{quote}I'm curious about your's and Jibala's thoughts on how things are and ideas about where to go that are lined up with her original concepts for the DASH. The DASH needs to reflect her original intent (since it's based on her already proven and successful concepts). Hope everyone is having a relaxing weekend. -Jason HP, thanks for your continued efforts also. Not simple discerning what may be useful to add (or not!).
- #6,822
- Edited 10:13pm Aug 16, 2015 9:50pm | Edited 10:13pm
- Joined Oct 2006 | Status: Senior Trader | 844 Posts
{quote} No, and the update intervall is set to "n" seconds. It works like a static filter which is useless! Kindly watch the video and you see how it should work and then compare it to what you have and what you are missing! {file} Jibala
Full screen is best.so...
(1) Are your first 3 columns: the current/last and delta (gap) based upon Maria's above absolute strength calc above?
and
(2) the single digits (end column) are the digits that should be added together
to give us the base quote 'sums' that should be 'appearing' in the V3J index filter... right?
"You Never Know.....Until You Find Out."
- #6,823
- Aug 16, 2015 9:59pm Aug 16, 2015 9:59pm
- Joined Jun 2010 | Status: Trader | 1,501 Posts
I coded the masofras-triggers too along with polyfit strength conversion table (close to 10000 values). I'll release later today a version of my db that people can test.. {image}
It will be interesting to see if the Polyfit strength has any merit.....10 000 lines.whewwww.....
- #6,824
- Aug 16, 2015 10:24pm Aug 16, 2015 10:24pm
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
- #6,825
- Aug 16, 2015 10:39pm Aug 16, 2015 10:39pm
- Joined Jun 2014 | Status: Trader | 2,498 Posts
{quote} I watched... several times.
[2] The last column is an additional information only, because what happens very often is that price may turn on a certain level, hence even if a pair is in an e.g. uptrend it may show opposite direction because of a negative gap! It has nothing to do with the index filter but must be counted in, if used!
The values in column "LAST" are updated every "n" seconds, in my case I set it to 1800 sec.
I just was looking for a good example and I found AUDCAD. It is still (if I only look from daily open) in an uptrend (slightly) but it hangs on a resistance level which is the Fridays High. It has a negative gap in an uptrend, hence it shows direction down.
Jibala
PDF & BCC (Patience Discipline Focus & Belief Confidence Consistency)
- #6,826
- Aug 16, 2015 10:53pm Aug 16, 2015 10:53pm
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
- #6,827
- Aug 16, 2015 11:32pm Aug 16, 2015 11:32pm
- | Joined Apr 2014 | Status: Trader | 1,900 Posts
Sync is updated with every dashboard update NOT with the strength update interval. {image} {image}
- #6,829
- Aug 17, 2015 12:02am Aug 17, 2015 12:02am
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
- #6,830
- Aug 17, 2015 12:05am Aug 17, 2015 12:05am
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
- #6,832
- Edited 1:23am Aug 17, 2015 12:48am | Edited 1:23am
I have tested a lot but of course i cant test everything alone. Just to many possibilities. Just give it a spin I am running with filters: Bidratio + Relative strength + BuySell ratio + Gap direction/size + sync index. So a bit Bare bone. Added one more thing to the sync index. {image} {file}
Thanks HP. To avoid incorrect settings DASHBOARD and error, install it in strict accordance with the instructions.Save your and developer time on unnecessary questions.
=================================== ===============
And last build Dashboard - Currency MeterV3L all in one. It includes all the necessary files and indicators for DASHBOARD.
INSTALLATION in Russian.
=================================== ==================
УСТАНОВКА:
1. Скачать архив с прикрепленного к посту архива.
2. Распаковать содержимое архива в папку с установленным МТ4. МТ4 должен быть установлен в любую папку КРОМЕ ProgramFiles! Например на C://FOREX/MT4/.
3. Убедиться, что в окне "Обзора рынка" присутствуют все 28 валютных пар + золото. Если нет - добавить недостающие. Лишние валютные пары необходимо удалить из "Окна обзора".
4. Открыть график по Золоту (XAUUSD), любой таймфрейм.
5. Загрузить историю всех пар. Для этого просто перетаскиваем скрипт ForceLoadHistoricalData в открытое окошко по любой паре. Все! Котировки по всем парам автоматом загрузятся.
6. Перетащить на открытый график (рекомендую график золота Н1) советник Dashboard - Currency MeterV3K.
7. В настройках советника загрузить СЕТ. Например сет [DB Set9][14.08.15][HP-MariaV1 V3K].set
Если у вас не отображаются данные на панеле доски, то есть 2 не описанных причины этого:
1.Если у вас в терминале НЕ ВСЕ 28+Gold ПАРЫ, то придется вручную через запятую прописывать все (кроме той которой нет) в свойствах советника пары, для этого:
а)В параметре Use the default 28 pair ставим false
б)Прописываем через запятую все пары в параметре Comma seperated own pair list.
2.Необходимо периодически менять доску на новую. К проекту разработки доски подключено 4 опытнейших программиста, поэтому СКОРОСТЬ появления новых версий ошеломляет.
=================================== ======================
INSTALLATION in ENGLISH.
1. Download the archive with the archive attached to the post.
2. Extract the contents of the archive in the folder containing the MT4. MT4 must be installed in any location EXCEPT ProgramFiles! For example C: // FOREX / MT4 /.
3. Make sure that in the "Market Watch" contains all 28 currency pairs + Gold. If not - add the missing. The extra currency pairs must be removed from the "Window overview".
4. Open the schedule on Gold (XAUUSD), any timeframe.
5. Upload the history of all currency pairs. Simply drag the script ForceLoadHistoricalData to the open window for any couple. It's all! Quotes for all currency pairs loaded automatic.
6. Drag to the open graph (I recommend the H1 chart of gold) EA Dashboard - Currency MeterV3K.
7. In the advisor settings upload the set. For example set [DB Set9][14.08.15][HP-MariaV1 V3K].set
If you do not display the data on the panel board, the reasons for this:
1. If you have a terminal NOT ALL 28 + Gold PAIRS, you have to manually register all separated by commas (except that which is not in MT4) in the properties advisor pairs for this:
a) expert parameters "Use the default 28 pair" set "false"
b) expert parameters "Comma seperated own pair list" put a comma every pair you want
2. It is necessary to periodically change the board to the new board. For the project development board connected 4 experienced programmers, so the rate of appearance of new versions of staggering.
=================================== ===========================
Stay hungry to be free...
- #6,834
- Aug 17, 2015 2:24am Aug 17, 2015 2:24am
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
- #6,836
- Aug 17, 2015 2:52am Aug 17, 2015 2:52am
- Joined Jun 2014 | Status: Trader | 2,498 Posts
I have tested a lot but of course i cant test everything alone. Just to many possibilities. Just give it a spin I am running with filters: Bidratio + Relative strength + BuySell ratio + Gap direction/size + sync index. So a bit Bare bone. Added one more thing to the sync index. {image} {file}
Was watching the dash for more than 30 min. and Sync for NZD is not updating at all! I'm doing something wrong?
Jibala
PDF & BCC (Patience Discipline Focus & Belief Confidence Consistency)
- #6,837
- Aug 17, 2015 2:59am Aug 17, 2015 2:59am
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
- #6,839
- Edited 3:21am Aug 17, 2015 3:07am | Edited 3:21am
- | Commercial User | Joined Nov 2013 | 4,947 Posts
info@metacharttools,com
