Trapping System: Tunnel Martingale

Thank you for your answer.

I try to SELL first(StartFrom=1) when EA start, it works!
So actually I can have Buy.set and Sell.set file. and stop every 1 cycle, don't need button.

Now I use Gap=100point(10pips), it also miss the 0.32 orders. Journal did not show the program execute 0.32 orders. Anyway to overcome it?

Another problem
I set the Gap =100 points, ProfitTarget=2.00,
The Breakeven at 1.12388, and Profit at 1.12438 seem incorrect?


txt01=[COMMON]
StartType=1
ProfitLineColor=65535
BreakEvenCheckIntv=5
TextColor=55295
UpperGapPriceColor=13382297
LowerGapPriceColor=36095
TextSize=8
MagicNumber=8081
LineStyle=0
LineWidth=1
LineHeight=13
DateTimeType=0
DailyStartTime=01:00:00
DailyStopTime=00:00:00
CommentInfo=TUNNELMARTINGALE
txt05=[SLIPPAGE]
UseSlippage=false
ClosingSlippage=0
OpeningSlippage=0
txt02=[LOT(S)]
StartAmountType=1
StartDynamicAmount=0.000002
StartFixedAmount=0.02
txt03=[MARTINGALE]
MartingaleFactor=1,2,4
MaxMartingaleFactor=25
FactorMultiplier=2.0
FactorOperator=0
MartingaleGap=100
MaxMartingaleCycle=1
txt04=[TARGET]
TargetType=0
TrailingTargetType=0
ProfitTarget=2.00
ProfitTargetMultiplier=0.0001
TrailingTarget=10.0
TrailingTargetMultiplier=0.002
UseProfitLoss=false
ProfitLoss=-9999999.0
ProfitLossMultiplier=-9999999.0
PointsTargetType=0
PointsTarget=20
PointsLoss=100
PointsTargetColor=32768
PointsLossColor=16711935
txt06=[START ANYTIME]
StartFrom=1
StartNextFrom=0
txt07=[START SUPPORT & RESISTANCE]
PivotColor=8388736
SNR1Color=65535
SupResRecTime=09:00
txt08=[START DAILY HIGH LOW & X-Points]
HighLowColor=13959039
DailyHighLowRecTime=14:00
AnchorPrice=0
XPointsTrigger=10
txt09=[START SNR, HI-LO, XPoints]
OrderDirection=0
txt99=[DEBUG]
IsDebug=false
IsDevelopment=false
TimeRange=30

I test it on another broker platform. Same problem, the 5th orders not submitting out.

found a bug
Buy first (StartFrom=0) , it can go to 5th order.
Sell first (StartFrom=1), it can NOT go to 5th order, EA hanged!

ok, will check it out sometime today.

Thank you radityo.

just another one happended, stop at 5th order, cannot submit 6th order, EA hanged also.
this time cycle start buy first(StartFrom=0).



txt01=[COMMON]
StartType=1
ProfitLineColor=65535
BreakEvenCheckIntv=5
TextColor=55295
UpperGapPriceColor=13382297
LowerGapPriceColor=36095
TextSize=8
MagicNumber=8080
LineStyle=0
LineWidth=1
LineHeight=13
DateTimeType=0
DailyStartTime=01:00:00
DailyStopTime=00:00:00
CommentInfo=TUNNELMARTINGALE
txt05=[SLIPPAGE]
UseSlippage=false
ClosingSlippage=0
OpeningSlippage=0
txt02=[LOT(S)]
StartAmountType=1
StartDynamicAmount=0.000002
StartFixedAmount=0.01
txt03=[MARTINGALE]
MartingaleFactor=1,2,4
MaxMartingaleFactor=25
FactorMultiplier=2.0
FactorOperator=0
MartingaleGap=50
MaxMartingaleCycle=0
txt04=[TARGET]
TargetType=0
TrailingTargetType=0
ProfitTarget=0.50
ProfitTargetMultiplier=0.0001
TrailingTarget=10.0
TrailingTargetMultiplier=0.002
UseProfitLoss=false
ProfitLoss=-9999999.0
ProfitLossMultiplier=-9999999.0
PointsTargetType=0
PointsTarget=20
PointsLoss=100
PointsTargetColor=32768
PointsLossColor=16711935
txt06=[START ANYTIME]
StartFrom=0
StartNextFrom=0
txt07=[START SUPPORT & RESISTANCE]
PivotColor=8388736
SNR1Color=65535
SupResRecTime=09:00
txt08=[START DAILY HIGH LOW & X-Points]
HighLowColor=13959039
DailyHighLowRecTime=14:00
AnchorPrice=0
XPointsTrigger=10
txt09=[START SNR, HI-LO, XPoints]
OrderDirection=0
txt99=[DEBUG]
IsDebug=false
IsDevelopment=false
TimeRange=30

Another happening, stop at 6th order, 7th order hanged.
I think the problem is not how many order. The main problem is EA hanged. May not due to the EA. Could it be my computer or network problem? Or maybe is the broker problem? but I tried two different brokers, oanda and IC martket, both also encountered EA hanged often. So unlikely is brokers problem?

The test result is attached below.
So far my problem is EA hanged.

http://www.fengshui-bank.com/Statement2.htm

This time can go up to 64lots but the EA failed to take profit when reach/exceed target. My profit target is $0.5, and it already has $3.15 profit.
Maybe hanged already.

I remove the EA, and it show blank window, by right EA will open a window to ask me to proceed to close all position or not. so confirm EA hanged already.

Very interesting,
spike also work!

Let's it run over night, still running, did not hanged, max number of lots 0.08 (4th order).

Hence, the problem now is to find out what cause it to hanged at higher order?

Result as shown: http://www.fengshui-bank.com/Statement3.htm

hanged again at 5th order !
Trade Records: http://www.fengshui-bank.com/Statement5.htm

ok. I think let me try on your other broker, same as you.
I believe this issue is due to the many factors related to broker. I do experienced it with my old broker (AGEA). This tunnel martingale can't be attached to that broker, due to its high spread, and so many slippage applied. So this factor affecting the EA operation (I do experienced this, that is why I moved to Tickmill, since it is more stable).

Please test on your side with Tickmill, either Classic or Exchange account. Meanwhile, let me test overnight with your IC Markets and Oanda. I will test it on my VPS and see tomorrow.

Thanks Radityo.
Just got Tickmill demo running.

I'm testing your IC markets, with the same setting as http://www.forexfactory.com/showthre...98#post8259198

Only change from my side is:
time: 00:00:00 to 23:59:59
and Gaps I set to 100
We'll see...

Attached Image (click to enlarge)

I tried Tickmill a while only HANGED!
My profit target $0.5, EA hanged, cannot take profit. I did manually take profit.

trading record: http://www.fengshui-bank.com/Statement7.htm

Tickmill Hanged again!

Tickmill another hanged
4th order already hanged

I do manually take profit, much more than target $0.5, haha

will change back to ICMarkets to compare.