Dashboard TZ | Page 58 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

MagicGirl dashboard 221 replies

Help with dashboard style indicator 2 replies

Dashboard indicators 4 replies

Dashboard Indicator Required 1 reply

Dashboard/Grid in lower indictor window 6 replies

Attachments: Dashboard TZ
Exit Attachments

Dashboard TZ

  • #1,141
  • Feb 27, 2016 4:09am Feb 27, 2016 4:09am
Quoting Husky77
{quote} i still try to understand this stuff with priorities. so how many priorities we can set if we have let's say 5 pins active? can be priority 1,2,3,4,5? and wich number is to be taken first as first priority? 1,2,3,4,5?what is the order?
You can choose 1-255 as priority. Priorities values are mixed ( its a sum ). If the sum of PINs in a direction is bigger than other then you have signal. If you put in a PIN big value comparing with rest of PINs, that PIN will have predominance against the rest.

Ex.

PIN 1: TZ 15 - Priorities( 5/4 )
PIN 2: SnR H1 - Priorities ( 2/1 )

If you have BUY signal in PIN 2, you will not have neutral signal because PIN 1 have 4 when dont have signal. That do you need TZ send BUY signal for have PIN OUT BUY. That means you only want signal if you have TZ or TZ/SnR, but if you only have SnR with signal, then you dont want send signal ( because for your strategy SnR is not enough alone for send signal )

PIN 1: TZ 15 - Priorities( 2/1 )
PIN 2: SnR H1 - Priorities ( 2/2 )

Now you will have signal if TZ/SnR or SnR show signal. If you only have signal in TZ, SnR will block it. If TZ dont send signal but SnR have one, then you will have signal because SnR have more weight than TZ ( 2 ) without signal ( 1 ).

PS: Priorities are very powerful. Give you very flexibility and let you change completely how DashTZ send signals. That do more complex get right settings but if you have good strategy and you understand how priorities works, you can simulate it without have change DashTZ code. Really is like a strattegy maker. You put the puzzle pieces and later check how works...
Try don't lose pants never...
  • #1,142
  • Feb 27, 2016 4:12am Feb 27, 2016 4:12am
Quoting Husky77
{quote} i still try to understand this stuff with priorities. so how many priorities we can set if we have let's say 5 pins active? can be priority 1,2,3,4,5? and wich number is to be taken first as first priority? 1,2,3,4,5?what is the order? or priorities are not considered if PIN IO si to 0 all? {image}
The largest number = higher priority. 4 > 2
The road to success is always under construction !
  • #1,143
  • Feb 27, 2016 4:23am Feb 27, 2016 4:23am
Quoting Husky77
{quote} i still try to understand this stuff with priorities. so how many priorities we can set if we have let's say 5 pins active? can be priority 1,2,3,4,5? and wich number is to be taken first as first priority? 1,2,3,4,5?what is the order? or priorities are not considered if PIN IO si to 0 all? {image}
For a PIN enter in a mix you need put PIN channel different to 0 ( this enabled it ). If even enabled, you set priorities to 0 then is same behaviour than have PIN disabled. Because sum 0 dont change anything
Try don't lose pants never...
  • #1,144
  • Feb 27, 2016 4:41am Feb 27, 2016 4:41am
Quoting braintheboss
{quote} For a PIN enter in a mix you need put PIN channel different to 0 ( this enabled it ). If even enabled, you set priorities to 0 then is same behaviour than have PIN disabled. Because sum 0 dont change anything
for example in this case pin 3will be prior to pin 2 with this settings?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_3.jpg Size: 214 KB
Take what you can, give nothing back
  • #1,145
  • Feb 27, 2016 4:51am Feb 27, 2016 4:51am
Quoting Husky77
{quote} for example in this case pin 3will be prior to pin 2 with this settings? {image}
Yes. You have higher priority value in PIN 3
Try don't lose pants never...
  • #1,146
  • Feb 27, 2016 4:53am Feb 27, 2016 4:53am
Quoting braintheboss
{quote} Yes. You have higher priority value in PIN 3
good.so now in this scenario what that 3 priority does as we have signals looks like in all 3 pins?
Attached Image
Take what you can, give nothing back
  • #1,147
  • Feb 27, 2016 4:59am Feb 27, 2016 4:59am
Quoting Husky77
{quote} good.so now in this scenario what that 3 priority does as we have signals looks like in all 3 pins? {image}
Snr only use H1-W1 TF. If you put lower will use H1 for default. Same with PIN 1.

