Programmers needed here please | Page 2 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Programmers Interested in a Small Project Please Take a Look - Time Series Forecast 6 replies

Programmers: Simple SendMail Line. Please Help 15 replies

Indicator needs fine tuning. Programmers please help 0 replies

programmers help/advice with modding indicator needed please :) 0 replies

Programmers I'm stumped Help Me Please !! 5 replies

Attachments: Programmers needed here please
Exit Attachments

Programmers needed here please

  • #21
  • Edited 6:48am Nov 6, 2021 6:33am | Edited 6:48am
Quoting jacem
{quote} I would have wondered in the picture of the end result what you think it should be like. (Unfortunately, English is not my strength either, I use the translator a lot.) It came out to me: {image} This is the indicator: {file} Regards, FxJacem
hello dearest jacem,
it should look like the previous indicator, so every candle should equal to the total of the candle from starting of the day ,
example:
candle of hour 00:00 the reading of the indicator is : 5
candle of hour 01:00 the reading of the indicator is : 9 ,, so it should be 14 (5+9)
candle of hour 02:00 the reading of the indicator is : 13 ,, so it should be 27 (5+9+13)
and so on ... till the end of the day
and start again from the next day

and thanks alot for you support
this CS system will be the strognest
  • #22
  • Nov 7, 2021 1:32am Nov 7, 2021 1:32am
Quoting solorik
{quote} hello dearest jacem, it should look like the previous indicator, so every candle should equal to the total of the candle from starting of the day , example: candle of hour 00:00 the reading of the indicator is : 5 candle of hour 01:00 the reading of the indicator is : 9 ,, so it should be 14 (5+9) candle of hour 02:00 the reading of the indicator is : 13 ,, so it should be 27 (5+9+13) and so on ... till the end of the day and start again from the next day and thanks alot for you support this CS system will be the strognest
Hello,
Unfortunately, that's not what I meant .
Suddenly I don’t even know how the value to be displayed (on different charts) will reset at the beginning of each day. I have to think hard about this

Regards,
FxJacem
  • #23
  • Nov 7, 2021 9:54am Nov 7, 2021 9:54am
Quoting jacem
{quote} Hello, Unfortunately, that's not what I meant . Suddenly I don’t even know how the value to be displayed (on different charts) will reset at the beginning of each day. I have to think hard about this Regards, FxJacem
i can explain it more clear if you can speak arabic or can we communicate in some easier way like whatsapp or telegram
  • #24
  • Nov 7, 2021 10:03am Nov 7, 2021 10:03am
Quoting jacem
{quote} Hello, Unfortunately, that's not what I meant . Suddenly I don’t even know how the value to be displayed (on different charts) will reset at the beginning of each day. I have to think hard about this Regards, FxJacem
i mean like the previous indicator
the idea is to sum all the values of the indicator through the day and start again from the next day

and i'm sorry to make you think hard about it, but believe me it deserve, i'm working in this project for a months and you gave me the hope to complete it by helping me in the first indicator..

best regards
  • #25
  • Nov 7, 2021 3:43pm Nov 7, 2021 3:43pm
Quoting jacem
{quote} Hi Comcon! Welcome to the forum Of course we can talk about it ... Regards, FxJacem
Hi Jacem, I have an idea for an indicator combining Dual Divergence (MACD & RSI) with a specific candlestick formation on MT4 charts. I have tested the strategy retrospectively and in real-time and the results are very strong. However it requires exhaustive analysis as it is not a very frequent occurrence so I am looking to create an indicator and dashboard if possible. Would you be interested in developing this?
  • #26
  • Nov 9, 2021 12:55am Nov 9, 2021 12:55am
Quoting solorik
{quote} i mean like the previous indicator the idea is to sum all the values of the indicator through the day and start again from the next day and i'm sorry to make you think hard about it, but believe me it deserve, i'm working in this project for a months and you gave me the hope to complete it by helping me in the first indicator.. best regards
Hi Solorik!
I tried to rethink your idea.
The following result came out:
Attached Image (click to enlarge)
Click to Enlarge Name: solo2FF_chart.png Size: 51 KB


However, I was able to solve it quite complicatedly, which can be seen in the speed
(unfortunately it starts the count in the beginning of each new candle from the beginning):
Attached Image (click to enlarge)
Click to Enlarge Name: solo2FF_times.PNG Size: 5 KB


I attach the "result", maybe that's what you meant and its speed is acceptable.
Attached File(s)
File Type: ex4 solorikCS2_v2.ex4   18 KB | 288 downloads


