THV system, final edition

In this case, it should give you an alert when the score adds up to three or the score adds up to four, and this may or may not be connected to the third and fourth light - for example the score can be three when rows 1, 2 and four are all green or all red and row 3 is missing from it.

The last score refers to the last score previous to the alert being given, not the last alert score. For example the last alert score may have been when three lights were green. Then the SAH may have then dropped to 2 green and 2 red, then gone to all four green. The current score when the alarm is given in that case would be four, but the last score would be 2, not the previous alarm score of three.

I'm giving up on FXDD, too many spikes without a news release in sight.
Also, after January of this year, they increased all their spreads.

Now the question-- where to move my account.
Any recommendations ??

This is most probally the wrong thread to ask the above question but I use GoMarkets they are based in Australia with servers all over the world.

I think they are great because they have one of the lowest spread for eur/usd

The only time people complain about them is around major news events. I don't trade the news events so I have never had a problem with them.


They have an active thread on FF and the people who work for GoMarkets visit it daily to answer any question. If you have any questions please ask them in the thread below.
http://www.forexfactory.com/showthread.php?t=201161

thank you, for sharing your system.. i think its good. i will try. wish me luck.

MissPips , thanks you , that's as I thought.
all the types seem to have a comprehensive explanation except
0 slow trix.... ..seems to be the color
1 fast trix ,,,,,..again seems to be the color
5 cloud ...........not quite sure ,,, could be above or below the cloud
6 Heiken Aishi,, seems to be the color of the candles
13 coral ..........seems to be the price above or below
I dont use many of the indicators that are provided for, but will try and test them.
Its working quite nicely at the moment,,
Had a situation this am when the explanation on the far right of the SAH , (those 4 lines) were repeated at the end of the lights,, I reloaded the SAH and its fine now,, if it happens again I'll save a screen view.

thanks very much

Mike

did anyone make a backtest of this system or forward test?
is it profitable? thanks

THV and the SAH isn't an EA that you can back test. Forward testing; many people have posted their positive results. If you want to back test it just use your eyes on a live chart and look at the past. Here is the last valid trade the SAH found using the settings I use. THV has different rules. I believe the most profitable traders using this system take what they like from it and design their own hybrid version. In my case Miss Pips SAH versions is my favourite.

Thanks you for reply, looks interesting

What indicator is on top of the trix? Also I loaded the sah and don't see the info on right side telling you what each row is showing....sah version 4.64
Any ideas?
found the info for sah....just chart shift over a little. can you close the gap from sah to info tag??

has any EA coded for thıs system.

walker

h_shift param

Thanks MissPips...any idea what indicator is on the trix from neild's post?

The indicator on top of the trix is a paid indicator pipware by stratman, I did not include it in my template I posted for exking because you have to pay the owner for it.

Miss pips SAH works fine on its own with the THV trix you don't need the paid indicator I have, I just use it because sometimes a few hours later the SAH may give another alert, I use Pipware to see if I want to trade the alert or just ignore it.

Thanks for the quick response and info.

Hi MissPips,
I installed the SAH over the last weekend and have been using it this week ,, great.
I have installed the SAH on 1 pair with the rest of THV, set the parameters in the SAH inputs , then saved the setup as a template.
Then I have loaded the template onto other pairs, the pairs I'm using are ,, EURYEN,EURUSD, GBPUSD.
Sometimes the writing on the SAH replicates itself to the right,,
I attach a copy of what I'm getting, don't know if this is an mt4 problem or not.
I am trying to include a screen copy of EURYEN,, you can see the writing to the left of the correct writing , and it is displaying the info from the GBPUSD chart, its not a major , but it would be nice to get rid of the unnecessary GbPUSD. bits, any ideas or do we go the mt4 .
Warm regards
Mike

Ok, it seems to be picking up the objects saved in your template when you created it on another pair.

I"ll release a fix for it when I get some time. Meanwhile you can just go into the objects list and delete all the objects named FF_, and then they will come back correctly.

Thank MissPips,,
done,
Mike

Hi All,
Here is a new version of the SAH.

Changes:
New etypes 45-50.
Fixed duplicate label issue (I hope)
Removed all modes besides mode 1. Since there are now timeframes 0 and -1 to -4 the other modes are redundant. You can now use mode1 to auto configure timeframes for any of the indies, not just the trix.

