Auction Market Theory and Market Profile | Page 283 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Auction Market Value Theory & Analytics 1,757 replies

market Theory 101 Supply and Demand,Market Cycles 7 replies

Market Profile And Volume Profile MT5 7 replies

MarketProfile/Volume Profile/Auction Market Theory indi? 17 replies

Market profile trader-Merged profile 0 replies

Attachments: Auction Market Theory and Market Profile
Exit Attachments

Auction Market Theory and Market Profile

  • #5,641
  • May 4, 2014 9:21am May 4, 2014 9:21am
Hi Lock,

Nice indicator.

I'd like to unsplit TPO but I dont know how I've to do it.

I read the thread this week-end and I saw that +TPO_range or TPO-range V3 are supposed to be able showing 30 days composite profile as you can see here :

http://www.forexfactory.com/showthre...11#post5995711


Has someone has idea bcs it seems impossible to do it now?

I tested Cluster_delta Volume profile the last week, it's good stuff. We can work with this indicator.


Last question, is it possible to get the old MT4 version?

Thank you.
  • #5,642
  • May 4, 2014 12:49pm May 4, 2014 12:49pm
Quoting Beyondprice
Hi Lock, Nice indicator. I'd like to unsplit TPO but I dont know how I've to do it. I read the thread this week-end and I saw that +TPO_range or TPO-range V3 are supposed to be able showing 30 days composite profile as you can see here : http://www.forexfactory.com/showthre...11#post5995711 Has someone has idea bcs it seems impossible to do it now? I tested Cluster_delta Volume profile the last week, it's good stuff. We can work with this indicator. Last question, is it possible to get the old MT4 version? Thank you.

  1. To unsplit tpo periods:


ShowSplitProfile=false

  1. Old mt4 here (and remember to deny access to the MetaQuotes folder)

  1. +TPO_range, as MzVega told you:

  1. set Range mode= 1 43200 (monthly)

or

  1. set Range mode= 0 using the vertical lines to set the boundaries to determine the length of the month profile. (blue line is from while red line is to)

or

  1. using +TPO instead of +TPO_range: set Range period = 43200 (monthly).

Ubi maior minor cessat
  • #5,643
  • May 4, 2014 1:40pm May 4, 2014 1:40pm
Quoting Beyondprice
I read the thread this week-end and I saw that +TPO_range or TPO-range V3 are supposed to be able showing 30 days composite profile as you can see here : http://www.forexfactory.com/showthre...11#post5995711 Has someone has idea bcs it seems impossible to do it now?
For TPO-range V3 set property ENUM_TPO_RANGE_MODE RangeMode = TPO_RANGE_MODE_BETWEEN_LINES(it is the only mode that you can define exact period), after that move red line to the end of period and blue line to the beginning of the period (end of period-30 days). Where is the problem in your case, what is not working?
What do you think about TPO-range V3 and TPO-v3, did you’ve compared indicators versus market delta, market scope, cluster delta or whatever you are using. Because I’ve played a bit with indicators and it seems that it has good potential. Compared to mpvl_v16 is not so precise but it is not exact since and I think it is good enough.



Quoting Beyondprice
Last question, is it possible to get the old MT4 version?
You can change executable file in metaquota directory with old version and it will work. There was explanation with archive with old file somewhere in the tread before.
  • #5,644
  • May 5, 2014 6:26am May 5, 2014 6:26am

  1. Quote
    To unsplit tpo periods:

Quote

ShowSplitProfile=false



Yes, I already did it but it didn't work. Look :


Attached Image (click to enlarge)
Click to Enlarge Name: 1.PNG Size: 72 KB




  1. Quote
    set Range mode= 0 using the vertical lines to set the boundaries to determine the length of the month profile. (blue line is from while red line is to)

​Yeah did too. I read the Mzvega's post but it doesnt work.

Attached Image (click to enlarge)
Click to Enlarge Name: screen1.PNG Size: 71 KB



In my case, I can get more days than a few days...Can't understand why. It's the same for TPO+, TPOV3, or MPVL...Even I choose Mode=0 instead of Mode=1...

Quote
For TPO-range V3 set property ENUM_TPO_RANGE_MODE RangeMode = TPO_RANGE_MODE_BETWEEN_LINES(it is the only mode that you can define exact period), after that move red line to the end of period and blue line to the beginning of the period (end of period-30 days). Where is the problem in your case, what is not working?

I don't know where is the problem

Attached Image (click to enlarge)
Click to Enlarge Name: Capture.PNG Size: 70 KB



Quote
What do you think about TPO-range V3 and TPO-v3, did you’ve compared indicators versus market delta, market scope, cluster delta or whatever you are using. Because I’ve played a bit with indicators and it seems that it has good potential. Compared to mpvl_v16 is not so precise but it is not exact since and I think it is good enough.


