THV system, final edition

Ok, found it.

Thank you very much. I was following this thread time ago but too many updates. Now it is time to resume since I see it simplified and definitely stable.
I'll begin to give it another try being confident on your and other's good results, and on my enhanced experience.

The only difficulty I see will be to find good market volume data. Anyway the whole system should be enough for trading.

Once again many thanks and many pips to you.

Hey Bishop, can u post a chart and explain short how you trade this new version?

hi everyone!
I am useing the indi TzPivotsD, and I saw MR1 MS1 R1 S1 lines.I know they show the resistance and support.

Could anyone tell me what is the difference between the MR and R (MS and S)? Thanks!

Hi bishop, good trade records
i hav followed this thread hals a year, still not confident in taking trade

M means Mid-point

MS1 is mid-point between FPV and S1
MS2 is mid-point between S1 and S2
...........and so on......

Thanks very much for such immediate reply!

Hi All
I was trying install indicators from post no 1, but I have got some arror while installing. Do you have any zipped version of indicators and templates? I will put manually to catalogs...

Thanks
Heops

Hi peeps,
I took some quick trades early this morning on eurchf & eurgbp. Got out qucikly bcos it was overbought. I am back in eurusd sell. I am gonna ride this till the trend ends. eurusd sell @ 1.43307.

Watchout on eurchf. The next bar on M30 looks like a good entry for a sell.

Have a greatday.

Hey Bishop congrats. What TF are u trading??

I check for entry setup on M30. I dont trade against H1. I get out of trades as soon as i notice reversals. I ride the trend if H1 fast, H1 slow and H4 fast all support the trend direction.

I enter trades with sell limit & buy limit.

Experience & good timing is key.

Hi, Bishop, how do you define trend reversals?

I noticed that possible trend change can only be observe from lower time frame.
Am i correct?

anyone can help me please ????

summary already in the zip file--->user manual.
Try to play with this system first in DEMO. Go through this thread from page 1 to 300 should be enough to understand this system. Just the first few 10 pages may consider not relevant to THV 4, but the trading concept almost the same.

For those who wish to save this thread and read it offline, " httrack " is a program that can help you.

Hello all

can you someone please help me Im looking for a Trix MTF inidctaor that has the overbought and oversold lines in it like the standrad trix indicator, can someone point me in the right direction or attach it please

many thanks

Hi all,

Here is a new version of the SAH. It has a couple of new types related to the TDI, and mainly, the ability to send email alerts.

I have received a lot of requests for this so I am adding it. I don't use this myself, but I have tested it to make sure it works. You will have to configure your MT4 to send emails in the Tools->Options->Emails tab in order to use this new feature.

IF you have any problems with it, please make sure you attach a screenshot of your MT4 journal tab showing a message that it has sent a test email successfully. Please do not PM me asking for help with problems with this feature unless you have successfully configured your MT4 email option and please do not PM me asking for help configuring your email.

(Anticipation of a large number of such requests is the main reason I haven't added this feature before, and I am going to ignore anybody who does this.)

If you downloaded previous versons, you will need to download the new TDI indie for the TDI related types to work in this version. If you've never downloaded the SAH please download and compile the helper indies.

Mode 1:
=====
Mode 1 looks at ePeriod Type, which can be the following
types:

Type 0 - slow trix

Type 1 - fast trix

Type 2 - stochs
For type 2 (stochastics) you can set each row to use a different stochastic. Use Stochsignal for row1 , secondstochsignal for
row2, thirdstochsignal for row 3,fourthstochsignal for row 4etc.)

Type 3 - Thv classic mode
(fast trix above slow trix and fast trix above 0 and fast trix green or the opposite for short)

Type 4 - semiclasic (fast trix above/below slow trix i.e trix cross but not necessarily above zero, and fast trix still in
direction of trade)

Type 5 - cloud


Type 6 - HeikenAishi;

Type 7 - TDI (traders dynamic index) + Market sentiment (TDI yellow line) increasing or decreasing for red or green

Type 8 - AboveBelow0 (fast trix above 0 and fast trix green - or the opposite for short)

Type 9 - AboveBelow Tenkan (Price above/below Tenkan)

Type 10 -Above/Below Kijjun (Price above/below Kijjun )

Type 11 - Above/Below Tenkan && Kijun"; (Price above/below Tenkan & Kijjun )

Type 12 - Trix Hist (shows whether the distance between the fast and slow trix is increasing or decreasing in the direction of
the trade)

Type 13 -Coral

Type 14- Divergence - Catches the divergence arrows show by the Trix on the higher timeframes. Note that divergence arrows do
not appear in realtime - it takes a least two bars for the trix to catch it, and it is also not always right. So it's better
to catch it manually yourself, but if you missed it this will give you a heads up.