Removed Autotimeframe and currenttf params for same reason.

Internally recoded some stuff so the exe file is smaller, and hopefully runs faster.



If you have a bug to report or questions about something that is not properly explained in the documentation, I will be happy to answer them and I will try to improve the code/documentation for next time. However please do not PM or post me with questions just because the documentation looks too long and complicated to read or because you haven't completed the prerequisites. The reason the documentation is long and there are many prerequisites is because I have added many indicators/options that people have requested, and if I spend my time answering questions that have already been answered then I have less time to do that.

Prerequisites: Please make sure that you have downloaded all the helper indies and history for the timeframes you intend to use or your mt4 version may hang. You can get them here:
http://www.forexfactory.com/showthre...10#post4788110


In addition, before you ask me any questions about the email not working, please make sure that you can demonstrate that your mt4 is properly configured to send email by showing that a test email is working.


Modes:


EperiodTypes:
=====

Type 0 - slow trix . Green when fast trix is sloping up, red when it is sloping down

Type 1 - fast trix
Green when slow trix is sloping up, red when it is sloping down.

Type 2 - stochs
For type 2 (stochastics) you can set each row to use a different stochastic. Use Stochsignal for row1 , secondstochsignal for
row2, thirdstochsignal for row 3,fourthstochsignal for row 4etc.)

Type 3 - Thv classic mode
(fast trix above slow trix and fast trix above 0 and fast trix green or the opposite for short)

Type 4 - semiclasic (fast trix above/below slow trix i.e trix cross but not necessarily above zero, and fast trix still in
direction of trade)

Type 5 - cloud. Green when price is above Ichimoku cloud, red when it is below it.

Type 6 - HeikenAishi. Green when HA bars are greeb, red when they are red.

Type 7 - TDI (traders dynamic index) + Market sentiment (TDI yellow line) increasing or decreasing for red or green

Type 8 - AboveBelow0 (fast trix above 0 and fast trix green - or the opposite for short)

Type 9 - AboveBelow Tenkan (Price above/below Tenkan) (Uses second cloud settings)

Type 10 -Above/Below Kijjun (Price above/below Kijjun ) (Uses second cloud settings)

Type 11 - Above/Below Tenkan && Kijun"; (Price above/below Tenkan & Kijjun ) (Uses second cloud settings)

Type 12 - Trix Hist (shows whether the distance between the fast and slow trix is increasing or decreasing in the direction
of
the trade)

Type 13 -Coral. Green when price is above coral, red when it is below it.

Type 14- Divergence - Catches the divergence arrows show by the Trix on the higher timeframes. Note that divergence arrows do
not appear in realtime - it takes a least two bars for the trix to catch it, and it is also not always right. So it's better
to catch it manually yourself, but if you missed it this will give you a heads up.

Type 15 - Both fast and slow trix. Red means both fast and slow trix are red, green means both fast and slow trix are green,
empty means one is grean and the other is red.

Type 16 - The angle of the stochastic signal line. Red means the line is sloping down green means it is sloping up
(regardless of whether there has been a cross or not)
.
Type 17 - Same as type 16 but the signal line is greater than 20 and less than 80.

Type 18 - Chop signal based on the TDI. Red when price is below the TDI 5 period high and low smoothed channel, green when
price is above it, empty when price is inside the channel.

Type 19 - All ThV. Green when price is above coral and cloud and both trix lines are green, red when price is below coral and
cloud and both trix lines are red. However trix does not have to be crossed in the direction of the slope.

Type 20 -All ThV Plus Trix Cross Same as type 19 but in addition trix must be crossed in the direction of the slope.

Type 21 - Green when price is above Coral and Cloud, and Slow Trix is green, Red when price is below Coral and Cloud, and
Slow Trix is red, empty when none of the above

Type 22 - Green when price is above Coral and Cloud, and Fast trix is green, Red when price is below Coral and Cloud, and
Fast trix is red, empty when none of the above.