Well they are good. You can select volume tick or TPO and this is a very good thing. I think we are close to get good stuff. I make a comparaison between TPOV3 and Marketscope about Composite few-days (I can't select more historic as you can see) and results are the same.

About Cluster_delta, it shows Future's data, not the same. We could have Tick volume/TPO + Future's data, would be an interesting same.

TPOV3 need some modifications like X-days or X-weeks, would be perfect.


As I said, time = volume ((most of the time), so if it's impossible to get good tick-volume indicator, we should focus on composite TPO. But tick volume TPO range V3 seems fine.

I'm going to make more comparisons if I can get more days-historic for TPO_v3...

See you.
  • #5,645
  • May 5, 2014 10:45am May 5, 2014 10:45am
Quoting Beyondprice
{quote}[/i][/indent] Yes, I already did it but it didn't work. Look : {image}[list=1] {quote}[/font] ​Yeah did too. I read the Mzvega's post but it doesnt work.....

Hi Beyondprice, maybe there is a misunderstanding. When you say tpo periods it seems you mean tpo sessions. Periods are the 30minutes splitted bars while sessions are the collapsed group of bars (the session is a tpo profile). Is this what you mean? If you want unsplitted sessions (aka Asia session+London session+US session merged together) you have to set: EnableMergeProfile= true and then MergeProfile=C

Quoting Beyondprice
{quote}[/i][/indent]
set Range mode= 0 using the vertical lines to set the boundaries to determine the length of the month profile. (blue line is from while red line is to)
​Yeah did too. I read the Mzvega's post but it doesnt work......
In your attached image I can see Range mode=1 and 40000 min as the interval. Now, have you 40000 min of history in your database? If not, you cannot visualize the profile because the indicator has not the needed data to use. Then you have two possibilities:

 

  1. change the +TPO-range code and modify the line int DataPeriod = 1; to int DataPeriod = 30; Then recompile the mq4.
  2. download more 1 min data from some source

I hope this could help you. Regards

Ubi maior minor cessat
  • #5,646
  • May 5, 2014 1:03pm May 5, 2014 1:03pm
Quote
Hi Beyondprice, maybe there is a misunderstanding. When you say tpo periods it seems you mean tpo sessions. Periods are the 30minutes splitted bars while sessions are the collapsed group of bars (the session is a tpo profile). Is this what you mean? If you want unsplitted sessions (aka Asia session+London session+US session merged together) you have to set: EnableMergeProfile= true and then MergeProfile=C


Thank you, it works now.


Quote
In your attached image I can see Range mode=1 and 40000 min as the interval. Now, have you 40000 min of history in your database? If not, you cannot visualize the profile because the indicator has not the needed data to use. Then you have two possibilities:

 

  1. change the +TPO-range code and modify the line int DataPeriod = 1; to int DataPeriod = 30; Then recompile the mq4.

​


Attached Image (click to enlarge)
Click to Enlarge Name: 1.PNG Size: 60 KB



Thank you so much, it works now.

As you can see, TPO+range or TPO-v3 are fine. I get the same profile with Marketscope.
  • #5,647
  • May 5, 2014 1:41pm May 5, 2014 1:41pm
Quoting Beyondprice
{quote}[/i][/indent] Yes, I already did it but it didn't work. Look : {image}[list=1] {quote}
Quoting Beyondprice
[/font]
Quoting Beyondprice
​Yeah did too. I read the Mzvega's post but it doesnt work. {image} In my case, I can get more days than a few days...Can't understand why. It's the same for TPO+, TPOV3, or MPVL...Even I choose Mode=0 instead of Mode=1... {quote} I don't know where is the problem.
The problem in your case is that you have missing or crrupted data in M1 History. In my case in all MT4 Platforms I have corruptions or missing data somewhere. Indicator TPO+ have checkup for volume=0 and if it is calculations are interepted. I my platform I have corruption on 19.02.2014 and the indicators are not working before that period. Only for experiment I’ve interpolated a data for missing period and indi is working.


Quoting Beyondprice
{quote}[/i][/indent]{image} {quote}TPOV3 need some modifications like X-days or X-weeks, would be perfect. As I said, time = volume ((most of the time), so if it's impossible to get good tick-volume indicator, we should focus on composite TPO. But tick volume TPO range V3 seems fine. I'm going to make more comparisons if I can get more days-historic for TPO_v3... See you.


