I will code your EAs and Indicators for no charge

Quoting Paymanz

Disliked

{quote} thanks jeanlouie , would you consider adding trend line support(ideally only the left handle to be magnetic) and also for rectangles to be able to extend them without invalidate the zone you still have to use the right corners can you please add something like this tool with only one vertical line on the right end of rectangle that lets you to extend without moving the original position of rectangle. https://www.mql5.com/en/market/produ...source=Unknown

Ignored

Quoting BlueRain

Disliked

{quote} i had one similar one - not dashboard - already and just modified quick. You will get alert when crossing happens. ( MA cross Lower BB up and MA Cross High BB down ) Someone can make dashboard using this indicator if possible. Updated: Scanner added. I had similar one so just changed how it gets value. ( Not Tested ) {file} {file}

Ignored

Quoting Hammertop

Disliked

Hello. Any chance to add 2 options to this ATR indicator in order to change both the period and the time frame on which the ATR is calculated? I believe by default the period is 7 and the time frame is D1 at the moment. I would really appreciate it. Thank you {file} {image}

Ignored

Quoting BlueRain

Disliked

{quote} I am sorry but this is not the original code - it is stolen / decompiled version which I can't help on. Please supply original code if you are asking for help.

Ignored

Quoting Samalin

Disliked

https://www.chartswithjake.com/94-2/ https://www.youtube.com/watch?v=f2ceE2N4ND0 please kindly help to make this strategy as one indicators, am having difficulty uploading the video but the above link will {image} {image}

Ignored

Quoting T4Trade

Disliked

{quote} Dear Mentor, is it please possible to add time frame in alerts because i use this indcator on 1h and 15 min time frame and when alert comes,i dono which tf it is refering to,thanks.

Ignored

Quoting aandragon

Disliked

{quote} Hi. Its not clear what you want: there are two moing averages one based on the opening price and the other on the close but I have no idea what is in the indicator window (the white and green lines). Let me know what this indicator is and I can give you an combined indicator in a flash! Thanks

Ignored

Quoting Hammertop

Disliked

{quote} I'm sorry but that's all I have. I don't even remember where I downloaded it. Unfortunately the website mentioned in the code doesn't even exist anymore EDIT: I just did a quick search on the Internet and quite a few sites provide it. Unfortunately it's always the same decompiled indi. Really nothing you can do since the original site is gone? Sorry for persisting.

Ignored

Quoting tintep

Disliked

{quote} Hi Hammertop . I have this . I don't remember I load from? this is same original. {file}

Ignored

void OnStart()
  {
   int   SPREAD_Pure = SymbolInfoInteger(Symbol(), SYMBOL_SPREAD);
   MqlRates PRICE_Information[];
   ArraySetAsSeries(PRICE_Information,true);
   CopyRates(_Symbol,PERIOD_CURRENT,0,Bars(_Symbol,PERIOD_CURRENT),PRICE_Information);

   double   ATR_Data_M1[];
   ArraySetAsSeries(ATR_Data_M1,true);
   CopyBuffer(iATR(_Symbol,PERIOD_M1,27),0, 0, 100, ATR_Data_M1);
   double   ATR_Pure_M1 = (NormalizeDouble(ATR_Data_M1[0],Digits()))/_Point;
   double   HIGHEST_Data_M1[];
   ArraySetAsSeries(HIGHEST_Data_M1,true);
   CopyHigh(_Symbol,PERIOD_M1,0,27,HIGHEST_Data_M1);
   double   HIGH_Pure_M1   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_M1,0,27)].high),Digits()))/_Point;
   double   LOWEST_Data_M1[];
   ArraySetAsSeries(LOWEST_Data_M1,true);
   CopyLow(_Symbol,PERIOD_M1,0,27,LOWEST_Data_M1);
   double   LOW_Pure_M1    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_M1,0,27)].low),Digits()))/_Point;
   double   PROFIT_M1   =  NormalizeDouble(((HIGH_Pure_M1-LOW_Pure_M1-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_M1   =  NormalizeDouble(((ATR_Pure_M1/SPREAD_Pure)-1),2);

