Candle Pip Counter in MT4 | Page 3 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Pip counter indicator on the current candle 10 replies

MT4 candle-by-candle manual backtesting 9 replies

I need an Candle Pip Counter with high+low and open and close 0 replies

Daily pip counter 12 replies

Pip counter 15 replies

Attachments: Candle Pip Counter in MT4
Exit Attachments

Candle Pip Counter in MT4

  • #41
  • Sep 19, 2014 12:20am Sep 19, 2014 12:20am
gumrai i have humble reqest ..i know you are too busy .may be this place is not right for this request .last you made candle pips blocks for me ..many many thaks again...it is my humble request chck given EA(found from FF links http://www.forexfactory.com/showthread.php?t=213832) at your convenient time and if possible then please add following options :

1.after hit horizontal line wait for another candle to cross hi/lo for open buy/sell of (hit candle)if possible to add retrace or test horizontal line then open trade.
2.i want after execute/open one trade horizontal line deactivate means no auto buy/sell

Looking forward for your response.God Bless you.
Say something meaningful or Silence!!
  • #42
  • Sep 19, 2014 12:42am Sep 19, 2014 12:42am
Sorry, but I have absolutely no free time at the moment.
Please Do Not PM Me With Coding Enquiries
  • #43
  • Sep 19, 2014 5:13am Sep 19, 2014 5:13am
Quoting Gumrai
Sorry, but I have absolutely no free time at the moment.
THANKS FOR REPLY. no problem take time ...i will wiat ...thanks
Say something meaningful or Silence!!
  • #44
  • Sep 24, 2014 3:43pm Sep 24, 2014 3:43pm
I've made some minor adjustments to these
Changed the offset so that the text does not obscure the candle wicks
Also 1.1 was doing some unnecessary printing to the Experts log file.
Attached File(s)
File Type: ex4 CandlePipsv1.1.ex4   9 KB | 970 downloads
File Type: ex4 CandlePipsv1.2.ex4   11 KB | 1,575 downloads
Please Do Not PM Me With Coding Enquiries
  • #45
  • Oct 29, 2014 9:47pm Oct 29, 2014 9:47pm
Quoting Gumrai
I've made some minor adjustments to these Changed the offset so that the text does not obscure the candle wicks Also 1.1 was doing some unnecessary printing to the Experts log file. {file} {file}
Hey awesome tool, I was wondering if you would also be able to add in a maximum candle pip count so you would be able to look for ranges ?
Learn, a forex trader must, unlearn and relearn he will.
  • #46
  • Oct 29, 2014 11:44pm Oct 29, 2014 11:44pm
Quoting COGSx86
{quote} Hey awesome tool, I was wondering if you would also be able to add in a maximum candle pip count so you would be able to look for ranges ?
Sorry, I simply have no spare time at the moment
Please Do Not PM Me With Coding Enquiries
  • #47
  • Jan 3, 2015 6:44pm Jan 3, 2015 6:44pm
Quoting Gumrai
Try this. Obviously I haven't tested it when the market is open. You can input how many candles you want it to work on. If you set the time-frame to chart timeframe, if you change tf it will work with the new tf. Otherwise with the selected tf. If you click on the o to the left of the tf block, you can move the blocks and then click again. That is click and release, not click and drag. {file}
Hi Gumrai,

Is there dashboard indicator can show us total pips in multi time frame and multi pair. it can show us current and 3 back bars and also The color of the number should change according to the candle condition whether up or down or enfulging. so we can view multi TF and multi pair in one chart. below is the indi i currently use but i have to switch every charts. your help is much appreciated. tq
Attached File(s)
File Type: ex4 # Hi Low - Open Close CANDLES.ex4   49 KB | 1,452 downloads
Attached File(s)
File Type: mq4 mikko_mtf_info.mq4   11 KB | 1,405 downloads
  • #48
  • May 15, 2015 5:49pm May 15, 2015 5:49pm
Quoting Gumrai
I've made some minor adjustments to these Changed the offset so that the text does not obscure the candle wicks Also 1.1 was doing some unnecessary printing to the Experts log file. {file} {file}
Hello Gumrai, Please could you change the pips (Text Colour) if candle is Bull (Up) pips colour Lime, and if candle is Bear (Down) pips colour Red
(in the version CandlePipsv1.1.ex4)

Thanks And Regards,
Moti
  • #49
  • Edited 8:50pm May 15, 2015 6:51pm | Edited 8:50pm
Quoting Motiram
{quote} Hello Gumrai, Please could you change the pips (Text Colour) if candle is Bull (Up) pips colour Lime, and if candle is Bear (Down) pips colour Red (in the version CandlePipsv1.1.ex4) Thanks And Regards, Moti
Just quickly tested