What you mean with TPOV3 X-days or X-weeks it is a tool to make Volume profiles on standard periods M1,M15,M30,h1,H4,D1,MN1 for composite profile it is supposed to use TPO_Range_V3 and can be set for whatever periods you like.
In my opinion indi is good and can be modified to become very good.
Possible modifications that that can be done (my to do list).
0. What to do with missing data in MT4 history
1. Add value area.
2. Add possibility to extend of the lines for VPOC, Hi volume nodes and value area borders to the end of the window.
3. Add possibility to increase precision/resolution of the indi, now it is calculate levels on every 1 pip for comparison +VL do that on every 0.1 pip. 1 pip is enough( my opinion) but calculation of the value area is not very good in that level resolution.
4. Try other algorithms for tick simulation (+VL have that)
5. Move most complicated calculations in external DLL too speed up indi a little bit.
6. Add possibility to draw histogram for TPO_Range_V3 on lines for begin period and end period with left and right orientations.
7. Add possibility to define periods from date to date.
  • #5,648
  • May 5, 2014 1:54pm May 5, 2014 1:54pm
Quoting Lock
{quote} Hi Beyondprice, maybe there is a misunderstanding. When you say tpo periods it seems you mean tpo sessions. Periods are the 30minutes splitted bars while sessions are the collapsed group of bars (the session is a tpo profile). Is this what you mean? If you want unsplitted sessions (aka Asia session+London session+US session merged together) you have to set: EnableMergeProfile= true and then MergeProfile=C {quote} In your attached image I can see Range mode=1 and 40000 min as the interval. Now, have you 40000 min of history in your database?...
It is good idea to check 5 and 15 min data before 30
  • #5,649
  • May 5, 2014 6:05pm May 5, 2014 6:05pm
Quote
What you mean with TPOV3 X-days or X-weeks it is a tool to make Volume profiles on standard periods M1,M15,M30,h1,H4,D1,MN1 for composite profile it is supposed to use TPO_Range_V3 and can be set for whatever periods you like.


Hello i v, I'm not sure to understand you but I didn't mean a TPOV3 dedicated to day and a TPOV3 dedicated to week.

I did want to mean that there sould be an option to set "x days or x weeks or x months" for historic like on Marketscope. It's a really friendly and helpful option.

Attached Image


Quote
0. What to do with missing data in MT4 history
Quote
1. Add value area.
2. Add possibility to extend of the lines for VPOC, Hi volume nodes and value area borders to the end of the window.
3. Add possibility to increase precision/resolution of the indi, now it is calculate levels on every 1 pip for comparison +VL do that on every 0.1 pip. 1 pip is enough( my opinion) but calculation of the value area is not very good in that...
[/font][/color]


Yes, would be great. All you wrote is possible on marketscope and it's very useful, I confirm that.

Here is parameters available on Marketscope Composite Profile :

Attached Image (click to enlarge)
Click to Enlarge Name: Capture.PNG Size: 29 KB
  • #5,650
  • May 6, 2014 3:05am May 6, 2014 3:05am
Quoting Beyondprice
{quote} Hello i v, I'm not sure to understand you but I didn't mean a TPOV3 dedicated to day and a TPOV3 dedicated to week. I did want to mean that there sould be an option to set "x days or x weeks or x months" for historic like on Marketscope. It's a really friendly and helpful option. {image} {quote}{quote}
Quoting Beyondprice
Yes, would be great. All you wrote is possible on marketscope and it's very useful, I confirm that. Here is parameters available on Marketscope Composite Profile : {image}
[/font][/color]

I mean that TPOV3 indi is to make Volume profile not composite one, i.e. with TPOV3 you are selecting range periods like m1,m5,m15,m30,h1,h4,D1,W1,MN1 all standard periods on MT4. Only thing that is missing to me is possibility to split profiles in trading sessions, i.e to make separate profile for every session. For all other cases it is supposed to use TPO-Range-V3 and is not difficult to add different types for defining a range periods like MarketScope.

I’ve checked the code of that indis and have to say that they are extremely well written, I have to thank our Russian friends for good work, but unfortunately my Russian is even worse than my English . There is a lot of hidden parameter that are not defined with extern clause and few points from “my to do list” are dropped( including performans things like add dll for calculation, that indi have amazing performance for written with mq4).

Other problem is that the indis are protected with copy rights and I don’t know is it a good idea to change indis and publish them here.


I look forward also to see the latest work of Frocus, this man also does an incredible job
  • #5,651
  • May 6, 2014 5:06am May 6, 2014 5:06am
Quote
I mean that TPOV3 indi is to make Volume profile not composite one, i.e. with TPOV3 you are selecting range periods like m1,m5,m15,m30,h1,h4,D1,W1,MN1 all standard periods on MT4. Only thing that is missing to me is possibility to split profiles in trading sessions, i.e to make separate profile for every session. For all other cases it is supposed to use TPO-Range-V3
​


Ok.

When I wrote TPO-V3, I did want to mean TPO-Range V3. You're right, I should have said TPO-RangeV3 instead of TPO-V3.

Quote
is not difficult to add different types for defining a range periods like MarketScope.

