Dashboard Trading | Page 657 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Trading Dashboard For Currency Basket Trader (EA) 33 replies

I need a Trading Dashboard or Trading Panel 1 reply

Dashboard DB_CCFp-Diff Sessions/News Trading 6 replies

Dashboard trading EURNZD 3 replies

Which dashboard for basket trading? 9 replies

Attachments: Dashboard Trading
Exit Attachments

Dashboard Trading

  • #13,121
  • Edited 3:43pm Nov 27, 2015 6:37am | Edited 3:43pm
Quoting Husky77
{quote} used and open and closed imediate the trade.not sure whats wrong there.
Ok.. it is an experimental feature and I only tested with PINS giving direction, not crosses like the MADdash one does.

So it seems it is a confirmed issue on using PINS as exit on opposite signal when the PIN is a crossing one.

It is doing like... exit on opposite or no signal rather that only on opposite one.

EDIT: It has been confirmed that this was a false positive... the reported issues involved settings producing high volatility alerts at origin. That explains why orders were opening and closing in a row with the exit on opposite PIN setting enabled.
Have you already read the #Post 1 of this thread yet?
  • #13,122
  • Nov 27, 2015 6:41am Nov 27, 2015 6:41am
Quoting aeseme
{quote} Ok.. it is an experimental feature and I only tested with PINS giving direction, not crosses like the MADdash one does. So it seems it is a confirmed issue on using PINS as exit on opposite signal when the PIN is a crossing one. It is doing like... exit on opposite or no signal rather that only on opposite one.
orders are closed very quick.anyway as you said is an experimental and we test how we can.
with many of us testing so we can have more reports about what is working or not.
till things will be sorted out all i can say is a big thank you.
Take what you can, give nothing back
  • #13,123
  • Nov 27, 2015 6:47am Nov 27, 2015 6:47am
Quoting Hotpotato
{quote} You need 21 orders to create a loss ? I can do that with only one ! Your broker must really like you. {image}
You are right . I made a big mistake. And it went wrong.
  • #13,124
  • Nov 27, 2015 6:48am Nov 27, 2015 6:48am
Quoting Husky77
{quote} orders are closed very quick.anyway as you said is an experimental and we test how we can. with many of us testing so we can have more reports about what is working or not. till things will be sorted out all i can say is a big thank you.
And I thank you for testing and for providing feedback... it is much appreciated...

For anyone interested, I posted a new update solving the issue first reported by denya regarding the HA module not being auto activated when filter on it was enabled in options. Post 13,034
Have you already read the #Post 1 of this thread yet?
  • #13,125
  • Nov 27, 2015 7:06am Nov 27, 2015 7:06am
Quoting aeseme
{quote} And I thank you for testing and for providing feedback... it is much appreciated... For anyone interested, I posted a new update solving the issue first reported by denya regarding the HA module not being auto activated when filter on it was enabled in options. Post 13,034
That's correct.. another PIN for that purpose might be used...

By the way, doing a quick test here, I cannot reproduce the reported PIN close on opposite signal issue ... my trades remain open even after having unloaded the MADdash PIN, with PIN enabled and exit on opposite signal as well.... and no signal at all in the PINS column...
Have you already read the #Post 1 of this thread yet?
  • #13,126
  • Nov 27, 2015 7:16am Nov 27, 2015 7:16am
Quoting aeseme
{quote} That's correct.. another PIN for that purpose might be used... By the way, doing a quick test here, I cannot reproduce the reported PIN close on opposite signal issue ... my trades remain open even after having unloaded the MADdash PIN, with PIN enabled and exit on opposite signal as well.... and no signal at all in the PINS column...
see the price
now i have one open GBPCAD
but i think this depends on what settings you have on the other window where Madash indi is
if i set from 15m till 1 month then i get more signals and more trades closed fast
if i set from 1 minute timeframe till h4 then no signals yet to be taken.
see here also http://prntscr.com/97ko4i
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 11111.jpg Size: 173 KB
Click to Enlarge Name: madash111.jpg Size: 280 KB
Take what you can, give nothing back
  • #13,127
  • Nov 27, 2015 7:24am Nov 27, 2015 7:24am
Quoting Husky77
{quote} see the price now i have one open GBPCAD but i think this depends on what settings you have on the other window where Madash indi is if i set from 15m till M then i get more signals and more trades closed fast if i set from 1 minute timeframe till h4 then no signals yet to be taken. see here also http://prntscr.com/97ko4i {image} {image}
I do questioning the standard settings of the MA periods. period 37 in all TF ?? 37 weeks and you are scalping for little pips?
Scan all 28 Forex pairs with ONE chart... Currency Strength28 Indicators
  • #13,128
  • Nov 27, 2015 7:28am Nov 27, 2015 7:28am
Quoting Bernhard
{quote} I do questioning the standard settings of the MA periods. period 37 in all TF ?? 37 weeks and you are scalping for little pips?
i just let that first a default didnt think to start to work with different settings of MA on different timeframes yet.even so start with 15 min till 1 month with MA at 37 i dont see why trades are closed so fast after open.
Take what you can, give nothing back
  • #13,129
  • Nov 27, 2015 7:37am Nov 27, 2015 7:37am
Quoting denya
{quote} Yes, you're absolutely right. That's why I love Thailand. Is anybody here from Thailand ??? Cheap, beautiful, delicious and kind people.
Do you still use SCALP.INC.MULTI profitable? Since I install it and I like how it's set, and this weekend I am playing to translate the full guide with a friend of me Russian, since there is the agenda photo and lot of things that google translate bad.


