Rsi cross indicator? (NOT cross 50, etc) | Page 2 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Need small modification on my RSI cross/touch RSI alert 0 replies

RSI cross indicator when rsi=50 19 replies

Please help! Arrow rsi 8 cross 55-45 indicator! 5 replies

Need RSI/MA Cross Indicator 0 replies

Merc's special Fibonacci trading,in combo w/QQE Gann etc.etc. 7 replies

Attachments: Rsi cross indicator? (NOT cross 50, etc)
Exit Attachments

Rsi cross indicator? (NOT cross 50, etc)

  • #21
  • Dec 30, 2009 10:17am Dec 30, 2009 10:17am
hey mark..... sorry, i forgot to post back..... i wrote it but as feared it was highly unreliable.... the reason being, your using ticks from one pair to draw indicators , rsi(2), of 2 other pairs on a minute chart of the 3rd pair.....

now that's ok on higher timeframes, and possibly ok during very active hours on low timeframes, but sooner or later the absence of ticks will cause the buffers to miss.... which results in incorrect signals.....h
to trade and code, keep both simple... no call to impress....h
  • #22
  • Dec 30, 2009 10:22am Dec 30, 2009 10:22am
hey blackfeet..... sure, will do..... my experience seems to show that the crossing of 2 ma's of the rsi() is more reliable than a single ma.....

i'll write both versions and you can check.....h
to trade and code, keep both simple... no call to impress....h
  • #23
  • Dec 30, 2009 11:15am Dec 30, 2009 11:15am
Hayseed, thanks a lot. I look forward to getting the indicator.

RebelHeart,
You'll easily get my trading system through the picture herejoined.

In fact, I MISSED the 16:50 trade (... no indi to warn me and wake me up !) but I took the 17:55 (less good but ... fine enough).

I wait for a cross of RSI(21) and the 21EMA of the RSI. Macd & CCI are confirmation signals.

Hope you'll enjoy. Don't hesitate to comment.

Best regards

BBF
Attached Image (click to enlarge)
Click to Enlarge Name: FF_RSI_Cross_GBPJPY.jpg Size: 267 KB
BigBlackfeet Always on the(forex) war path !
  • #24
  • Dec 30, 2009 11:16am Dec 30, 2009 11:16am
Good morning Hayseed,
Would you please post the indicator?
I understand your concern and that is why the indy has to be used in conjunction with intermarket relationships and parallel/inverse correlation.
Thanks,
Mark
[email protected]
  • #25
  • Dec 30, 2009 1:29pm Dec 30, 2009 1:29pm
hey blackfeet..... here ya go.... the chart version plots the arrows on the chart at a finished bar..... the other one plots in a separate window.....

an example of my concern in reguards to a single ma comes to life on december 22 on the inclosed chart.... that single ma is going to whack us around like a steel toed boot in a cheap maytag dryer......

but it sounds like you have that possibility under control..... holler back if anything else comes to mind......h

//--

hey mark.... i'll have to rewrite that other indicator, appears i deleted it..... will post it today.....h
Attached Image (click to enlarge)
Click to Enlarge Name: blackfeet.gif Size: 23 KB
Attached File(s)
File Type: mq4 Rsi BlackFeet.mq4   3 KB | 2,694 downloads
File Type: mq4 Rsi BlackFeet on chart.mq4   4 KB | 2,689 downloads
to trade and code, keep both simple... no call to impress....h
  • #26
  • Edited 9:35pm Dec 30, 2009 8:01pm | Edited 9:35pm
hey mark.... here ya go.... rsi periods is adjustable per pair.... they can be differing values if need be.... the pairs are adjustable.....

please keep in mind, with small periods, rsi(2) and minute timeframes it is unreliable during periods of low activity.... it's tick dependent....h
Attached File(s)
File Type: mq4 Mark RSI.mq4   4 KB | 2,401 downloads
to trade and code, keep both simple... no call to impress....h
  • #27
  • Dec 30, 2009 8:10pm Dec 30, 2009 8:10pm
Hayseed,
Thanks and I'll try it tonight!
I understand and respect your concerns.
As a BETTER closing option for a working EA, with source code and created for me, are you willing to implement the addition?
The EA changes would have to be handled privately.
Sincerely,
Mark
[email protected]
  • #28
  • Dec 30, 2009 8:24pm Dec 30, 2009 8:24pm
Hayseed,
Did I lose the audio alert and arrow?
The audio alert is the most important!
Sorry,
Mark
  • #29
  • Dec 30, 2009 8:54pm Dec 30, 2009 8:54pm
Hayseed,

I like what you have done with the rsi indicators and you gave me some new ideas for things that i am working on.

I modded your blackfeet rsi to have the arrows on the chart and the indicator window at the same time.

personally, i tend to put arrows on the chart based on conditions from the subwindows. It took me a while to figure out how to do it a year ago but once I did it made life easier. i use the createobject function as you can see in the code.

i left the subwindow arrows on it so you an see that they line up. They can be deleted from the code.