OK, it's probably better to send a mail to Russian's coder of fxcoder because of copyright. I'll ask them if it's possible to add this option and the others u just suggested.
  • #5,652
  • May 6, 2014 5:08am May 6, 2014 5:08am
Yes, Frocus is working too on it, it'll be good work. No doubt about that too.

The most important is that we have quality's tools to work with now.
  • #5,653
  • May 6, 2014 6:27am May 6, 2014 6:27am
Quoting Beyondprice
{quote}​ Ok. When I wrote TPO-V3, I did want to mean TPO-Range V3. You're right, I should have said TPO-RangeV3 instead of TPO-V3. {quote} OK, it's probably better to send a mail to Russian's coder of fxcoder because of copyright. I'll ask them if it's possible to add this option and the others u just suggested.
If you are familiar enough with writing Russian to ask them for little modifications it will be great, it will be piece of cake for them(having in mind the quality of the last version of indi, it is very professional work b.t.w). Having Frocous indicator (which will become better I hope)+ TPO+ indi I can say that I already have almost everything to trade forex (and whatever I want) on MT4 platform on manner that I like.
Have a good trading! Today is good trending day for a lot of pairs with very good opportunities, will see how will proceed in NY session.
  • #5,654
  • May 6, 2014 8:21am May 6, 2014 8:21am
I'm going to write in English. I think they understand.


Quote
I can say that I already have almost everything to trade forex (and whatever I want) on MT4 platform on manner that I like.
​

Yes.

Attached Image (click to enlarge)
Click to Enlarge Name: 1.PNG Size: 91 KB


Now, I have exactly the same on MT4 and Marketscope.

Quote
Today is good trending day for a lot of pairs with very good opportunities

I hate trending days. I lost 100 dollars today
  • #5,655
  • May 6, 2014 10:16am May 6, 2014 10:16am
I'm asking : Why is it impossible to put the same indicator twice?

I'd like to have two TPO_RangeV3 instead of +VL.

Thank you.
  • #5,656
  • May 6, 2014 11:24am May 6, 2014 11:24am
Quoting Beyondprice
I'm asking : Why is it impossible to put the same indicator twice? I'd like to have two TPO_RangeV3 instead of +VL. Thank you.
Actually you can change 2 TPO_Range_V3 parameter Id = "+tpor" to be different for each indi as example Id = "+tpor_01" for the firs Id = "+tpor_02" for second and so on… . You can have many instance of the indi.
  • #5,657
  • May 6, 2014 12:10pm May 6, 2014 12:10pm
Thank you i_V. Works now.
  • #5,658
  • May 6, 2014 12:27pm May 6, 2014 12:27pm
Attached Image (click to enlarge)
Click to Enlarge Name: 1.PNG Size: 61 KB


Attached File(s)
File Type: ex4 riv_SmartProfile1.04.ex4   217 KB | 1,560 downloads
Attached File(s)
File Type: ex4 +TPO.ex4   39 KB | 1,441 downloads
Attached File(s)
File Type: ex4 +TPO-Range.ex4   45 KB | 1,506 downloads
Attached File(s)
File Type: ex4 ay-TPOChart-Session.v1.20-LOCK-start0.ex4   57 KB | 1,459 downloads
Attached File(s)
File Type: mq4 ay-TPOChart-Session.v1.20-LOCK-start0.mq4   25 KB | 1,628 downloads
Attached File(s)
File Type: ex4 ClusterDelta_VolumeProfile.ex4   14 KB | 1,911 downloads
Attached File(s)
File Type: ex4 riv_ay-MarketProfileDWM.v131-2.ex4   55 KB | 1,495 downloads
Attachment
Attached File(s)
File Type: ex4 TPO-Range-v3.ex4   40 KB | 1,185 downloads
Attachment

So, I've found what I was looking for MT4.

Now, I can trade 100% on MT4 new broker's plateform.

Thanks to all of you.

Some ressources :

https://www.mirusfutures.com/futures...inars/archives

http://traderkingdom.com/market-prof...hived-webinars

http://alexandertrading.com/wp/category/public-post/

http://www.amsterdamtrader.com/

Thank you again.

See you soon



EDIT : As you know, I'm not a MT4-expert. Don't know if you could use indics I uploaded.

You can juste google the indic's name if it doesn't work.
  • #5,659
  • May 7, 2014 3:30am May 7, 2014 3:30am
Hello,

resistenza fx :
Attached Image (click to enlarge)
Click to Enlarge Name: Captureresistance.JPG Size: 88 KB


Attached File(s)
File Type: zip resistenza_fx.zip   161 KB | 1,689 downloads
  • #5,660
  • May 7, 2014 12:55pm May 7, 2014 12:55pm
Thank you dxxk.


I've just taken a long position on Silver.

Attached Image (click to enlarge)
Click to Enlarge Name: 1.PNG Size: 126 KB
7 traders viewing now