EDIT: text offset changed and uploaded in post #51
Attached File(s)
File Type: ex4 CandlePipsv1.1 Bull Bear Colour.ex4   10 KB | 1,362 downloads
Please Do Not PM Me With Coding Enquiries
  • #50
  • May 15, 2015 7:05pm May 15, 2015 7:05pm
Quoting Gumrai
{quote} Just quickly tested {file}
Thank you Gumrai, for giving a quick solution much obliged, it is perfect but why text is gone offset (I mean Away from the high point) respect to old version please could you check

Thank you

Regards,
Moti
  • #51
  • May 15, 2015 8:11pm May 15, 2015 8:11pm
Quoting Motiram
{quote} Thank you Gumrai, for giving a quick solution much obliged, it is perfect but why text is gone offset (I mean Away from the high point) respect to old version please could you check Thank you Regards, Moti
Hi,
I didn't change the way that the offset is calculated, so it should be no different to before.
However, I have changed the way that I do the offset since I coded the indicator.
Try this, I have just changed it to how I do it now
Attached File(s)
File Type: ex4 CandlePipsv1.1 Bull Bear Colour.ex4   10 KB | 1,463 downloads
Please Do Not PM Me With Coding Enquiries
  • #52
  • May 15, 2015 8:23pm May 15, 2015 8:23pm
Quoting Gumrai
{quote} Hi, I didn't change the way that the offset is calculated, so it should be no different to before. However, I have changed the way that I do the offset since I coded the indicator. Try this, I have just changed it to how I do it now {file}
Gumrai, now it is perfect I do appreciate your support

Thank you

Regards,
Moti
  • #53
  • Jun 12, 2015 9:14am Jun 12, 2015 9:14am
Quoting Gumrai
{quote} Hi, I didn't change the way that the offset is calculated, so it should be no different to before. However, I have changed the way that I do the offset since I coded the indicator. Try this, I have just changed it to how I do it now {file}
Hello Gumrai,

The current CandlePipsv1.1 Bull Bear Colour.ex4 indicator has 2 options to find the Range for candle
1-Open_Close
2-High_Low
Before posting my new request I did search in all the net and in FF site but could not find what I need please if it not much can you add if possible following feature to this indicator and could show
1-Upper_Pin_Bar pips
2-Open_Close pips
3-Lower_Pin_bar pips

Images is attached

Thanks And Regards,
Moti
Attached Image (click to enlarge)
Click to Enlarge Name: Candle And Pinbar Pips_1.png Size: 32 KB
  • #54
  • Jun 13, 2015 5:27am Jun 13, 2015 5:27am
Hello Gumrai,

After long week days and hours searching I found the following indicator which display the upper & lower pin pips but it does not work as good as yours does not display pips vertically and text offset also does not work well on all time frames as yours

My request if you could make it, as yours than I will place both and will serve my purpose if you could make 2 in one that will be the great of you.

Thanks And Regards,
Moti
Attached File(s)
File Type: mq4 CandleWicksDisplay.mq4   6 KB | 1,151 downloads
  • #55
  • Jun 13, 2015 7:57pm Jun 13, 2015 7:57pm
Quoting Motiram
Hello Gumrai, After long week days and hours searching I found the following indicator which display the upper & lower pin pips but it does not work as good as yours does not display pips vertically and text offset also does not work well on all time frames as yours My request if you could make it, as yours than I will place both and will serve my purpose if you could make 2 in one that will be the great of you. Thanks And Regards, Moti {file}
Motiram-
I modified CandleWicksDisplay. I don't know if its quite the way you want it. If not LMK.
Attached Image (click to enlarge)
Click to Enlarge Name: CandleWicks1.PNG Size: 44 KB
Attached File(s)
File Type: mq4 CandleWicksDisplay_mod.mq4   7 KB | 1,057 downloads
  • #56
  • Jun 13, 2015 9:21pm Jun 13, 2015 9:21pm
Quoting cyber1
{quote} Motiram- I modified CandleWicksDisplay. I don't know if its quite the way you want it. If not LMK. {image} {file}
Hello cyber1, First of all I want to thank you for your support and helping to solve my request

Looking to the data that is what I request and it is quite perfect. But need text bit alignment

1-Text could be placed in the centre of the upper wick and when Time Frame is changed should not go away from the upper wick offset must be set with fix distance
2-Text could be displayed over lime candle LIME and over red in RED colour
3-Text can be rounded in numbers as for example (3.4=3) (3.6=4)
4-Text down the candle can be removed.

