trendchaser ea's | Page 6 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

trendchaser psar 268 replies

Attachments: trendchaser ea's
Exit Attachments

trendchaser ea's

  • #101
  • Nov 26, 2007 5:05pm Nov 26, 2007 5:05pm
no, by default the ea trades same as psar3.2

you have to manually set up the envelope lines how you want them, then just turn them on

Quoting matrixebiz
Ok, so the template for psar v3.3 enables the new features?
  • #102
  • Nov 26, 2007 5:07pm Nov 26, 2007 5:07pm
if you dont see a way to improve then dont do nothing
but if you see the trades going into great profit, then coming back to nothing
use these envelopes to tweak that pair
this is the best way iv found to do this so far
  • #103
  • Nov 26, 2007 10:01pm Nov 26, 2007 10:01pm
i just updated the ea 3.3 in that post, re dl
i had 4gotten some left over code for closing buys
if you have the first one with this error your buy orders can be closed repeatedly
  • #104
  • Nov 26, 2007 11:33pm Nov 26, 2007 11:33pm
heres the latest version
iv added the options to also turn off psar
im including a profile that is set up on the 8 pairs as a
envelope only ea
Attached File(s)
File Type: ex4 trendchaser_psar_v3.3.ex4   61 KB | 457 downloads
File Type: zip trendchaser envelopes.zip   8 KB | 607 downloads
  • #105
  • Nov 27, 2007 10:33am Nov 27, 2007 10:33am
Quoting trendchaser
heres the latest version
iv added the options to also turn off psar
im including a profile that is set up on the 8 pairs as a
envelope only ea
Early results are spectacular. Will post statement this evening when I get home from work.
  • #106
  • Edited 3:27pm Nov 27, 2007 1:04pm | Edited 3:27pm
Trying your Supernova EA, what does OneEntryPerSignal do again?
If False will it place many Long/Short trade in a row? or does that mean if One trade closes then it will check again for met conditions and place a trade right away?
I only want ONE trade open at a time until it's closed but when it's closed I want to the EA to check trade conditions and trade if met right away.
If True does it WAIT until the NEXT signal AFTER closing the previous trade to open another?

Please explain how that option works.

Thank you


EDIT: can you add the MaxShiftFromQQEcross option like in Skyline ea? Thanks
See pic. It traded to late because QQE signal was way earlier. also, can you figure out how to be able to set TP and SL values of 0 and your EA still work.
Attached Image (click to enlarge)
Click to Enlarge Name: tc sn.JPG Size: 103 KB
24 hours in a day – 24 bottles of beer in a case – Coincidence? I think not
  • #107
  • Edited 9:47pm Nov 27, 2007 4:13pm | Edited 9:47pm
also, looks like it doesn't always close when told. I have close only on next QQE and trade is sill open

EDIT: EA is not closing trades Should I use beta instead of supernova? also, can you explain to me how the 20 and 30 work with the DMI indicator. Thanks

Can you add the option to beta5, if I want all conditions to be met to exit also like the other EA just incase I want two indicators to agree on an exit.
Attached Image (click to enlarge)
Click to Enlarge Name: noclose.JPG Size: 128 KB
24 hours in a day – 24 bottles of beer in a case – Coincidence? I think not
  • #108
  • Nov 27, 2007 6:09pm Nov 27, 2007 6:09pm
Hi Trendchaser,

I just spend some hours reading about your EAs in Supernova thread and here too, and I'm a little bit confused in between the differents versions and how they work but it's not my point here.

I just downloaded "Trendchaser v 3.3" in order to test it and the first action the EA took .... was to close the two trades I had running. I thought it was fixed

I know I'm very green with your EAs and want to learn how to use them, but in order to ease a bit on the confusion I would greatly appreciate if you can explain the basics principe on what they are working and the basics setting to use. Or direct me at the right place.

Anyway, tomorrow I will read again the thread and try to find my way ( now my eyes need some rest)

Thanks in advance for you answer.

AL
AL
  • #109
  • Nov 27, 2007 9:50pm Nov 27, 2007 9:50pm
beta5 must be having a problem with exits also. Can you fix exits with Supernova and Beta5
Thanks
Attached Image (click to enlarge)
Click to Enlarge Name: noclose.JPG Size: 94 KB
24 hours in a day – 24 bottles of beer in a case – Coincidence? I think not
  • #110
  • Nov 27, 2007 11:05pm Nov 27, 2007 11:05pm
your trade should close at the end of the bar
Quoting matrixebiz
also, looks like it doesn't always close when told. I have close only on next QQE and trade is sill open

EDIT: EA is not closing trades Should I use beta instead of supernova? also, can you explain to me how the 20 and 30 work with the DMI indicator. Thanks