PS: Next build will support all TF in SnR ( and non standards TF too )
Try don't lose pants never...
  • #1,148
  • Feb 27, 2016 5:01am Feb 27, 2016 5:01am
Quoting braintheboss
{quote} Snr only use H1-W1 TF. If you put lower will use H1 for default. Same with PIN 1. PS: Next build will support all TF in SnR ( and non standards TF too )
''Snr only use H1-W1 TF'' ohh this change the things now.how i didnt knew it /. lol
Take what you can, give nothing back
  • #1,149
  • Feb 27, 2016 5:02am Feb 27, 2016 5:02am
Quoting Husky77
{quote} ''Snr only use H1-W1 TF'' ohh this change the things now.how i didnt knew it /. lol
Dont worry. Everybody is human

[PIN 2/3/4/5]

Zone Type = type of signal ( TZ / SnR / Extern )
PIN Type = mode of signal ( Entry / Exit )
Timeframe = Timeframe ( TZ: All TF / SnR: H1 to W1 )
Period = Period length ( TZ only )
PIN Channel = PIN channel.( must greater 1 / 0: disabled )
PIN Signal Area = Fibo level ( opposite signal is mirrored to opposite level -> 23.6 and 76.4 )
PIN Priority = PIN priority
PIN Priority No Signal = PIN priority when dont signal showed
Try don't lose pants never...
  • #1,150
  • Feb 27, 2016 5:08am Feb 27, 2016 5:08am
thx for explanations guys.i was not so good in school at exact sciences as math or algebra lol
my love was literature and history
Take what you can, give nothing back
  • #1,151
  • Edited 5:28am Feb 27, 2016 5:12am | Edited 5:28am
Quoting Husky77
thx for explanations guys.i was not so good in school at exact sciences as math or algebra lol my love was literature and history
It's okay ... you have all the time to learn!
PIN IN - for input signals from other indicators or EA, that they are covered with pines (MADdash, DashTZ). If you do not use put 0.
PIN OUT - is to output the signal from DashTZ towards EAX, as a result of combining the signals I opted (recommended pin5).
The road to success is always under construction !
  • #1,152
  • Feb 27, 2016 5:13am Feb 27, 2016 5:13am
Quoting Husky77
thx for explanations guys.i was not so good in school at exact sciences as math or algebra lol my love was literature and history
I will not feel fine until you show me a profit report with 1M in ONE DAY
Try don't lose pants never...
  • #1,153
  • Feb 27, 2016 5:25am Feb 27, 2016 5:25am
i will start next week test with this one/i was thinking more about medium long run with this set,will see then .and really wait for next version with more non default timeframes,that will be very interesting
Attached File(s)
File Type: rar TZ-SNR test.rar   < 1 KB | 455 downloads
Take what you can, give nothing back
  • #1,154
  • Feb 27, 2016 5:29am Feb 27, 2016 5:29am
Quoting braintheboss
{quote} The important thing is play with priorities. That can change very much how every area is treated. Normally SnR is more consistent as S/R and you have let more weight. Priority No Signal is more important than Priority option because when you dont have signal can avoid fake entries. {quote} You dont have exact rules. Depends you need, TP/SL size and that things. Better is you try different settings and you see how works. But is more important priorities than type of zone you use. You will need time for test enough combinations for have stable...

Look at this chart, I have put the priorites on both. look at OUT prioritys. I have put the same prioritys.

If we can use the exit signal in your dash then we can use that on BUY on H4 and SELL at H1 or somthing.

This is my own rules.(We are in SELL position)
1. Close SELL and Buy when price hit H4(down) and the Close on H4 Candel is over the Resistance and Zone.
2. If the same SELL go thrue the Resistance and a H4 Close is below the Zone it is a continuation or Sell and itīs going to D1 Recistance /Zone.

It is important to know that if it is a continuation or a turnoround, use the Timeframe (M30 is a Close on M30 Chart and D1 is a Close on D1 chart)

I Think what you have begin to do with the DashTZ here is something more than a signal.


