Dashboard Trading | Page 10 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Trading Dashboard For Currency Basket Trader (EA) 33 replies

I need a Trading Dashboard or Trading Panel 1 reply

Dashboard DB_CCFp-Diff Sessions/News Trading 6 replies

Dashboard trading EURNZD 3 replies

Which dashboard for basket trading? 9 replies

Attachments: Dashboard Trading
Exit Attachments

Dashboard Trading

  • #181
  • Mar 26, 2015 7:40pm Mar 26, 2015 7:40pm
Quoting eurotrading
{quote} Hello everyone I noticed that V2 is slower compared to the V1, movements of balances. The v1 is fully synchronized with the balances shown on MT4 Instead v2, doing pretty retarded. At least that's my case, not if I change something in that situation relantize V2 HotPotato a greeting {image}
I believe the refresh times have been made higher in V2. I think I read somewhere the constant updating (is it real time? I haven't used V1.) was causing flickering, so to fix this the refresh or update rate was made higher (eg. instead of updating in real time, it updates every (x) seconds)
  • #182
  • Mar 26, 2015 7:50pm Mar 26, 2015 7:50pm
hi,

I load Forex Strength_Dashboard but show this..

how to fix it?

Thanks!
Attached Image (click to enlarge)
Click to Enlarge Name: QQ图片20150327104724.png Size: 9 KB
  • #183
  • Mar 26, 2015 7:54pm Mar 26, 2015 7:54pm
Added more trades to last nights positions on Strength bot.....

I will hopefully finish the updated version of the Forex Strength Dashboard this weekend.....

It will include the Currency strength of the Bases........USD, EUR.......
Attached Image (click to enlarge)
Click to Enlarge Name: fs4.png Size: 113 KB
  • #184
  • Mar 26, 2015 8:01pm Mar 26, 2015 8:01pm
Quoting pierre23
{quote} I believe the refresh times have been made higher in V2. I think I read somewhere the constant updating (is it real time? I haven't used V1.) was causing flickering, so to fix this the refresh or update rate was made higher (eg. instead of updating in real time, it updates every (x) seconds)
Yes, I have taken out the onTick function in the new version as this caused the flickering on every tick...
It now uses the OnTimer function which refreshes every minute....
  • #185
  • Mar 26, 2015 8:02pm Mar 26, 2015 8:02pm
Quoting eurotrading
{quote} Hello everyone I noticed that V2 is slower compared to the V1, movements of balances. The v1 is fully synchronized with the balances shown on MT4 Instead v2, doing pretty retarded. At least that's my case, not if I change something in that situation relantize V2 HotPotato a greeting {image}
Change settings for "EventSetTimer(10);" and you are done (it may use more ressources!). I have an i7 running so no problem at all.
Attached Image (click to enlarge)
Click to Enlarge Name: Ashampoo_Snap_2015.03.27_10h53m03s_019_.png Size: 31 KB

Jibala
PDF & BCC (Patience Discipline Focus & Belief Confidence Consistency)
  • #186
  • Mar 26, 2015 8:04pm Mar 26, 2015 8:04pm
Quoting 274275025
hi, I load Forex Strength_Dashboard but show this.. how to fix it? Thanks! {image}
Make sure you have all 28 pairs in the Market Watch window.....
  • #187
  • Mar 26, 2015 8:08pm Mar 26, 2015 8:08pm
Quoting JibalaPasan
{quote} Change settings for "EventSetTimer(10);" and you are done (it may use more ressources!). I have an i7 running so no problem at all. {image} Jibala
Thanks JibalaPasan......I did not even realize that it got changed from 1 to 10.....lol
  • #188
  • Mar 26, 2015 8:18pm Mar 26, 2015 8:18pm
Quoting Gvc
{quote} Make sure you have all 28 pairs in the Market Watch window.....
Hi Gvc,

Thank you for this Dashboard, please i have the same issue and i am sure that 28 pairs are included. also please note that V2a is working without any issue.

Thanks again
  • #189
  • Mar 26, 2015 8:25pm Mar 26, 2015 8:25pm
Quoting AbhijetPandi
Testing Dashboard with Auto trade. Hope this is OK with you? 1. H4 and D1 on same direction then accordingly Buy or Sell 2. If M15 is Up, then close Sell trade if any 3. If M15 is down then close Buy trade if any Not sure about exit rules, so started testing with M15 in opposite direction. Please suggest. {file}
Hi AbhijetPandi,