Thanks,
By failing to prepare, you are preparing to fail.
  • #13,130
  • Nov 27, 2015 7:43am Nov 27, 2015 7:43am
Quoting Hotpotato
I had a quick look at MADash. Wouldn't it just be easier and quicker to write a technical plugin that gives the same info without the 95% code it needs to display it on the screen. It is not that big of a deal.
My quick and short answer would be.. MADdash works, and to me, with a proper strategy is confident enough, so why write again something someone else already did and works OK?

My longer answer would be, I am very focused on another things by the moment and I don't have time to focus on it right now. Of course, it would be good to not only have the alerts, but to have the whole set of data available (already suggested by denya, and I agree mostly), by reading the data it already produces or by programming the very same thing again... but who will make that happen? If you do so, it would be highly appreciated and welcomed of course .
The MADdash PIN was written by derMitay , not by me, and that's why it is already available.. without his help it won't happen so early... so to make things happen faster, sometimes we need the help of each others.
Have you already read the #Post 1 of this thread yet?
  • #13,131
  • Nov 27, 2015 7:45am Nov 27, 2015 7:45am
Quoting Husky77
{quote} see the price now i have one open GBPCAD but i think this depends on what settings you have on the other window where Madash indi is if i set from 15m till 1 month then i get more signals and more trades closed fast if i set from 1 minute timeframe till h4 then no signals yet to be taken. see here also http://prntscr.com/97ko4i {image} {image}
I would not recommend at all the use of the exit on opposite signal feature on such a volatile set of settings ... just MHO

I think that this explains your issue related to orders being closed by exit on opposite PIN direction/signal.. is not an issue.. it is obeying your settings .. .if you have too much signals.. up and down... you will also have orders being opened and closed all the time as well with this setup.

My MADdash has almost default settings.. and the options I change, nothing has to do to the alerts, I don't have that much alerts, but the ones I have are good enough.... of course.. always trying not to be greedy
Have you already read the #Post 1 of this thread yet?
  • #13,132
  • Nov 27, 2015 8:15am Nov 27, 2015 8:15am
Quoting project13et
{quote} Do you still use SCALP.INC.MULTI profitable? Since I install it and I like how it's set, and this weekend I am playing to translate the full guide with a friend of me Russian, since there is the agenda photo and lot of things that google translate bad. Thanks,
oh yes please. i have registered in Russian forum and cant even figure out were are downloads. drop me a PM, thanks!
Scan all 28 Forex pairs with ONE chart... Currency Strength28 Indicators
  • #13,133
  • Nov 27, 2015 8:20am Nov 27, 2015 8:20am
Quoting aeseme
{quote} My quick and short answer would be.. MADdash works, and to me, with a proper strategy is confident enough, so why write again something someone else already did and works OK? My longer answer would be, I am very focused on another things by the moment and I don't have time to focus on it right now. Of course, it would be good to not only have the alerts, but to have the whole set of data available (already suggested by denya, and I agree mostly), by reading the data it already produces or by...
And my short answer would be so you write a dashboard with a trading strategy behind it ( i hope) and then you integrate another dashboard with another strategy but your are running into problems if somebody changes the MADash settings without changing your settings (as you stated some posts ago).

Again the only thing you need from MADash is MA above below on multiple TF's and that should be really easy for a great programmer like you.