Type 15 - Both fast and slow trix. Red means both fast and slow trix are red, green means both fast and slow trix are green,
empty means one is grean and the other is red.

Type 16 - The angle of the stochastic signal line. Red means the line is sloping down green means it is sloping up
(regardless of whether there has been a cross or not).

Type 17 - Same as type 16 but the signal line is greater than 20 and less than 80.

Type 18 - Chop signal based on the TDI. Red when price is below the TDI 5 period high and low smoothed channel, green when
price is above it, empty when price is inside the channel.

Type 19 - All ThV. Green when price is above coral and cloud and both trix lines are green, red when price is below coral and
cloud and both trix lines are red. However trix does not have to be crossed in the direction of the slope.

Type 20 -All ThV Plus Trix Cross Same as type 19 but in addition trix must be crossed in the direction of the slope.

Type 21 - Green when price is above Coral and Cloud, and Slow Trix is green, Red when price is below Coral and Cloud, and
Slow Trix is red, empty when none of the above

Type 22 - Green when price is above Coral and Cloud, and Fast trix is green, Red when price is below Coral and Cloud, and
Fast trix is red, empty when none of the above.

Type 23 - All Guppy MMAs are sloping the same direction. Green sloping up, red sloping down

Type 24 - All Guppy MMAs are sloping the same direction, and also in order ( i.e, 3 above 5, 5 above 8 etc, or vice versa)

Type 25 - Three specified MAs have crossed and specified stochastics poining in same direction.

Type 26 - Three specified MAs have crossed and are above the Coral.

Type 27 - Fast trix, slow trix and trix histogram all the same color

Type 28 - Treads ADX setup: Green when PlusDI above MinusDI, Plus DI increasing, PlusDI above specified value, ADX above
specified value, ADX increasing or red when vice versa Note that ADX , PlusDI and Minus DI price mode values are as follows:
PRICE_CLOSE 0 Close price.
PRICE_OPEN 1 Open price.
PRICE_HIGH 2 High price.
PRICE_LOW 3 Low price.
PRICE_MEDIAN 4 Median price, (high+low)/2.
PRICE_TYPICAL 5 Typical price, (high+low+close)/3.
PRICE_WEIGHTED 6 Weighted close price, (high+low+close+close)/4
This is different from the MTFADX indie Tread released, which uses the high price for all three by default (an error in my
opinion because it seems to scew things to the positve side, but you can choose what you like). If you dont care whether the
ADX is above a certain value, just that it be increasing set ADXMinVal to 0. Likewise if you don't care if the DI value is
above a particular level, just that it be increasing set DIMinVal to 0.

Type 29 - Ignores whether the ADX is increasing. Just checks whether ADX is above the specified value, whether DI is above
the specified value and whether DI is increasing.

Type 30 - Using the params firstlowertype 30 and firsthigher type30, seccondlowertype20 and secondhighertype30 you can check
whether the PlusDI on a lower tf is higher than PlusDI on a higher tf and MinusDI on a lower tf is lower than MinusDI on a
higher TF and ADX is rising ( and vice versa of course).
Green when PlusDI> PlusDIHTF && MinusDI<MinusDIHTF && PlusDI> PlusDIPrev && ADX >ADXPrev
Red when MinusDI>MinusDIHTF && PlusDI< PlusDIHTF && MinusDI>MinusDIPrev && ADX >ADXPrev

Type 31 4 Mas in order and expanding shows you when the four selected mas are in order and when the distance between the first and second is expanding

Type 32 -4 Mas in order and narrow- Red when 4 MAs in order, MA1 below MA2, MA2 below MA3,MA3 below MA4 and the distance between MA1 and MA4 for the
current bar is less than the specified channel. Vice versa for green

Type 33 - 3 MAs in order (instead of four)
Same as type 26 except uses 3 MAs without checking if they are above or below the coral
Red when all MAs in order - MA1 below MA2, MA2 below MA3. Vice versa for green.