i started testing the auto tread that you shared, i noticed that it will open a lot of transactions once i start the EA. do you know the reason for that.
  • #190
  • Mar 26, 2015 8:26pm Mar 26, 2015 8:26pm
Quoting htawfik
{quote} Hi Gvc, Thank you for this Dashboard, please i have the same issue and i am sure that 28 pairs are included. also please note that V2a is working without any issue. Thanks again
After making sure all pairs are in the market watch, have you tried restarting metatrader
  • #191
  • Mar 26, 2015 8:26pm Mar 26, 2015 8:26pm
Quoting htawfik
{quote} Hi Gvc, Thank you for this Dashboard, please i have the same issue and i am sure that 28 pairs are included. also please note that V2a is working without any issue. Thanks again
Have a look if you have enough historical data for the "monthly". I have same problem and it will not download the history for monthly!
Attached Image (click to enlarge)
Click to Enlarge Name: Ashampoo_Snap_2015.03.27_11h24m47s_020_History Center- USDCAD-Monthly.png Size: 46 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Ashampoo_Snap_2015.03.27_11h27m30s_021_.png Size: 35 KB

Jibala
PDF & BCC (Patience Discipline Focus & Belief Confidence Consistency)
  • #192
  • Mar 26, 2015 8:29pm Mar 26, 2015 8:29pm
Quoting JibalaPasan
{quote} Have a look if you have enough historical data for the "monthly". I have same problem and it will not download the history for monthly! {image} {image} Jibala
Ok thanks for help, i will try it
  • #193
  • Mar 26, 2015 8:30pm Mar 26, 2015 8:30pm
Quoting Gvc
{quote} Make sure you have all 28 pairs in the Market Watch window.....
Thanks for your reply,

I right click market watch and show all currency,but still have this error..
  • #194
  • Mar 26, 2015 8:33pm Mar 26, 2015 8:33pm
Hi Gvc,

Please note that if we run the two V2a in the same MT4 and even if we change the magic number for each EA, the profit by amount and pips will be the same for both of the two EA. i mean that it will not show and calculate only the transactions that belong to the magic number that you used for each one.
  • #195
  • Mar 26, 2015 8:56pm Mar 26, 2015 8:56pm
Quoting JibalaPasan
{quote} Have a look if you have enough historical data for the "monthly". I have same problem and it will not download the history for monthly! {image} {image} Jibala
the issue is still, i checked the following:
1. 28 pairs are avilable
2. run the script for loading the history
3. check the history for each pair (from 1M to 1MN) to make sure that enough history is their

any idea of the reason of this error?
  • #196
  • Mar 26, 2015 8:57pm Mar 26, 2015 8:57pm
Quoting htawfik
Hi Gvc, Please note that if we run the two V2a in the same MT4 and even if we change the magic number for each EA, the profit by amount and pips will be the same for both of the two EA. i mean that it will not show and calculate only the transactions that belong to the magic number that you used for each one.
It takes all trades that are currently open and displays the P/L. I currently have a trade open for gold XAUAUD and it's showing that P/L too.

Also if you use the 'close' buttons for the respective pairs, will it also close all positions for that pair (even if they were two separate transactions belonging to different magic numbers)?
  • #197
  • Mar 26, 2015 8:58pm Mar 26, 2015 8:58pm
I load historical data from another broker and only copied the missing monthly, now it works!
Attached Image (click to enlarge)
Click to Enlarge Name: Ashampoo_Snap_2015.03.27_11h54m00s_022_.png Size: 170 KB

Jibala
PDF & BCC (Patience Discipline Focus & Belief Confidence Consistency)
  • #198
  • Mar 26, 2015 9:13pm Mar 26, 2015 9:13pm
Quoting pierre23
{quote} It takes all trades that are currently open and displays the P/L. I currently have a trade open for gold XAUAUD and it's showing that P/L too. Also if you use the 'close' buttons for the respective pairs, will it also close all positions for that pair (even if they were two separate transactions belonging to different magic numbers)?
It doesnt show any of the other trades (see my screen above)! I also have open trades (opened with V2).

Jibala
PDF & BCC (Patience Discipline Focus & Belief Confidence Consistency)
  • #199
  • Mar 26, 2015 9:15pm Mar 26, 2015 9:15pm
Quoting JibalaPasan
{quote} It doesnt show any of the other trades (see my screen above)! I also have open trades (opened with V2). Jibala
Weird, it's showing it for me ...
  • #200
  • Mar 26, 2015 9:20pm Mar 26, 2015 9:20pm
Quoting htawfik
{quote} Hi AbhijetPandi, i started testing the auto tread that you shared, i noticed that it will open a lot of transactions once i start the EA. do you know the reason for that.
Yes, it will start trading once the EA is activated. This can be change to "Start" an "Stop". Currently, checking trend direction and opening position code is in OnTimer() function.

Have modified the EA again based on new Forex Strength dashboard:
1. Intra Day or Daily Bias is Up/Down, open trade accordingly and close the opposite direction trade.
Attached File(s)
File Type: mq4 Forex Strength_Dashboard Auto Trade.mq4   95 KB | 3,905 downloads
7 traders viewing now