/Robert
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Image1.png Size: 36 KB
Click to Enlarge Name: Image2.png Size: 51 KB
  • #1,155
  • Edited 6:43am Feb 27, 2016 6:20am | Edited 6:43am
Quoting robertr
{quote} Look at this chart, I have put the priorites on both. look at OUT prioritys. I have put the same prioritys. If we can use the exit signal in your dash then we can use that on BUY on H4 and SELL at H1 or somthing. This is my own rules.(We are in SELL position) 1. Close SELL and Buy when price hit H4(down) and the Close on H4 Candel is over the Resistance and Zone. 2. If the same SELL go thrue the Resistance and a H4 Close is below the Zone it is a continuation or Sell and its going to D1 Recistance /Zone. It is important to know that if it...
Priorities and fibo levels try do that. Depends you have configured priorities you change fibo level behaviour and try filter fake swings. But in one moment all signals will going in same direction ( against trend ) becaus Zones are pullback nature. When this happens SL will savebthe problem. You think if DashTZ show opposite signal but price continue trend, when price pass zones the signal will convert in continuation becuause fibo levels know Support become Resistance and viceversa. Only critical moment is when a zone is broke. But in general fibos and priorities cover all.

About use signals, PIN OUT send signal of all PINs mixed. That signal is Supersignal because is a filtered signal, not raw signal like PINs alone

PS: Entry type signals are not mixed. You have put Exit. In your capture only BQ/Strength signals are mixed. For that you have same PIN OUT signals even PINs 1-4 have different map...
Try don't lose pants never...
  • #1,156
  • Feb 27, 2016 8:02am Feb 27, 2016 8:02am
Hi Brain,

from your description in p.1 "[PIN IO]

PIN In #1 = Pin In #1 channel ( must greater 5 / 0: disabled )
PIN In #1 Priority = Pin In #1 priority
PIN In #2 = Pin In #2 channel ( must greater 5 / 0: disabled )
PIN In #2 Priority = Pin In #2 priority
PIN Out = Pin Out channel ( must greater 5 / 0: disabled )
PIN Out Priority = Pin Out priority"

what's meaning of channel and must greater 5? the difference of channel and priority. Is that pin 1 =channel 1 and pin 2 = channel 2?
  • #1,157
  • Feb 27, 2016 9:13am Feb 27, 2016 9:13am
Quoting jasonckb
Hi Brain, from your description in p.1 "[PIN IO] PIN In #1 = Pin In #1 channel ( must greater 5 / 0: disabled ) PIN In #1 Priority = Pin In #1 priority PIN In #2 = Pin In #2 channel ( must greater 5 / 0: disabled ) PIN In #2 Priority = Pin In #2 priority PIN Out = Pin Out channel ( must greater 5 / 0: disabled ) PIN Out Priority = Pin Out priority" what's meaning of channel and must greater 5? the difference of channel and priority. Is that pin 1 =channel 1 and pin 2 = channel 2?
Channel is PIN number. If you set number 1-5 you wll see signal in EAX ( only support channels 1-5 ). Priority i explained in posts above.

PS: In last posts you have some settings files. If you have doubts download it and see how is configured every PIN.
Try don't lose pants never...
  • #1,158
  • Feb 27, 2016 11:44am Feb 27, 2016 11:44am
Quoting braintheboss
{quote} Priorities and fibo levels try do that. Depends you have configured priorities you change fibo level behaviour and try filter fake swings. But in one moment all signals will going in same direction ( against trend ) becaus Zones are pullback nature. When this happens SL will savebthe problem. You think if DashTZ show opposite signal but price continue trend, when price pass zones the signal will convert in continuation becuause fibo levels know Support become Resistance and viceversa. Only critical moment is when a zone is broke. But in...
Ok I do not undestand the different off an Entry and Exit Signal, Can you explain that for me please..

/Rob
  • #1,159
  • Feb 27, 2016 3:58pm Feb 27, 2016 3:58pm
SnR ( v1.30 )

+ added all standard TFs
Try don't lose pants never...
  • #1,160
  • Feb 27, 2016 7:20pm Feb 27, 2016 7:20pm
Quoting braintheboss
{quote} Channel is PIN number. If you set number 1-5 you wll see signal in EAX ( only support channels 1-5 ). Priority i explained in posts above. PS: In last posts you have some settings files. If you have doubts download it and see how is configured every PIN.
so if I wanna let pin in #1 be calculated the weighted result in pin o rather than shown in EAX, should I set its channel to zero while set a priority to it?
14 traders viewing now