And I forgot if possible could be added total length of the candle also.

Please see the image attached for details
Regards,
Moti
Attached Image (click to enlarge)
Click to Enlarge Name: Candle Wick.jpg Size: 119 KB
  • #57
  • Edited 11:57am Jun 14, 2015 6:49am | Edited 11:57am
Quoting Motiram
{quote} Hello cyber1, First of all I want to thank you for your support and helping to solve my request Looking to the data that is what I request and it is quite perfect. But need text bit alignment 1-Text could be placed in the centre of the upper wick and when Time Frame is changed should not go away from the upper wick offset must be set with fix distance 2-Text could be displayed over lime candle LIME and over red in RED colour 3-Text can be rounded in numbers as for example (3.4=3) (3.6=4) 4-Text down the candle can be removed....
Motiram-
Unfortunately in MT4 it is not possible to center the text on the candle, you can only shift it left or right. So I've added an input TextLRShift which is set to 0 if you set it to 1 it will place it one candle further to the left.

I have rounded the numbers and have added a padding function for numbers that are less than 10 but when the numbers are 3 digits it becomes difficult to read so I've added an input Sep. Any text in that input will be displayed between each variable.

I have added the overall length variable.

There is a separate input DisplayWickDistanceDaily for the daily text position which when you switch time frames it automatically inserts the correct setting.
Attached Image (click to enlarge)
Click to Enlarge Name: CandleWicks2.PNG Size: 38 KB
Attached File(s)
File Type: mq4 CandleWicksDisplay_mod.mq4   6 KB | 1,034 downloads
  • #58
  • Edited 10:28am Jun 14, 2015 7:30am | Edited 10:28am
Quoting cyber1
{quote} Motiram- Unfortunately in MT4 it is not possible to center the text on the candle, you can only shift it left or right. So I've added an input TextLRShift which is set to 0 if you set it to 1 it will place it one candle further to the left. I have rounded the numbers and have added a padding function for numbers that are less than 10 but when the numbers are 3 digits it becomes difficult to read so I've added a]n input Sep. Any text in that input will be displayed between each variable. I have added the overall length variable. There is...
Thank you cyber1,

Unfortunately in MT4 it is not possible to centre the text on the candle, you can only shift it left or right. So I've added an input TextLRShift which is set to 0 if you set it to 1 it will place it one candle further to the left.

I do not have minimum idea about coding but if you try the code is in the #Post51 the text is centred on the upper wick of the candle and when TF is changed, text reset offset automatically , may it be could not applied when multiple text is displayed.

I have rounded the numbers and have added a padding function for numbers that are less than 10 but when the numbers are 3 digits it becomes difficult to read so I've added a]n input Sep. Any text in that input will be displayed between each variable.

The option you have added to choose separator between each variable, which is very perfect for text visualizing, I do like your this idea very much

I have added the overall length variable.

I am great full to you for solving my request and adding total length of candle pip too.

Please can you look when I remove the indicator, text is not removed remain on the chart

Regards,
Moti
  • #59
  • Jun 14, 2015 11:24am Jun 14, 2015 11:24am
Hi Gumrai,

I like your candle length indicator, I wonder if you could modify it to show the Arrow up for Bull candle & arrow down for Bear candle
with size in pips on candles above / below with arrows only.

I don't need all the candles to show pips sizes as your indicators show here.

Attached File(s)
File Type: mq4 CandleLength.mq4   4 KB | 1,351 downloads
It never gets easier, you just get better
  • #60
  • Jun 14, 2015 12:12pm Jun 14, 2015 12:12pm
Quoting Motiram
{quote} Thank you cyber1, Unfortunately in MT4 it is not possible to centre the text on the candle, you can only shift it left or right. So I've added an input TextLRShift which is set to 0 if you set it to 1 it will place it one candle further to the left. I do not have minimum idea about coding but if you try the code is in the #Post51 the text is centred on the upper wick of the candle and when TF is changed, text reset offset automatically , may it be could not applied when multiple text is displayed. I have rounded the numbers and have added...
Motiram-
Correction I know of no way to center it.
http://forum.mql4.com/58406/page2

But I do see that Gumrai somehow did it so apparently there is a way to do it. unfortunately I don't have the time to figure out how so you'll have to wait for him to come back and show us.

I'm not able to reproduce the problem with objects not being deleted when the indicator is removed so can't help you with that.
0 traders viewing now