Anyway, here it is.
Attached File(s)
File Type: mq4 Rsi BlackFeet modded.mq4   4 KB | 2,416 downloads
  • #30
  • Dec 30, 2009 9:42pm Dec 30, 2009 9:42pm
hey flyer.... that's very handy..... some people want them on the main chart and some not.... some want dashboard style.... h


//----

hey mark...... knew i forgot something..... swapped the indicator above with alerting type..... didn't have time to test it...... let me know if it does not alert.....

hayseed at bellsouth.net , if ya want me to look at the ea changes......h
to trade and code, keep both simple... no call to impress....h
  • #31
  • Dec 30, 2009 9:53pm Dec 30, 2009 9:53pm
H,
Have you dealt with any EAs?
I have a closing problem where EMA crossover and TSL give back to many profits! Almost every trade becomes profitable very quickly.
Running 24/7 on a demo for a long time with thousands of trades and Equity stays flat; wins wipe out losses.
Mark
  • #32
  • Dec 31, 2009 8:48am Dec 31, 2009 8:48am
Thanks for the template & system Black Feet, it worked out well today ony two signals so far, but yesterday it was crazy, May I ask is this from fx bootcamp of Utube fame..?

Thanks

Danny

P.s how do you use the macd..
Attached Image (click to enlarge)
Click to Enlarge Name: pic.gif Size: 12 KB
  • #33
  • Jan 3, 2010 12:12pm Jan 3, 2010 12:12pm
Hi Hayseed,

THANKS A LOT FOR YOUR INDI. It works very well. I implemented an audible alert and I'm waiting this monday to use it real.(BTW I'm honored to have an indi by my name !).

Hi RebelHeart,
My use of the MACD is quite classical. For instance to go Long I want the Line to climb up, the histogram to get shorter if under the ZL and go through the Zero Line or get longer if already above the ZL, change from red to blue, and see the histogram bars go beyhond the Line.

Regards

BBF
BigBlackfeet Always on the(forex) war path !
  • #34
  • Apr 17, 2010 11:57am Apr 17, 2010 11:57am
Quoting flyer415
I modded your blackfeet rsi to have the arrows on the chart and the indicator window at the same time.
I just stumbled upon this indicator (rsi blackfeet modded) due to a programming job that was given to me along with a copy of this indicator. Is this your code?

(Code formatting applied for better readability)
Inserted Code
   for( i = limit - 1; i >= 0; i -- ){
      if((rsi[i+1] > rsifastma[i+1]) && (rsi[i+2] < rsifastma[i+2])){
         CrossUp[i+1]   = Offset;
         [color=Red][color=Black]ObjectCreate([b][color=Red]"Up-Arrow"+i[/color][/b],OBJ_ARROW,0,Time[i+1],Low[i+1] - price_offset*Point);[/color]
[/color]         ObjectSet([b][color=Red]"Up-Arrow"+i[/color][/b],OBJPROP_ARROWCODE,233);
         ObjectSet([b][color=Red]"Up-Arrow"+i[/color][/b],OBJPROP_COLOR,Green);
      }
   }
This:
ObjectCreate("Up-Arrow"+i, ...);

is wrong. You cannot name the objects with bar numbers. It will not plot new arrows when running forward, i will always be zero for newly created arrows because it is the number of the last bar and the last bar is always zero.

For future work similar like this I suggest you use Time[i] for creating the object name.
  • #35
  • Apr 17, 2010 12:52pm Apr 17, 2010 12:52pm
7bit,

That makes total sense. I had not thought about that.

Thank you for showing me the correct way of doing this.

So I just use "Up Arrow"+Time[i]

An easy mod but I will have to make changes to several indicators.
  • #36
  • Edited 8:38pm Apr 20, 2010 3:08am | Edited 8:38pm
Nice Indi/Alert....
can you make (modify)those indicator to 2 RSI Crosses?
example: RSI(5) crosses RSI(14) ?
RSI Blackfeet use RSI cross MA,
how about alert signal of RSI crosses RSI at dips(30 level) and/or top (70 level)?
I think it will give good signal...
Thank you...
  • #37
  • Jun 17, 2010 8:25pm Jun 17, 2010 8:25pm
heyyy i am looking for rsi cross alert by an arrow on price when rsi cross 50!!!
if rsi cross 50 from up to bottom i want to have sell alert
if rsi cross 50 from bottom to up i want to have buy alert

if you have share please
  • #38
  • Sep 15, 2010 2:54am Sep 15, 2010 2:54am
Quoting GaPs
Nice Indi/Alert....
can you make (modify)those indicator to 2 RSI Crosses?
example: RSI(5) crosses RSI(14) ?
RSI Blackfeet use RSI cross MA,
how about alert signal of RSI crosses RSI at dips(30 level) and/or top (70 level)?
I think it will give good signal...
Thank you...
try this
Attached File(s)
File Type: mq4 RSI_X2_alarm.mq4   4 KB | 3,176 downloads
  • #39
  • Oct 8, 2010 5:23am Oct 8, 2010 5:23am
Hi,

I have been reading a lot about rsi in this thread. I also believe that rsi is a strong indicator. I also trade using rsi and am looking for an indicator which alerts whenever it crosses the level 50. I believe level 50 is a very important level in rsi and a lot of false trades can be eliminated if we keep an eye on that level.

Could anyone please post the rsi here?
Thanks a lot in advance.
  • #40
  • Mar 16, 2012 1:11am Mar 16, 2012 1:11am
Hi all.

Great thread! How can an email alert be added to the rsi x2 alarm?

Thanks
0 traders viewing now