   double   ATR_Data_M3[];
   ArraySetAsSeries(ATR_Data_M3,true);
   CopyBuffer(iATR(_Symbol,PERIOD_M3,27), 1, 0, 100, ATR_Data_M3);
   double   ATR_Pure_M3 = (NormalizeDouble(ATR_Data_M3[0],Digits()))/_Point;
   double   HIGHEST_Data_M3[];
   ArraySetAsSeries(HIGHEST_Data_M3,true);
   CopyHigh(_Symbol,PERIOD_M3,0,27,HIGHEST_Data_M3);
   double   HIGH_Pure_M3   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_M3,0,27)].high),Digits()))/_Point;
   double   LOWEST_Data_M3[];
   ArraySetAsSeries(LOWEST_Data_M3,true);
   CopyLow(_Symbol,PERIOD_M3,0,27,LOWEST_Data_M3);
   double   LOW_Pure_M3    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_M3,0,27)].low),Digits()))/_Point;
   double   PROFIT_M3   =  NormalizeDouble(((HIGH_Pure_M3-LOW_Pure_M3-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_M3   =  NormalizeDouble(((ATR_Pure_M3/SPREAD_Pure)-1),2);

   double   ATR_Data_M5[];
   ArraySetAsSeries(ATR_Data_M5,true);
   CopyBuffer(iATR(_Symbol,PERIOD_M5,24), 2, 0, 100, ATR_Data_M5);
   double   ATR_Pure_M5 = (NormalizeDouble(ATR_Data_M5[0],Digits()))/_Point;
   double   HIGHEST_Data_M5[];
   ArraySetAsSeries(HIGHEST_Data_M5,true);
   CopyHigh(_Symbol,PERIOD_M5,0,24,HIGHEST_Data_M5);
   double   HIGH_Pure_M5   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_M5,0,24)].high),Digits()))/_Point;
   double   LOWEST_Data_M5[];
   ArraySetAsSeries(LOWEST_Data_M5,true);
   CopyLow(_Symbol,PERIOD_M5,0,24,LOWEST_Data_M5);
   double   LOW_Pure_M5    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_M5,0,24)].low),Digits()))/_Point;
   double   PROFIT_M5   =  NormalizeDouble(((HIGH_Pure_M5-LOW_Pure_M5-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_M5   =  NormalizeDouble(((ATR_Pure_M5/SPREAD_Pure)-1),2);

   double   ATR_Data_M10[];
   ArraySetAsSeries(ATR_Data_M10,true);
   CopyBuffer(iATR(_Symbol,PERIOD_M10,13), 3, 0, 100, ATR_Data_M10);
   double   ATR_Pure_M10 = (NormalizeDouble(ATR_Data_M10[0],Digits()))/_Point;
   double   HIGHEST_Data_M10[];
   ArraySetAsSeries(HIGHEST_Data_M10,true);
   CopyHigh(_Symbol,PERIOD_M10,0,13,HIGHEST_Data_M10);
   double   HIGH_Pure_M10   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_M10,0,13)].high),Digits()))/_Point;
   double   LOWEST_Data_M10[];
   ArraySetAsSeries(LOWEST_Data_M10,true);
   CopyLow(_Symbol,PERIOD_M10,0,13,LOWEST_Data_M10);
   double   LOW_Pure_M10    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_M10,0,13)].low),Digits()))/_Point;
   double   PROFIT_M10   =  NormalizeDouble(((HIGH_Pure_M10-LOW_Pure_M10-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_M10   =  NormalizeDouble(((ATR_Pure_M10/SPREAD_Pure)-1),2);

   double   ATR_Data_M15[];
   ArraySetAsSeries(ATR_Data_M15,true);
   CopyBuffer(iATR(_Symbol,PERIOD_M15,13), 4, 0, 100, ATR_Data_M15);
   double   ATR_Pure_M15 = (NormalizeDouble(ATR_Data_M15[0],Digits()))/_Point;
   double   HIGHEST_Data_M15[];
   ArraySetAsSeries(HIGHEST_Data_M15,true);
   CopyHigh(_Symbol,PERIOD_M15,0,13,HIGHEST_Data_M15);
   double   HIGH_Pure_M15   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_M15,0,13)].high),Digits()))/_Point;
   double   LOWEST_Data_M15[];
   ArraySetAsSeries(LOWEST_Data_M15,true);
   CopyLow(_Symbol,PERIOD_M15,0,13,LOWEST_Data_M15);
   double   LOW_Pure_M15    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_M15,0,13)].low),Digits()))/_Point;
   double   PROFIT_M15   =  NormalizeDouble(((HIGH_Pure_M15-LOW_Pure_M15-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_M15   =  NormalizeDouble(((ATR_Pure_M15/SPREAD_Pure)-1),2);

