with-in those Pin's if that makes sense.

Also something I need clarity on is the PIN1, being master Pin.
Is this the Master PIN on the DashTZ or DashEAX, can't remember where I read about the master PIN.
Meaning that you need PIN1 to match your PIN OUT in order for the DashEAX to enter the trade?
Or does this not play its part, so if PIN OUT is long, the EAX will go long and if it is Short it will go short, ignores master pin just adds all pins positions?

This might help, here is one of the setup's I am testing since this morning:
PIN1 SnR (Not latest version)
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 157 KB


PIN2 (Threw in the MADDASH for good measure)
Attached Image (click to enlarge)
Click to Enlarge Name: Image1.png Size: 156 KB


PIN3 (Strength TF 30M, 1H, 4h)
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot6.png Size: 138 KB


PIN4 (Trend TF 30M, 1H, 4H)
Attached Image (click to enlarge)
Click to Enlarge Name: Image2.png Size: 156 KB


PIN5 (TZ)
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot4.png Size: 156 KB


PIN OUT (Channel 5, being used on EAX with reversal)
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot5.png Size: 148 KB


EAX Dash
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot3.png Size: 336 KB

Ignore profit today as there were some old trades which were left in from other tests from last night. They weren't working.
I started on -$44 for the day, so still a little in the red for the new setup.

Ignore this screenshot below, I got them all a little mixed up and there is one showing which I can't see in my post quite strange.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 156 KB
  • #2,395
  • Apr 5, 2016 4:35am Apr 5, 2016 4:35am
Quoting SpencerBizze
{quote} What weight/priority do you suggest across SnR, TZ, Strength and Trend? Also something I need clarity on is the PIN1, being master Pin. Is this the Master PIN on the DashTZ, can't remember where I read about the master PIN. Meaning that you need PIN1 to match your PIN OUT in order for the DashEAX to enter the trade? Or does this not play its part, so if PIN OUT is long, the EAX will go long and if it is Short it will go short?
Forget guide. It's obsolete. Now all pins have same behavior. Only pin out is different. About priorities depends of your strategy. You don't have exact rules.
Temporarily I'm not using trend because needs improve features for be effective. The problem is between zones (tz/snr) and strength. Strength is too slow for mix it with zones but it's necessary for filter early zones entries. I don't have idea in this moment how resolve this issue. I'm thinking about resolve it
Try don't lose pants never...
  • #2,396
  • Apr 5, 2016 5:55am Apr 5, 2016 5:55am
Quoting braintheboss
{quote} Forget guide. It's obsolete. Now all pins have same behavior. Only pin out is different. About priorities depends of your strategy. You don't have exact rules. Temporarily I'm not using trend because needs improve features for be effective. The problem is between zones (tz/snr) and strength. Strength is too slow for mix it with zones but it's necessary for filter early zones entries. I don't have idea in this moment how resolve this issue. I'm thinking about resolve it
Still learning and only recently fully understand how to bring all the pins in. I now see how this all works and now need to tweak and correct each day.
It is quite hard to apply a strategy with only priorities.

Would it not be possible to have an option that it only outputs to PIN OUT if for example PIN1(SNR), PIN3(Strength), match direction.
Have a Match direction number assignment, so if you populate PIN1 Match direction with a 1 and PIN3 with a 1 these PIN's priorities would only be considered in the PIN OUT if they match direction.
This way you would have endless options, if you can do this with each PIN. Then you could use Strength to filter early Zone entries and later could also use trend.

This way it only reflects to PIN OUT if they are both (Match Direction Number "1") long or short?
Just a thought.

Keep up the good work!!!
Maybe there is a better way.
  • #2,397
  • Apr 5, 2016 6:02am Apr 5, 2016 6:02am
Quoting SpencerBizze
{quote} ww, Is yours still looking good, new basket is not looking too good my side but maybe it will turn around. I didn't use your cfg file, I just setup using what you suggested earlier so I think I have your setup right. Pin1 (trend) , Channel 1, Priority 1 Tf5, 15, 30, 60 (All priority 1) {image} Pin2 (Strength), Channel 2 Priority 1 Tf5, 15 (All priority 1) {image} Pin3 (Trend Exit), Channel 3, Priority 1 TF5, 15 Exits (All priority 1) {image} DashEAX Pretty much default. Just set in locks for take basket profit (7take3.5,14take7,28take14...
I don't use is preferred. Use all signals. The channel 6.7.8.9 is trend 5.15.30.60 The channel 10.11 is stength 5.15
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 1.jpg Size: 110 KB
Click to Enlarge Name: 2.png Size: 49 KB
Click to Enlarge Name: 3.jpg Size: 115 KB
  • #2,398
  • Apr 5, 2016 6:24am Apr 5, 2016 6:24am
Quoting ww9528ww
{quote} I don't use is preferred. Use all signals. The channel 6.7.8.9 is trend 5.15.30.60 The channel 10.11 is stength 5.15 {image} {image} {image}
I had the same just Tigger Max was set to 30 and for the exit I had Tf 5 and Tf 15.

What is trigger Max and have you had better results with Exit just on Tf5?
  • #2,399
  • Apr 5, 2016 6:33am Apr 5, 2016 6:33am
Quoting SpencerBizze
{quote} I had the same just Tigger Max was set to 30 and for the exit I had Tf 5 and Tf 15. What is trigger Max and have you had better results with Exit just on Tf5?
Braintheboss said use 5 minutes to exit will be better, so I use 5 tf exit. Risk will be smaller
Attached Image (click to enlarge)
Click to Enlarge Name: 4.jpg Size: 228 KB
  • #2,400
  • Edited Apr 6, 2016 5:13am Apr 5, 2016 6:34am | Edited Apr 6, 2016 5:13am
Quoting SpencerBizze
{quote} Still learning and only recently fully understand how to bring all the pins in. I now see how this all works and now need to tweak and correct each day. It is quite hard to apply a strategy with only priorities. Would it not be possible to have an option that it only outputs to PIN OUT if for example PIN1(SNR), PIN3(Strength), match direction. Have a Match direction number assignment, so if you populate PIN1 Match direction with a 1 and PIN3 with a 1 these PIN's priorities would only be considered in the PIN OUT if they match direction....
You want selective signals . I'm preparing something similar but not in that way exactly. Do you think pin out smooth pins signals. Don't have logic send only signals with same direction to pin out because then you will have always 100% of signal. And that destroy power of mix

If you want selective signals you can send it directly to EAX. Allen tools are in constant evolution and with enough time I will improve it enough. For that is good people give me feedback like you, because with more info of tests I can search better ways

About use strength/trend in your way is a thing I'm trying but theory is more easy than real. I have change many things in indicators/DashTZ for can get behavior like you say. I'm working but I don't know how will work future additions in the mix until they are implemented and tested. I'm getting much surprises with Husky reports. Some are good others are bad because things don't work as expected
Try don't lose pants never...
0 traders viewing now