Can you add the option to beta5, if I want all conditions to be met to exit also like the other EA just incase I want two indicators to agree on an exit.
  • #111
  • Nov 27, 2007 11:12pm Nov 27, 2007 11:12pm
in beta 5 theres 2 modes for qqea exit
after selecting exit with qqea you also must choose which mode
so you need exit with qq=true
and exit with qq normal=true
exit qq slope= false

if you have both modes false qq wont exit

Quoting matrixebiz
beta5 must be having a problem with exits also. Can you fix exits with Supernova and Beta5
Thanks
  • #112
  • Edited 11:57pm Nov 27, 2007 11:26pm | Edited 11:57pm
hey al
i havent experienced this, because i use seperate installs for every system especially so i dont get confused

but i believe i fixed this problem, itl have to be tested

theres more about this ea on the psar thread
well previouse versions anyway

http://www.forexfactory.com/showthread.php?t=54756



Quoting Sailingalbob
Hi Trendchaser,

I just spend some hours reading about your EAs in Supernova thread and here too, and I'm a little bit confused in between the differents versions and how they work but it's not my point here.

I just downloaded "Trendchaser v 3.3" in order to test it and the first action the EA took .... was to close the two trades I had running. I thought it was fixed

I know I'm very green with your EAs and want to learn how to use them, but in order to ease a bit on the confusion I would greatly appreciate if you can explain the basics principe on what they are working and the basics setting to use. Or direct me at the right place.

Anyway, tomorrow I will read again the thread and try to find my way ( now my eyes need some rest)

Thanks in advance for you answer.

AL
Attached File(s)
File Type: ex4 trendchaser_psar_v3.4.ex4   61 KB | 585 downloads
  • #113
  • Nov 27, 2007 11:30pm Nov 27, 2007 11:30pm
thats right matrix
single entry will only allow 1 entry until a new signal
if this is false it will reopen a trade
see if you set it false + use a stop, or tp
theres no point
without this feature sl tp ts is useless

i use this at false only for a stop and reverse system
it enters a bar sooner so its more accurate of a entry

Quoting matrixebiz
Trying your Supernova EA, what does OneEntryPerSignal do again?
If False will it place many Long/Short trade in a row? or does that mean if One trade closes then it will check again for met conditions and place a trade right away?
I only want ONE trade open at a time until it's closed but when it's closed I want to the EA to check trade conditions and trade if met right away.
If True does it WAIT until the NEXT signal AFTER closing the previous trade to open another?

Please explain how that option works.

Thank you


EDIT: can you add the MaxShiftFromQQEcross option like in Skyline ea? Thanks
See pic. It traded to late because QQE signal was way earlier. also, can you figure out how to be able to set TP and SL values of 0 and your EA still work.
  • #114
  • Nov 27, 2007 11:39pm Nov 27, 2007 11:39pm
i gotta get some sleep
but tomorow i will add some code so that the ea cannot open or close more than once on the same bar
then we can use tick mode safely
this will get us in and out of the trade a bar sooner
  • #115
  • Edited 6:47am Nov 28, 2007 6:13am | Edited 6:47am
Quoting trendchaser
in beta 5 theres 2 modes for qqea exit
after selecting exit with qqea you also must choose which mode
so you need exit with qq=true
and exit with qq normal=true
exit qq slope= false

if you have both modes false qq wont exit
Ok, what is the difference in "Direction of slope" and "Normal"?
Can you add the MaxShiftFromQQEcross option like in Skyline ea?
SO what option would I select if I only want one trade open at a time but when closed my QQ to have the EA immediately check if trade conditions are met? would that be stop and reverse? Can you let me know what I need to select or if you need to add more code.
If I enable two indicators for exit, is there an option to exit if all agree to exit (like in your supernova)? or will it exit on any one? Can you add the option for them to all agree or not on exits also?
So for QQE entry please explain how Normal, Single and Direction of Slope behave.
How do the DMI 20 and 30 markers work?
The close with qqe on your Supernova EA doesn't seem to be working.
Ok, so I guess what I would like to see is your Beta6 have ONE trade open at one time but a stop and reverse where if a trade is closed then the EA will check if conditions are met and place a new trade right away and NOT wait until the next signal.
Is that too much to ask, hope I didn't confuse you Maybe you can also add another MaxLots=1 option for ONE trade open only at one time until the previous is closed.