   double   ATR_Data_M30[];
   ArraySetAsSeries(ATR_Data_M30,true);
   CopyBuffer(iATR(_Symbol,PERIOD_M30,13), 5, 0, 100, ATR_Data_M30);
   double   ATR_Pure_M30 = (NormalizeDouble(ATR_Data_M30[0],Digits()))/_Point;
   double   HIGHEST_Data_M30[];
   ArraySetAsSeries(HIGHEST_Data_M30,true);
   CopyHigh(_Symbol,PERIOD_M30,0,13,HIGHEST_Data_M30);
   double   HIGH_Pure_M30   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_M30,0,13)].high),Digits()))/_Point;
   double   LOWEST_Data_M30[];
   ArraySetAsSeries(LOWEST_Data_M30,true);
   CopyLow(_Symbol,PERIOD_M30,0,13,LOWEST_Data_M30);
   double   LOW_Pure_M30    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_M30,0,13)].low),Digits()))/_Point;
   double   PROFIT_M30   =  NormalizeDouble(((HIGH_Pure_M30-LOW_Pure_M30-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_M30   =  NormalizeDouble(((ATR_Pure_M30/SPREAD_Pure)-1),2);

   double   ATR_Data_H1[];
   ArraySetAsSeries(ATR_Data_H1,true);
   CopyBuffer(iATR(_Symbol,PERIOD_H1,12), 6, 0, 100, ATR_Data_H1);
   double   ATR_Pure_H1 = (NormalizeDouble(ATR_Data_H1[0],Digits()))/_Point;
   double   HIGHEST_Data_H1[];
   ArraySetAsSeries(HIGHEST_Data_H1,true);
   CopyHigh(_Symbol,PERIOD_H1,0,12,HIGHEST_Data_H1);
   double   HIGH_Pure_H1   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_H1,0,12)].high),Digits()))/_Point;
   double   LOWEST_Data_H1[];
   ArraySetAsSeries(LOWEST_Data_H1,true);
   CopyLow(_Symbol,PERIOD_H1,0,12,LOWEST_Data_H1);
   double   LOW_Pure_H1    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_H1,0,12)].low),Digits()))/_Point;
   double   PROFIT_H1   =  NormalizeDouble(((HIGH_Pure_H1-LOW_Pure_H1-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_H1   =  NormalizeDouble(((ATR_Pure_H1/SPREAD_Pure)-1),2);

   double   ATR_Data_H3[];
   ArraySetAsSeries(ATR_Data_H3,true);
   CopyBuffer(iATR(_Symbol,PERIOD_H3,8), 7, 0, 100, ATR_Data_H3);
   double   ATR_Pure_H3 = (NormalizeDouble(ATR_Data_H3[0],Digits()))/_Point;
   double   HIGHEST_Data_H3[];
   ArraySetAsSeries(HIGHEST_Data_H3,true);
   CopyHigh(_Symbol,PERIOD_H3,0,8,HIGHEST_Data_H3);
   double   HIGH_Pure_H3   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_H3,0,8)].high),Digits()))/_Point;
   double   LOWEST_Data_H3[];
   ArraySetAsSeries(LOWEST_Data_H3,true);
   CopyLow(_Symbol,PERIOD_H3,0,8,LOWEST_Data_H3);
   double   LOW_Pure_H3    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_H3,0,8)].low),Digits()))/_Point;
   double   PROFIT_H3   =  NormalizeDouble(((HIGH_Pure_H3-LOW_Pure_H3-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_H3   =  NormalizeDouble(((ATR_Pure_H3/SPREAD_Pure)-1),2);

   double   ATR_Data_H6[];
   ArraySetAsSeries(ATR_Data_H6,true);
   CopyBuffer(iATR(_Symbol,PERIOD_H6,4), 8, 0, 100, ATR_Data_H6);
   double   ATR_Pure_H6 = (NormalizeDouble(ATR_Data_H6[0],Digits()))/_Point;
   double   HIGHEST_Data_H6[];
   ArraySetAsSeries(HIGHEST_Data_H6,true);
   CopyHigh(_Symbol,PERIOD_H6,0,4,HIGHEST_Data_H6);
   double   HIGH_Pure_H6   = (NormalizeDouble((PRICE_Information[ArrayMaximum(HIGHEST_Data_H6,0,4)].high),Digits()))/_Point;
   double   LOWEST_Data_H6[];
   ArraySetAsSeries(LOWEST_Data_H6,true);
   CopyLow(_Symbol,PERIOD_H6,0,4,LOWEST_Data_H6);
   double   LOW_Pure_H6    = (NormalizeDouble((PRICE_Information[ArrayMinimum(LOWEST_Data_H6,0,4)].low),Digits()))/_Point;
   double   PROFIT_H6   =  NormalizeDouble(((HIGH_Pure_H6-LOW_Pure_H6-SPREAD_Pure)/SPREAD_Pure),2);
   double   GROWTH_H6   =  NormalizeDouble(((ATR_Pure_H6/SPREAD_Pure)-1),2);
   