Type 23 - All Guppy MMAs are sloping the same direction. Green sloping up, red sloping down

Type 24 - All Guppy MMAs are sloping the same direction, and also in order ( i.e, 3 above 5, 5 above 8 etc, or vice versa)

Type 25 - Three specified MAs have crossed and specified stochastics poining in same direction. (Uses MACrossMA1 etc)

Type 26 - Three specified MAs have crossed and are above the Coral.(Uses MACrossMA1 etc)

Type 27 - Fast trix, slow trix and trix histogram all the same color

Type 28 - Treads ADX setup: Green when PlusDI above MinusDI, Plus DI increasing, PlusDI above specified value, ADX above
specified value, ADX increasing or red when vice versa Note that ADX , PlusDI and Minus DI price mode values are as follows:
PRICE_CLOSE 0 Close price.
PRICE_OPEN 1 Open price.
PRICE_HIGH 2 High price.
PRICE_LOW 3 Low price.
PRICE_MEDIAN 4 Median price, (high+low)/2.
PRICE_TYPICAL 5 Typical price, (high+low+close)/3.
PRICE_WEIGHTED 6 Weighted close price, (high+low+close+close)/4
This is different from the MTFADX indie Tread released, which uses the high price for all three by default (an error in my
opinion because it seems to scew things to the positve side, but you can choose what you like). If you dont care whether the
ADX is above a certain value, just that it be increasing set ADXMinVal to 0. Likewise if you don't care if the DI value is
above a particular level, just that it be increasing set DIMinVal to 0.

Type 29 - Ignores whether the ADX is increasing. Just checks whether ADX is above the specified value, whether DI is above
the specified value and whether DI is increasing.

Type 30 - Using the params firstlowertype 30 and firsthigher type30, seccondlowertype20 and secondhighertype30 you can check
whether the PlusDI on a lower tf is higher than PlusDI on a higher tf and MinusDI on a lower tf is lower than MinusDI on a
higher TF and ADX is rising ( and vice versa of course).
Green when PlusDI> PlusDIHTF && MinusDI<MinusDIHTF && PlusDI> PlusDIPrev && ADX >ADXPrev
Red when MinusDI>MinusDIHTF && PlusDI< PlusDIHTF && MinusDI>MinusDIPrev && ADX >ADXPrev

Type 31 4 Mas in order and expanding shows you when the four selected mas are in order and when the distance between the
first and second is expanding (Uses MACrossMA1 etc)

Type 32 -4 Mas in order and narrow- Red when 4 MAs in order, MA1 below MA2, MA2 below MA3,MA3 below MA4 and the distance
between MA1 and MA4 for the
current bar is less than the specified channel. Vice versa for green (Uses MACrossMA1 etc nd ChannelWidth)

Type 33 - 3 MAs in order (instead of four)
Same as type 26 except uses 3 MAs without checking if they are above or below the coral
Red when all MAs in order - MA1 below MA2, MA2 below MA3. Vice versa for green.

Type 34 - 3MAs narrow&expanding
Same as type 33 except also checks if the distance between MA 1 and 3 is less than the value specified in Channel and is
expanding.
Red when all MAs in order, MA1 below MA2, MA2 below MA3,and the distance between MA1 and MA3 for the current bar is less than
the specified channel and the distance between MA1 and MA3 for the current bar is greater than for the previous bar. Vice
versa for green.

Type 35 - DI& min vals
Red when minus DI is above plus DI and greater than DI min val and ADX is greater than ADX min val. Vice versa for green.

Type 36 -3MAs narrow
Same as type 34 but doesnt check if the mas are expanding.
Red when all MAs in order, MA1 below MA2, MA2 below MA3 and the distance between MA1 and MA3 for the current bar is less than
the specified channel. Vice versa for green.

Type 37 - Ha Candles above/below Coral and cloud. Red when HA candles are below both Coral and
cloud, green when HA candles are above both coral and cloud, blank when both conditions are not met.

Type 38 - TDI band breakout. Green when the TDI green line breaks out of the blue bands to the upside, red when it breaks out
of the bands to the downside

Type 39 - Like type 7 but ignores whether market sentiment (TDI yellow line) is rising or falling. This is the original
Synergy signal - 7 was a modification of it

Type 40 - TDI band squeeze. Green when distance between blue bands is less than BBSqueezelimit param and TradeSignalLine2 is
above market sentiment, red when it is below it.


