Quantum London Trading

Dear genry, i am using 13-5 version, but at the expert column, it shows, QuMa_ChannelsFIBO_min EURUSD,M1: indicator is too slow, 4867ms. rewrite the indicator, please

Hi, yan7181!

Try to use a mod 13-6. Staxis amended the Advisor to remedy this situation.
Colleagues, it is necessary to regularly check the forum to find for new versions.
I am not always here to report the new in Russian forum.

I tried to run above EA and it looks for QuMA_ChannelsFIBO_min indicator. Can someone tell me where I can find it?

hi Genry, is it okay you translate for me what is this part of the input?

Ok!

Ок! And even a little more


enum Slip_Spred {
ignore,
only at the opening,
only at closing,
always };
enum enum_curtime {broker, GMT};
enum enum oc {on the current candle, on the next candle};
enum enum_cycles {at opening, closing};

input string oo2 = "1=23.6 2=38.4 3=50 4=61.8 5=78.6 6=Gann 82.87 7= 88.2 8=100%"; // Level-FIBO Filter
input int FibSelect_Open = 5; // to open
input int FibSelect_Close = 2; // to close

input string qq2 = "============================================= ======================== "; // Section indicator settings" _MACD_Xtr "to enter
input bool MACD_Xtr_on = false; // switch indicator
input int FastMA = 12; // Period of fast EMA
input int SlowMA = 26; // Period of slow EMA
input int Source = 1; // Source of volatility: 0 - volume, 1 - ATR, 2 - standard deviation
input int SourcePeriod = 5; // Period of the source of volatility
// Warning
input double BackPeriod = 444; // Smoothing period damping; mb <1
// Levels of PC / PP
input double xVolatility = 0.5;
input double Sens = 0; // Threshold in points. or ticks (for volume)

input string lll2 = "============================================= ======================== "; // Sub-block to enter indicator Envelopes
input bool Envelopes_on = false; // switch indicator
input int MA_Period = 14; // Period
input int MA_Shift = 0; // shift
input ENUM_MA_METHOD MA_Method = MODE_SMA;
input ENUM_APPLIED_PRICE Applied_Price = PRICE_CLOSE;
input double Deviation = 0.1; // The deviation in%

input bool fulltime = true; // Trade 24/5
input bool contgrid = true; // Continued meshing at the end of trading hours
input bool manual = false; // Manually Close Trades
input double mm = 0; // Money Management (multiply lots every $ x)
input string aa = "-----------"; // If Trade 24/5 = false then:
input enum_curtime CT = 1; // timing of broker or GMT
input enum_cycles cyc_var = 1; // version of the work cycle counter
input string _open1_ = "Opening the first session";
input int open1hour = 07; // clock
input int open1minut = 00; // minutes
input string _close1 _ = "Closing Time first session";
input int close1hour = 13; // Watches
input int close1minut = 00; // minutes
input int max1 = 0; // Max Trades per Trading Slot 1
input int cyc1 = 0; // Max Cycles per Trading Slot 1
input string _open2_ = "Opening the second session";
input int open2hour = 07; // clock
input int open2minut = 00; // minutes
input string _close2 _ = "Closing Time 2nd session";
input int close2hour = 13; // Watches
input int close2minut = 00; // minutes
input int max2 = 0; // Max Trades per Trading Slot 2
input int cyc2 = 0; // Max Cycles per Trading Slot 2

input bool closeend = false; // Close all trades at End Time
input int wait = 0; // Wait X boxes before opening trades
input bool onlylowerhigher = false; // Only open higher (sells) or lower (buys) than previous order
input int xdist = 0; // Minimum distance between entries
input double multi_xdist = 1; // a factor of distance between orders
input int numcycles = 0; // Number of Daily Cycles to run
input bool stop = false; // Stop after each cycle
input int tf = 1; // Time Frame (minutes)
input bool fifo = false; // Use FIFO Rule
input bool mon = true; // Trade on Monday
input bool tue = true; // Trade on Tuesday
input bool wed = true; // Trade on Wednesday
input bool thurs = true; // Trade on Thursday
input bool fri = true; // Trade on Friday
input int xcandles = 0; // Only trade every X candles
input int qde = 325; // Quantum eintDepth3 for Entry
input int qdc = 325; // Quantum eintDepth3 for Close
input enum_oc oc_close = 1; // option of closing
input bool reverse = false; // Reverse Trading (Buy on Red, Sell on Blue)
input uint MaxWaiting = 30; // maximum waiting time until the trade flow (s)
input Slip_Spred Slip_on = 1; // selection of accounting slip
input int Slip = 5; // maximum Slippage

input Slip_Spred Spred_on = 1; // selection of accounting spreads
input int Spred = 5; // maximum spread

input string _multip _ = "IF multiplier1 or multiplier2 > 0, the next lot = previous lot * multiplier1*multiplier2;
input double multip1 = 1.01; // 1st multiplier lot
input double multip2 = 1.11; // 2nd factor lot

input ENUM_TIMEFRAMES TF ART = PERIOD_D1; // Timeframe for the ATR indicator
input int ATR_Period = 14; // period of the ATR indicator
input bool CloseProfit = false; // Close only in profit
input bool GridTSon = false; // use TS grid
input double percTS_ATR = 0; // the distance from the price grid to the current prices in% of ATR
input double percTSstep_ATR = 0; // the distance from the price grid to TS (in% ATR)
input color GridTScolor = clrWhite; // Line color TS_BUY
input ENUM_LINE_STYLE TS_LINE_STYLE = 0; // Line style TS
input bool debug = false; // Debug Mode

awesome works, Genry, appreciate your help here.