Type 34 - 3MAs narrow&expanding
Same as type 33 except also checks if the distance between MA 1 and 3 is less than the value specified in Channel and is
expanding.
Red when all MAs in order, MA1 below MA2, MA2 below MA3,and the distance between MA1 and MA3 for the current bar is less than
the specified channel and the distance between MA1 and MA3 for the current bar is greater than for the previous bar. Vice
versa for green.

Type 35 - DI& min vals
Red when minus DI is above plus DI and greater than DI min val and ADX is greater than ADX min val. Vice versa for green.

Type 36 -3MAs narrow
Same as type 34 but doesnt check if the mas are expanding.
Red when all MAs in order, MA1 below MA2, MA2 below MA3 and the distance between MA1 and MA3 for the current bar is less than
the specified channel. Vice versa for green.

Type 37 - This is a duplicate of type 32 and has a bug. For future use

New Types:

Type 38 - TDI band breakout. Green when the TDI green line breaks out of the blue bands to the upside, red when it breaks out of the bands to the downside

Type 39 - Like type 7 but ignores whether market sentiment (TDI yellow line) is rising or falling. This is the original Synergy signal - 7 was a modification of it

Type 40 - TDI band squeeze. Green when distance between blue bands is less than BBSqueezelimit param and TradeSignalLine2 is above market sentiment, red when it is below it.




Mode 2
======
Mode 2 ignores eperiod type and sets all tfs to demi classic mode (fast trix above/below slow and above/below zero, but may have changed color against the trade.
Mode 3
======
Mode 3 ignores all ePeriod types and sets all selected tfs to classic (fast trix/above below slow and still in direction of the trade and above/below zero)
Mode 4
======
Mode 4 ignores all ePeriod types and sets all selected tfs to semiclassic (fast trix/above below slow and still in direction of the trade but not necessarily above/below zero)


Autotimeframe
===========

When autotf is true, the indicator works like the old trix histo, selecting the next second and third higher timeframes for
the fast and slow trix (i.e on a one minute chart, 5m f & s and 15m f & s trix).
If use autotf and usesecondautotf are both true, then it selects the fourth and fifth higher tfs for the fast and slow trix.
(i.e on a one minute chart 30m f & s and 60m f & s trix)


Currenttf
===========
When true, ignores the eperiod and uses tf 0, or the current chart.

Alarm
===========
The way it works is that for each row in the histo you can choose whether to count the row in the max score by setting
countE1-4 to true. Then you set a Max score. You will get an alarm when the total score is greater than or equal to the Max
score.
For example:
Suppose I have the following settings.
row 1 is the 1m f trix
row2 is the 1 m coral
row 3 is the 1m cloud
row 4 is the 5m fast trix.
If I want to get an alarm when all four rows are the same colour I set countE1-4 to true and max score to 4.
If I want to get an alarm when 3 of the four are true I set countE1-4 to true and max score to 3. In this case when any three
of the rows are the same color you will get an alarm. (You will also get an alarm once when the fourth row turns color as
well)
If I want to get an alarm when only the first, second and third rows are true I set countE1, countE2 and countE3 to true,
countE2 and countE4 to false and max score to 3.
In addition the score for each row is reset if the histo row changes color.
So if you have an alarm on the first,second and third rows, and max score set to 3, when all three change to the same color
(green for example) you will get an alarm. If the second row changes color (to red for example) but the first and third rows
stay green, when the second row changes back to green you will get another alarm.
You will get the alarm at the start of the next bar following the bar in which the total score was greater than or equal to
maxscore.


New Param
EmailAlert: Set to true if you want to get email alerts. EnableAlerts should also be set to true and it would be best to leave AlertMode type as 0 (alert on newbar when last bar has closed with a signal) rather than 1 (interbar)

Yeah you are right. It is quicker to spot reversals on lower TFs.

Here you go

Hi all,

I've made another small change to the SAH. I added a param called useHACandles.

When true, the ePeriod types that compare where price is in relation to something such as the Ichimoku cloud or the Coral compares the close of the HA candle instead of the regular close. The affected types are 5, 9,10,11,13 19, 20,21,22 and 25. If you have never downloaded the SAH before, please download the helper indies from the post quoted below