Type 41 - Slow trix above/below 0. Red when slow trix is below 0, green when it is above it, with out regard to the slope of
the trix


Type 42 - Slow trix above/below 0 and sloping up/down. Red when slow trix is below 0 and sloping down, green when it is above
it and sloping down, blank when both conditions are not met.

Type 43 - TDI green band is above Market baseline. Green when the TDI green line is above the market baseline (yellow line)
red when it is below it, without regard for whether it is also above/below the red line.

Type 44. All THV plus OB/OS. Like type 19 except signal is not given if the fast trix is in overbought or oversold. (Uses TrixxxOB and TrixxxOS params where xx is a timeframe like M1 M15 etc)


Type 45 - TDI RSI A/b Market baseline BB expanding. Green when the TDI green line is above the yellow line and the blue bands are expanding, red when it is below it and the blue bands are expanding

Type 46 - Trix, cloud, coral, TDI yellowband, stochs. Green when price is above the cloud and coral and the TDI yellowband and stochastics are rising. Red when price is below the cloud and coral and the TDI yellowband and stochastics are falling.

Type 47 -TDI Fan squeeze. Green when the slope of the TDI green, red and second market baseline are increasing , green is above red, red is above the second market baseline, the green line is above the yellow line and the blue lines are expanding.

Red when the slope of the TDI green, red and second market baseline are decreasing , green is below red, red is below the second market baseline, the green line is below the yellow line and the blue lines are expanding.

Type 48 - Green when ATR is increasing and plusDI is greater than minusDI. Red when ATR is increasing and minusDI is greater than plusDI.

Type 49 - Green when ATR is increasing and price is above the cloud. Red when ATR is increasing below the cloud.

Type 50 - Trix Cross. Green when fast trix is above slow trix, red when it is below it.

Note: The useHACandles param affects type 5, 9,10,11,13 19, 20,21,22, 25 and 44.

When true, the ePeriod types that compare where price is in relation to something such as the Ichimoku cloud or the Coral
compares the close of the HA candle instead of the regular close.


Configuring auto timeframes
===========

If you want to autoconfigure timeframes using mode one, you can use the following settings
in eperiod:

0 : current tf
- 1 : up one tf
-2 : up two tfs
-3 : up three tfs.
-4 : up four tfs
That is, if you are on a one min chart and you set ePeriod to -1 you will see data for the 5 m chart. For -4 on a 1 m chart you will see data from the 60 m chart.

Alarm
===========
The way it works is that for each row in the histo you can choose whether to count the row in the max score by setting
countE1-4 to true. Then you set a Max score. When EnableAlerts is true, you will get an alarm when the total score is greater
than or equal to the Max
score.
For example:
Suppose I have the following settings.
row 1 is the 1m f trix
row2 is the 1 m coral
row 3 is the 1m cloud
row 4 is the 5m fast trix.
If I want to get an alarm when all four rows are the same colour I set countE1-4 to true and max score to 4.
If I want to get an alarm when 3 of the four are true I set countE1-4 to true and max score to 3. In this case when any three
of the rows are the same color you will get an alarm. (You will also get an alarm once when the fourth row turns color as
well)
If I want to get an alarm when only the first, second and third rows are true I set countE1, countE2 and countE3 to true,
countE2 and countE4 to false and max score to 3.
In addition the score for each row is reset if the histo row changes color.
So if you have an alarm on the first,second and third rows, and max score set to 3, when all three change to the same color
(green for example) you will get an alarm. If the second row changes color (to red for example) but the first and third rows
stay green, when the second row changes back to green you will get another alarm.
You will get the alarm at the start of the next bar following the bar in which the total score was greater than or equal to
maxscore.

EmailAlert: Set to true if you want to get email alerts. EnableAlerts should also be set to true and it would be best to
leave AlertMode type as 0 (alert on newbar when last bar has closed with a signal) rather than 1 (interbar)

Dear THV fans

I have received some emails saying thanks for the introduction of the method.
That means a lot for me, I am happy that some traders could be a better trader cause of THV.
I’m still alive but not a real internet person anymore, life is so short and it is so important to spend the few time left beside of trading and working in other biz with the ones that love you before they (or me) die.
Thank you all again, especially MissPips, I am sure that you will be fine making your THV homework.

Yes, we did thousands.

Second question: depends on how you develope your feeling of the market.