Thank you very much,

hello genry,
thank you for your support and contribution.

I am trading EU 1 min manual only, and this is my protection from early entries:

* add juice levels + !de_munyuk:
* modify juice level to (21,36) - or default is also good.

- open trades only juice level is above the ------ line + quantum.
- only sell when de_munyuk is green / only buy when is orange
- close when juice is above the ----- line + quantum.

(only tested for EU 1min)

JuiceLevels is a must, prevents all early entries - modify to your own liking / risk.
_______

this is my contribution to this thread, otherwise I would have sent you a private message.
cheers,
OYE

Hello, openyoureyes!
You answer - a living impulse in the subject. I use the adviser, but also continue to trade hands. Today I will try to trade your method.
Thank you for your contribution to the cause!

I am newcomer in forex so anybody helps me have posted screenshot 1/2 that want tpl or group of indicator. but is looking in screen cycle box as like candle what is? lf it is use of any indicator that please give me the indicator or tpl

Hi All!
The ideas that I have proposed to continue to develop further:
1. Sсriptong did MTF channel indicator version.
You can specify any value for the 3 channel levels. Indicator fast and written in the new mql4.
2. There is a new version of the advisor (Staxis) + new indicators:
1. envelopes channel
2. Fibo channel
3. ATR-channel
I showed examples where these indicators are used effectively in the trade.
It is regrettable lack of feedback on the forum. 117 traders took the expert to trade, but no reviews, questions - all is quiet

Probably all have learned the Russian language and write in Russian forum.

i was testing quantum london 1.61.1 m13-6 on Euro 1 minutes (live account just usd 100). but was call margin yesterday. Using setting (EurUsd_m1_mod13-4_Ñ-еÑ-Ñ-овÑ-й.set)
it works well at first, but one big move sweep away my account. I know the amount is too small.
hope can create the EA combine with kiosotto.

Yes, yesterday and the day before was a hard day for this strategy. This EA loves flat. For relevant mod 13-6-14: more features and fewer bugs.
At the maximum settings Advisor handle the drawdown, but a deposit of $ 100 for cent accounts in increments of 0.01

Very Good THX

Hello,

Sorry for that question but where are the indicators?

Green pips

Could anybody translate the Russian from the settings in the 1.6.1 Staxis version? It works really well but I can't read what half of the parameters are saying.

Edit: I found the translation above.

Edit #2: How do you change the starting lot on the staxis version? Changing the lot size in the Trade 1-12 variable doesn't change anything in backtests.

Edit #3: Discovered that the lot sizing is kind of a decimal off. If you want it to trade .1 lots, then you have to set the first lot multiplier to 10 and the second lot multiplier to 0. Very strange.

Hi Roman,

The screenshots you posted are from my templates that I have created.

Most traders design a tpl that suits them be it the color, the style, or the informative indicators.

If you search FF you will find most of what you need.

The main informative indicators you need are as follows just to give you a helping start:

Quantum
Pip Counter
M-Candles
Any Candle
Daily Open line

Some if not most of these indicators are NOT needed to trade this method I assure you.

However, I do like my range of non-lagging informative indicators for personal reasons.

I also apply version 1.6.1 Quantum EA (now highly modified) to the chart to assist in trade entries and then I monitor every cycle of trades and may close them out using the EA or updating the Q exit value or use manual intervention.

Before you trade this Q method I highly recommend that you are fully aware of all the pit falls, the very real possibility of developing a large drawdown (DD) and all the peculiarities of how the system works.

You need to test it out fully on a small real account or demo test it, look at various times throughout the day and the week to trade it and 'feel' the method.

This method is far from how I trade in general as I apply price action, harmonics and other technical skills based around the fundamentals of the market if and when applicable.

Having said that I do allocate separate funds to an account that I only trade this method ....

Late last year until now I have not traded the Q Method but plan to start again in the next couple of weeks.

Good trading

Masterrmind..........

*** To all interested traders *** ................

Q Method (Asian Window; small account- live or demo)

I am considering starting a new thread (later towards the end of February with kick-off on March 1 when the real trading commences)

Dedicated to trading the Q Method only (Asian session initially)
Small account (to be determined as it could be as low as $500-$1000) start to show that its possible to grow the account (we all know that if the DD is not controlled it can become fatal since an account size >= $10K is more suitable to this method of trading)


Register your interest here and if I get enough traders keen on the idea I will start a new thread to show you all hopefully what is possible and how I trade the method.

Note:
I must emphasize the fact that this style of trading is NOT what I employ in all of my trading.
It simply has a dedicated small % of my FX trading account allocated to it.
It must be viewed as a somewhat 'risky' trading method no matter your level of trading.
The main aim of the thread is to teach you all how to control risk, manage your positions and ultimately grow a small account into a bigger account.

ps. The greater the number of interested traders posting their interest here will determine whether or not the thread gets started.
pps. I have received several PM's to start a thread on the way I trade the Asian session and also an original request from this threads starter Mer.

Good trading,

Masterrmind........... :nerd:

Count me in, Mastermind!