EDIT: I'll have to wait for the MaxShiftFromQQEcross option because it opened a trade way to late because I just loaded the EA on a chart again. See pic
Thanks
Attached Image (click to enlarge)
Click to Enlarge Name: TC.JPG Size: 94 KB
24 hours in a day – 24 bottles of beer in a case – Coincidence? I think not
  • #116
  • Nov 28, 2007 7:58am Nov 28, 2007 7:58am
Quoting trendchaser
hey al
i havent experienced this, because i use seperate installs for every system especially so i dont get confused

but i believe i fixed this problem, itl have to be tested

theres more about this ea on the psar thread
well previouse versions anyway

http://www.forexfactory.com/showthread.php?t=54756

Thanks Tradechaser, I will have a look.

AL
AL
  • #117
  • Nov 28, 2007 8:58am Nov 28, 2007 8:58am
heres a fixed version of 3.1
its not optimized in any way
but it trades correctly
always leave tick mode on
single entry works unless you close the trade on the very first bar where it opened
if you do this it will reenter
trades are now open and closed at the exact qqea cross

Quoting matrixebiz
Ok, what is the difference in "Direction of slope" and "Normal"?
Can you add the MaxShiftFromQQEcross option like in Skyline ea?
SO what option would I select if I only want one trade open at a time but when closed my QQ to have the EA immediately check if trade conditions are met? would that be stop and reverse? Can you let me know what I need to select or if you need to add more code.
If I enable two indicators for exit, is there an option to exit if all agree to exit (like in your supernova)? or will it exit on any one? Can you add the option for them to all agree or not on exits also?
So for QQE entry please explain how Normal, Single and Direction of Slope behave.
How do the DMI 20 and 30 markers work?
The close with qqe on your Supernova EA doesn't seem to be working.
Ok, so I guess what I would like to see is your Beta6 have ONE trade open at one time but a stop and reverse where if a trade is closed then the EA will check if conditions are met and place a new trade right away and NOT wait until the next signal.
Is that too much to ask, hope I didn't confuse you Maybe you can also add another MaxLots=1 option for ONE trade open only at one time until the previous is closed.

EDIT: I'll have to wait for the MaxShiftFromQQEcross option because it opened a trade way to late because I just loaded the EA on a chart again. See pic
Thanks
Attached File(s)
File Type: ex4 trendchaser supernova3.1.ex4   56 KB | 428 downloads
  • #118
  • Edited 10:40am Nov 28, 2007 9:11am | Edited 10:40am
Quoting trendchaser
heres a fixed version of 3.1
its not optimized in any way
but it trades correctly
always leave tick mode on
single entry works unless you close the trade on the very first bar where it opened
if you do this it will reenter
trades are now open and closed at the exact qqea cross
Ok, thanks. and what do I set so it only has one trade open at once, doesn't trade if not right when qqe crosses one or two bars after maybe, and opens a new trade when qqe closes previous trade if conditions are met without waiting until the next qqe signal ?
Maybe add a maxlots open =1 option
Thanks

EDIT: Something is wrong. It opened two trades then closed for no reason when I have them set to close on next QQE signal ??
Attached Image (click to enlarge)
Click to Enlarge Name: Bad trades.JPG Size: 100 KB
24 hours in a day – 24 bottles of beer in a case – Coincidence? I think not
  • #119
  • Nov 28, 2007 5:26pm Nov 28, 2007 5:26pm
hey matrix
i found the problem
aparently when i made the qqeaopen indicator
i had edited my original qqea and didnt realize
i updated ea
use the qqeaopen below
you may already have it
Attached File(s)
File Type: mq4 trendchaser supernova3.1.mq4   49 KB | 1,054 downloads
File Type: mq4 QQEAopen.mq4   3 KB | 577 downloads
  • #120
  • Edited Nov 29, 2007 9:42pm Nov 28, 2007 10:26pm | Edited Nov 29, 2007 9:42pm
Quoting trendchaser
hey matrix
i found the problem
aparently when i made the qqeaopen indicator
i had edited my original qqea and didnt realize
i updated ea
use the qqeaopen below
you may already have it
Ok, thanks.
So should I use Tick Mode?
The EA only allows ONE order open at a time correct?
Once an order is closed will it check right away if open conditions are met like a stop and reverse, correct?
and can you add the MaxShiftFromQQEcross option? Please

That should do it
Thanks

EDIT: Looks like it doesn't totally keep track of MagicNumbers or whatever because I loaded the EA onto a platform that had a trade and different MagicNumber from another EA and your EA closed it. Same currency but different MagicNumber ??

"also if you set level and angle to false"
I don't see a level and angle option in the settings ?? I don't understand how the values in DMI work so I would like to just trade on crossing like with QQE. Unless you can explain more clear about signals with DMI. Just noticed that Supernova 3.1 doesn't have the DMI values anyway only smooth , must only be with the beta ea's. Thanks
24 hours in a day – 24 bottles of beer in a case – Coincidence? I think not
0 traders viewing now