In my humble opinion, you trade MADash or you trade your system, no need to over complicate things.
But he, it's your project and i like flashing colors and numbers on my screen.
info@metacharttools,com
  • #13,134
  • Nov 27, 2015 8:20am Nov 27, 2015 8:20am
Quoting aeseme
{quote} I would not recommend at all the use of the exit on opposite signal feature on such a volatile set of settings ... just MHO I think that this explains your issue related to orders being closed by exit on opposite PIN direction/signal.. is not an issue.. it is obeying your settings .. .if you have too much signals.. up and down... you will also have orders being opened and closed all the time as well with this setup. My MADdash has almost default settings.. and the options I change, nothing has to do to the alerts, I don't have that much...
will go with defaults also but still test some other option for scalp condition.as long is in demo nothing to worry about.
thx again for this
Take what you can, give nothing back
  • #13,135
  • Nov 27, 2015 9:12am Nov 27, 2015 9:12am
Quoting Hotpotato
{quote} And my short answer would be so you write a dashboard with a trading strategy behind it ( i hope) and then you integrate another dashboard with another strategy but your are running into problems if somebody changes the MADash settings without changing your settings (as you stated some posts ago). Again the only thing you need from MADash is MA above below on multiple TF's and that should be really easy for a great programmer like you. In my humble opinion, you trade MADash or you trade your system, no need to over complicate things. But...
Easy and Fast and not always on the same page.. it's just MHO as well..

I trade my system, and I trade another systems as well.. I don't stick to only one strategy and/or to only one system.... all strategies as well as all systems have their strengths and flaws, and if we can take the better out of each.. IMHO we are better suited to face what's coming.

It is not that complicated to me
BTW... I don't get why you say that I am over complicating things.. but hey... I can live with that.
Have you already read the #Post 1 of this thread yet?
  • #13,136
  • Nov 27, 2015 9:20am Nov 27, 2015 9:20am
Quoting Husky77
{quote} will go with defaults also but still test some other option for scalp condition.as long is in demo nothing to worry about. thx again for this
I imagine that all this tests on fresh releases are being done in demo accounts... yes....

And yes... testing is always good and needs to be done... I was just wondering why were you trying the exit on reverse with such volatility.... or you didn't realized at that moment?
Have you already read the #Post 1 of this thread yet?
  • #13,137
  • Nov 27, 2015 9:23am Nov 27, 2015 9:23am
Quoting aeseme
{quote} I imagine that all this tests on fresh releases are being done in demo accounts... yes.... And yes... testing is always good and needs to be done... I was just wondering why were you trying the exit on reverse with such volatility.... or you didn't realized at that moment?
didnt realised first,then i started to change MAdash settings to get back to normal
sorry for confusion
Take what you can, give nothing back
  • #13,138
  • Nov 27, 2015 9:23am Nov 27, 2015 9:23am
Quote
It is not that complicated to me
BTW... I don't get why you say that I am over complicating things.. but hey... I can live with that.

With that i meant if you have to start reading and interpreting global vars, colors or signals from another system where you do not have any influence over, i did not mean you dash.
info@metacharttools,com
  • #13,139
  • Nov 27, 2015 9:25am Nov 27, 2015 9:25am
Quoting aeseme
{quote} I imagine that all this tests on fresh releases are being done in demo accounts... yes.... And yes... testing is always good and needs to be done... I was just wondering why were you trying the exit on reverse with such volatility.... or you didn't realized at that moment?
dear aeseme, in your package file there are 2 more Pins HA and Bias. Are they already functional , are we suppose to attach to chart ? thank you..
  • #13,140
  • Nov 27, 2015 9:45am Nov 27, 2015 9:45am
Quoting Hotpotato
{quote} With that i meant if you have to start reading and interpreting global vars, colors or signals from another system where you do not have any influence over, i did not mean you dash.
Hey.. you look pretty funny

It is just a plug-in... if you do not trust it, just don't use.. that's it.... nothing is that complicated.. unless you want to make it that complicated.

And I bet that you make use of several tools and software you have no control over.. as a good programmer as you are I am sure that you know that.

Just to name one... MT4 itself... do you have control over it? do you have it source code? What influence do you have over it? And hey.. what do you use as your trading platform? You don't need to answer... I think we all already know ....

To name another.. in the same topic... the market itself.. what control do you have over it? And all these tools we make or use that reads and interpret data coming from the market... and you make use of the market, don't you? or what are you doing writing tools that reads and interprets data coming from the market, where you do not have influence over?

Ok.. I got bored of that.. I won't be answering anything else related to this topic.

Cheers.
Have you already read the #Post 1 of this thread yet?
7 traders viewing now