   
   SendMail
   (_Symbol,
   "Spread = "    + SPREAD_Pure  +"\n"+
   "Minute 1   : "   + "Profit = "+PROFIT_M1+", "+"Growth = "+GROWTH_M3+", "+"ATR = "+ATR_Pure_M1+", "+"High = "+HIGH_Pure_M1+", "+"Low = "+LOW_Pure_M1 +"\n"+
   "Minute 3   : "   + "Profit = "+PROFIT_M3+", "+"Growth = "+GROWTH_M3+", "+"ATR = "+ATR_Pure_M3+", "+"High = "+HIGH_Pure_M3+", "+"Low = "+LOW_Pure_M3 +"\n"+
   "Minute 5   : "   + "Profit = "+PROFIT_M5+", "+"Growth = "+GROWTH_M5+", "+"ATR = "+ATR_Pure_M5+", "+"High = "+HIGH_Pure_M5+", "+"Low = "+LOW_Pure_M5 +"\n"+
   "Minute 10  : "   + "Profit = "+PROFIT_M10+", "+"Growth = "+GROWTH_M10+", "+"ATR = "+ATR_Pure_M10+", "+"High = "+HIGH_Pure_M10+", "+"Low = "+LOW_Pure_M10 +"\n"+
   "Minute 15  : "   + "Profit = "+PROFIT_M15+", "+"Growth = "+GROWTH_M15+", "+"ATR = "+ATR_Pure_M15+", "+"High = "+HIGH_Pure_M15+", "+"Low = "+LOW_Pure_M15 +"\n"+
   "Minute 30  : "   + "Profit = "+PROFIT_M30+", "+"Growth = "+GROWTH_M30+", "+"ATR = "+ATR_Pure_M30+", "+"High = "+HIGH_Pure_M30+", "+"Low = "+LOW_Pure_M30 +"\n"+
   "Hour 1     : "   + "Profit = "+PROFIT_H1+", "+"Growth = "+GROWTH_H1+", "+"ATR = "+ATR_Pure_H1+", "+"High = "+HIGH_Pure_H1+", "+"Low = "+LOW_Pure_H1 +"\n"+
   "Hour 3     : "   + "Profit = "+PROFIT_H3+", "+"Growth = "+GROWTH_H3+", "+"ATR = "+ATR_Pure_H3+", "+"High = "+HIGH_Pure_H3+", "+"Low = "+LOW_Pure_H3 +"\n"+
   "Hour 6     : "   + "Profit = "+PROFIT_H6+", "+"Growth = "+GROWTH_H6+", "+"ATR = "+ATR_Pure_H6+", "+"High = "+HIGH_Pure_H6+", "+"Low = "+LOW_Pure_H6 +"\n"
   );
  }

Quoting eess

Disliked

{quote} If you don't mind, I wrote this which handles only rectangles. I don't really have time or interest to develop this tool any further since I myself only use trendlines and rectangles most of the time, besides, the default MT4 magnet sensitivity has taken care of some other objects like trendline etc, so by default, trendlines has the magnet activated as what Jeanlouie has explained to you, and I don't think we can write a custom program to remove a feature which MT4 by default has, which means custom program will not be able to remove the...

Ignored

Quoting Mahir

Disliked

...new problem...

Ignored

Quoting jeanlouie

Disliked

{quote} Right you are, and I already started writing before eess gave the link, so here's mine anyway, it handles more objects that aren't covered by the link. Snap_to_OHLC_rect_hl_arr_txt_lbl - input magnet in pixels - will snap to closest ohlc within magnet - handles rectangles(all points), all arrow types, horizontal lines, texts, labels {file}

Ignored

Quoting linker26

Disliked

{quote}...set Manegt sensitivity = 0...There is no function that controls this parameter...

Ignored

Quoting jeanlouie

Disliked

{quote} As far as I'm aware it is a terminal setting and not open to programmatic control with mql4/5, so either set it to 0 to not use it or something else and just leave it as that.

Ignored

Quoting Hammertop

Disliked

{quote} Thanks very much, tintep. It looks like it has the same source code but someone modified it to add a button. I will check out the website mentioned in the code which I didn't know.

Ignored

Quoting linker26

Disliked

{quote} Dear jeanlouie, Since you have mentioned the subject, I take this opportunity to ask you a little question. Is it possible to temporarily disable magnetic sensitivity with a hotkey? the only way is to go to: Tools-->Options-->Charts--> and set Manegt sensitivity = 0 I tried to code something to disable the Manegt sensitivity, but without success. There is no function that controls this parameter. My programming knowledge is limited, and I can't think of another way to achieve it. Do you know any alternative solution? Greetings and blessings...

Ignored