Unfortunately, neither of us has the strength of English, but neither do Arabic - don't be mad
Regards,
FxJacem
  • #27
  • Nov 9, 2021 12:59am Nov 9, 2021 12:59am
Quoting Comcon
{quote} Hi Jacem, I have an idea for an indicator combining Dual Divergence (MACD & RSI) with a specific candlestick formation on MT4 charts. I have tested the strategy retrospectively and in real-time and the results are very strong. However it requires exhaustive analysis as it is not a very frequent occurrence so I am looking to create an indicator and dashboard if possible. Would you be interested in developing this?
Hi Comcon!
Yes, that sounds interesting.
If every detail of your idea can be described in the language of mathematics, I think it can be programmed. (Please also note that unfortunately my English is not the best.)
Regards,
FxJacem
  • #28
  • Edited 11:35am Nov 9, 2021 11:10am | Edited 11:35am
Quoting jacem
{quote} I would have wondered in the picture of the end result what you think it should be like. (Unfortunately, English is not my strength either, I use the translator a lot.) It came out to me: {image} This is the indicator: {file} Regards, FxJacem
aha ok, i revised the excell and the equations and now i know where is the mistake...
maybe it's my fault because i didn't make it clear from the beginig
we will edit on this copy solorikCS2.ex4 not the latest version
on excell:
Close (is the close of the current candle)
High/Low (is the high and the low from the beginnig of the day till the current candle) and not the High and Low of the current candle

this will eliminate the difference and the indicator should look normal
and i repeat my thanks to you, god bless you
  • #29
  • Nov 11, 2021 3:33am Nov 11, 2021 3:33am
Quoting solorik
{quote} aha ok, i revised the excell and the equations and now i know where is the mistake...
Hi solorik,

I thought a little and maybe it will be like you imagined.

I also did a script that exceled a few pieces of data so I could imagine your idea:
Attached File(s)
File Type: ex4 excelSampleToCS2.ex4   14 KB | 288 downloads

(1 minute chart works for a long time, processing 1440 x 28 candles a day )

The final result of the indicator paints the following picture:
Attached Image (click to enlarge)
Click to Enlarge Name: solorikCS2_v3pic.png Size: 95 KB


With constant use, I think there may be bugs in it at the end of the day, but a reboot should resolve this.
Attached File(s)
File Type: ex4 solorikCS2_v3.ex4   17 KB | 368 downloads


Regards,
FXJacem
  • #30
  • Nov 11, 2021 9:30am Nov 11, 2021 9:30am
Quoting jacem
{quote} Hi solorik, I thought a little and maybe it will be like you imagined. I also did a script that exceled a few pieces of data so I could imagine your idea: {file} (1 minute chart works for a long time, processing 1440 x 28 candles a day ) The final result of the indicator paints the following picture: {image} With constant use, I think there may be bugs in it at the end of the day, but a reboot should resolve this. {file} Regards, FXJacem
Dear jacem thanks alot everything is ok but why there's no reading for the curent candle
i dont want the indicator to wait fo the candle to close
i know reading my change during the candle and will constant when it close

and how can i use this script to work or the indicator will work without it
  • #31
  • Nov 11, 2021 11:19am Nov 11, 2021 11:19am
Quoting jacem
{quote} Hi solorik, I thought a little and maybe it will be like you imagined. I also did a script that exceled a few pieces of data so I could imagine your idea: {file} (1 minute chart works for a long time, processing 1440 x 28 candles a day ) The final result of the indicator paints the following picture: {image} With constant use, I think there may be bugs in it at the end of the day, but a reboot should resolve this. {file} Regards, FXJacem
dearest jacem,
can you please add an option in the indicator setting to calculate on basis of (Percentages %) instead of numbers ?! or should it be in a separate indicator
i attached it on the excell
Attached Image (click to enlarge)
Click to Enlarge Name: 3ef309053005fb14a99e6c5ead1b84a5.png Size: 62 KB
Attached File(s)
File Type: xlsx New Microsoft Excel Worksheet.xlsx   16 KB | 289 downloads
  • #32
  • Nov 17, 2021 11:21am Nov 17, 2021 11:21am
Buenas tardes..!! Mr. you are so kind in your indicator (solorikCS2_v3.ex4), include the BTC ..? so that I can also graph it Thank you.
  • #33
  • Last Post: Nov 20, 2021 4:20pm Nov 20, 2021 4:20pm
Quoting jacem
{quote} Hi Comcon! Yes, that sounds interesting. If every detail of your idea can be described in the language of mathematics, I think it can be programmed. (Please also note that unfortunately my English is not the best.) Regards, FxJacem
Yes, I believe it can. Are you familiar with the Indicator Vault website? Please review the following indicator and dashboard https://indicatorvaulthq.com/dual-divergence/ & https://indicatorvaulthq.com/dual-divergence-dashboard/. I have purchased both of these and while they work fine with the right settings, I have identified better set-ups. However, they require exhaustive analysis hence the requirement of a dashboard such as the one above. Still interested?
0 traders viewing now