Auslanco 15min GBP/JPY startegy

Quoting Developed by Spanishfly based on my original 4hr/1hr MTF strategy.<br /> <br /> 15 min (Intra-day) GBP/JPY for VT charts . Charts can be downloaded free via [URL=&quot;http://www.vtsystems.com/&quot;

Disliked

www.vtsystems.com[/url])

a).Simple Moving Average 5 close
b).Gann Hi Low Activator 10
c).Level stop Reverse version 2

Values : ATR Periods 9
ATR Multiplier 3

d).QQE alert
Values: Smoothing Factor 60

Ignored

Quoting Que

Disliked

Problem with what you are asking for. QQE is in a seperate window, therfore any dots I place would be based in the current window of QQE not the chart window.

Another option would be a Vert line but that just looks ugly.

I am also changing the code a bit to take out the alert as previously asked and adding a Playsound, Comment and Print statement. This will alow you to have custom sounds for each alert. This should help a bit. Looking for the best way to do this.

Ignored

Quoting brucehvn

Disliked

Hi Que,

If you want to place the dots as objects, you can place them in the chart window from your indicator. Just specify window 0 in the ObjectCreate call.

Ignored

Quoting Venturess

Disliked

Hope I can get some help please. Trying to understand the ATR Multiplier 3...how does one go about adding this.

As well, does it matter what the colour of the arrows are as my set up shows blue arrows/blue dot.

And finally, any VT experts can guide me thru deleting the previous Level stop reverse version?

Thank you.

Ignored

Quoting auslanco

Disliked

The MT4 template :
no QQE alerts. Instead I have added the QQE indicator



QQE indicator for MT4 was created by Que
Level stop Reverse indicator was created for MT4 by Brucehven

Ignored

Quoting stace

Disliked

Can you be so kind and post indicators you are using in your template?
I have QQe but other i cant find

Ignored

Quoting brucehvn

Disliked

The level stop reverse is in this thread. Post 24.

Bruce

Ignored

Quoting stace

Disliked

i found.
but i need some momentum and gann activator

Ignored

Quoting brucehvn

Disliked

Here is an updated version of my MT4-LevelStop-Reverse indicator. This one has some bug fixes and some changes to the configuration to make it a bit easier.

This is version Beta 0.2. As I get feedback, I will release newer versions as needed.

Ignored

Quoting Pips_Cruiser

Disliked

Hi Venturess,

The two values refer to the "Level Stop Reverse" setups. You will have a chance to set them up when you attach the LSR system to a chart.

There is no real need to delete the previous LSR you loaded. The new one will be loaded with a 2 at the end.

I think you can work your way through it from here. If not, give a shout.

Ron http://www.forexfactory.com/images/icons/icon14.gif

Ignored

Quoting auslanco

Disliked

Que;1572410]So we want a Dot when?

This is getting messy, I am looking at an all in one indicator like I did with the Bullseye indicator.

But for now 2 questions.

1. When do we want a dot?
When the QQE RSI Index cross the slow RSI. (above or below 50line )

2. Do you mind if I take a look at your code Bruce? I am not going to waist time if you do not want me to.

Ignored

Quoting Que

Disliked

So,

You want a dot when the QQE crosses only after it crosses the 50 line?

So for a buy dot, you will trigger on a QQE cross only if the cross is above 50?

Ignored

Quoting brucehvn

Disliked

Here is an updated version of my MT4-LevelStop-Reverse indicator. This one has some bug fixes and some changes to the configuration to make it a bit easier.

Note, I've started naming the file with the version. Before installing this, if you downloaded my previous version, go to your indicators folder on MT4 and delete "MT4-LevelStop-Reverse.mq4" and "MT4-LevelStop-Reverse.ex4". That will avoid confusion about which one to use. This file is called "MT4-LevelStop-Reverse-vB0-2.mq4".

Also, if you want to save a template with this indicator setup, you will need to perform one step first. The arrows that get drawn on the chart are objects that the indicator will delete when unloaded. However, when you save a template, it saves the objects as well which means those arrows will come back every time you load the template which is not the desired behavior. You want the indicator to create and remove the objects. When you have your screen all setup and you want to save the template, first right-click on the chart and choose "Object List". Delete any objects with the name "VTS-xxxxx". Then save your template. The arrows will not be there anymore, but as soon as you reload the template, the indicator will draw them again.

Beta Version 0.2 September 2, 2007

This is a combination of two VT Trader trading systems. The first is the default VT-LevelStop-Reverse and the second is one that was modified to allow customizing the ATR settings for calculating the stop line. I've tried to combine these 2 versions into a single MT4 indicator.

The default VT version allows you to use two modes, optimized, and manual.
Optimized mode calculates the stop line by using a 14 period EMA smoothed ATR(14) multiplied by a fixed multiplier of 2.824. In manual mode, you set a fixed number of pips you want the stop line to be drawn. In my MT4 version, there are two modes:

1. ATR mode (customizable ATR period, multiplier, and smoothing)
2. Fixed stop mode (customizable fixed stop)

The input parameters are as follows:

1. UseATRMode - This calculates the stop line based on ATR using customizable period, multiplier and smoothing.
2. NonATRStopPips - If "UseATRMode" is false, then this value is the number of fixed pips to place the stop line.
3. ATRPeriod - If "UseATRMode" is true, then this sets the ATR period.
4. ATRMultiplier - If "UseATRMode" is true, then the ATR value will be multiplied by this value when calculating the stop line.
5. ATRSmoothing -If "UseATRMode" is true, then this will smooth the selected ATR with an EMA of this smoothing period.
6. UpArrowColor - The color the Up arrows will display in.
7. DnArrowColor - The color the Down arrows will display in.
8. ArrowDistance - The number of pips away from the high or low of the bar that the arrow should display.

On the colors tab, only the first color is used. It is the color of the dotted
stop line.

For Auslanco's 15M strategy posted at the beginning of this thread, use the following settings:
UseATRMode = true
ATRPeriod = 9
ATRMultiplier = 3.0
ATRSmoothing = 0

For the default VT-LevelStop-Reverse behavior, set the following:
UseATRMode = true
ATRPeriod = 14
ATRMultiplier = 2.824
ATRSmoothing = 14

To use this indicator, copy it to your <MetaTrader Folder>\experts\indicators
folder. Then restart MT4. It will appear in the custom indicators list.

This is version Beta 0.2. As I get feedback, I will release newer versions as needed.

Ignored

Quoting xlr8

Disliked

Hi Bruce,

To use this new indicator of yours, do we still need to have 2 versions of it in our MT4 charts?

Ignored

Quoting Que

Disliked

So,

You want a dot when the QQE crosses only after it crosses the 50 line?

So for a buy dot, you will trigger on a QQE cross only if the cross is above 50?

Ignored

Quoting brucehvn

Disliked

Not according to Auslanco's 15 min strategy. Just one copy of my indicator and one copy of the QQE.

Bruce

Ignored

Quoting Que

Disliked

As I had a few PM's asking for both, I made it as customizable as possible from the UI.

I think its self explanitory, check it out and see if this is what you guys are looking for.

By Default all Dots, Alerts or Emails are off.


Aus or whoever can make a template file of this so everyone will have it exactly as you want it.

Ignored