Millionaire Expert (save as EA) | Page 175 | Forex Factory

Options

Go to
Permalinks
Print Thread

Related Instruments

EUR/USD, USD/NOK, Gold/USD

Similar Threads

Millionaire Run 3 replies

millionaire 3 replies

The quest to be a Millionaire 16 replies

Attachments: Millionaire Expert (save as EA)
Exit Attachments

Millionaire Expert (save as EA)

  • #3,481
  • Dec 28, 2020 9:13pm Dec 28, 2020 9:13pm
Quoting zreboo
{quote} yes it's work by click. I know about the sk1 and 4 clicks , I was thinking it will put the value of the time alone without a click from me., that will be much better. example : you want the expert set ref price after the market open by 1h and you select it then you go to sleep, So when up to this time the expert will run auto by new ref price.
Hi zreboo,

If I am understand your question correctly, Vietnamese Box is to reference a price in the past. What you seem to want is the reference a price in the future, example 1hr later. There is already a function that allows for that, you can use the "R" button to set a new reference price on the TIME you want based on T-Terminal Time or L-Local Time.

Example- Local Time = 11:09 and I want to set the new reference price to refresh at L-16:00, I will click

"R" --- "16", do ensure you select L-11:09:34 (Green).

Hope this answers your question
Attached Image (click to enlarge)
Click to Enlarge Name: 0391caacd7da3e0d61d4498e3201f1c2.png Size: 186 KB
  • #3,482
  • Dec 28, 2020 9:27pm Dec 28, 2020 9:27pm
Quoting sacredragon
{quote} Hi zreboo, If I am understand your question correctly, Vietnamese Box is to reference a price in the past. What you seem to want is the reference a price in the future, example 1hr later. There is already a function that allows for that, you can use the "R" button to set a new reference price on the TIME you want based on T-Terminal Time or L-Local Time. Example- Local Time = 11:09 and I want to set the new reference price to refresh at L-16:00, I will click "R" --- "16", do ensure you select L-11:09:34 (Green). Hope this answers your question...
Hi Scardragon, can you advice me a solution about ML% is not kept once the terminal is closed. I had setup ML% as 105 to avoid margin calls, but when I opened the terminal new orders were opened by the expert without reaching ML% of 105. I asked this to Macd-rsi, but he seems to be busy with other critical issues, so I do not want to bother him about this non-critical issue. Thanks
  • #3,483
  • Edited 10:25pm Dec 28, 2020 9:41pm | Edited 10:25pm
Quoting sacredragon
{quote} Hi zreboo, If I am understand your question correctly, Vietnamese Box is to reference a price in the past. What you seem to want is the reference a price in the future, example 1hr later. There is already a function that allows for that, you can use the "R" button to set a new reference price on the TIME you want based on T-Terminal Time or L-Local Time. Example- Local Time = 11:09 and I want to set the new reference price to refresh at L-16:00, I will click "R" --- "16", do ensure you select L-11:09:34 (Green). Hope this answers your question...
So R for future and Vietnamese Box for the past, I thought Vietnamese Box is a Timer.

Thx sacredragon for clarification .

But my idea is Better because at the specific time it's not future any more it's past so we just edit the code to put it without the fourth click.
now we click ( sk1 + 3 click and it stop ) if it future so
it may be (sk1+sk2) then click 3 click on Vietnamese Box and it will put the ref price automatic when the specific time become past.

I hope You and Mohammed got my idea.
  • #3,484
  • Dec 28, 2020 10:13pm Dec 28, 2020 10:13pm
Quoting Mt4canfx
{quote} Hi Scardragon, can you advice me a solution about ML% is not kept once the terminal is closed. I had setup ML% as 105 to avoid margin calls, but when I opened the terminal new orders were opened by the expert without reaching ML% of 105. I asked this to Macd-rsi, but he seems to be busy with other critical issues, so I do not want to bother him about this non-critical issue. Thanks
Hi Mt4canfx,

I am not sure if my solution can help, and I hope i am answering your question.

The Save Current Setting function or User Setting opening is not able to save the ML% function. To prevent unwanted orders from executing more orders after closing and reopening the expert, what I can suggest is before you Import previous saved setting function, you can consider to Turn Off Trading first. Set ML% 105, before Import-ing your previous Saved Settings and finally turning the expert on.
  • #3,485
  • Dec 28, 2020 10:36pm Dec 28, 2020 10:36pm
All two critical errors have been solved.
now OSC is very very smart, it also shows full currency name like KRW= SouthKoreanWon
Quote
Hi Scardragon, can you advice me a solution about ML% is not kept once the terminal is closed. I had setup ML% as 105 to avoid margin calls, but when I opened the terminal new orders were opened by the expert without reaching ML% of 105. I asked this to Macd-rsi, but he seems to be busy with other critical issues, so I do not want to bother him about this non-critical issue. Thanks
this is your problem, not expert problem , since expert is designed based on high degree of safety--100% safety
so no worries at all when you shut terminal then restart
after restart every thing is OFF -- including currency groups.

no problem at all to ask for solutions.

even though no need for OffTrading, you can make thefirst step to click on for ML, then do anything else.
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,486
  • Dec 28, 2020 11:51pm Dec 28, 2020 11:51pm
I restarted my system and the Software started entering new trades and didn't recognise the old trades it had before the restart. I have checked the old and new magic number and I see they are the same. Please who can I resolve this?

Screenshot after restart shown below
Attached Image (click to enlarge)
Click to Enlarge Name: Capture.PNG Size: 76 KB
i have tried to start trades with a trend, now i prefer to follow the trend
  • #3,487
  • Dec 29, 2020 12:29am Dec 29, 2020 12:29am
Quoting jereajali
I restarted my system and the Software started entering new trades and didn't recognise the old trades it had before the restart. I have checked the old and new magic number and I see they are the same. Please who can I resolve this? Screenshot after restart shown below {image}
Did you use the "AutoSave" button to save before restarting, "RESUME" button to retrieve your old settings?

If you used Save Current Setting, you will end up with repeated orders when new trades are entered
  • #3,488
  • Dec 29, 2020 12:50am Dec 29, 2020 12:50am
Quoting sacredragon
{quote} Did you use the "AutoSave" button to save before restarting, "RESUME" button to retrieve your old settings? If you used Save Current Setting, you will end up with repeated orders when new trades are entered
'


ohh!!, Didn't use those.

Thanks for the answer, but what about if the system/vps restarts on its own and I wasn't there to autosave.
i have tried to start trades with a trend, now i prefer to follow the trend
  • #3,489
  • Dec 29, 2020 1:09am Dec 29, 2020 1:09am
Hi M-R,
security against repeated clicks (sks?) would also be useful here - in case of unwanted repeated clicks due to refresh on B or S, a repeated trade will open.
See picture.
Regards.
Attached Image (click to enlarge)
Click to Enlarge Name: Clicked_cr.png Size: 231 KB
  • #3,490
  • Edited 1:41am Dec 29, 2020 1:22am | Edited 1:41am
Dear Alotaibi ,

Is this normal behaviour ,
in the box 1 below , yesterday when I import setting , I saw the expert throwing 3 orders at the same time , with same price , and I didn't discover why this happened yesterday.
Today when I run the expert and import the settings again 3 orders also were sent , they are in box number 2.
just to make sure this is normal behaviour and it is not error. for your consideration please , if it is a mistake in my settings , then for sure it is not problem.

Regards,
Edit: I post my question before I see the previous posts, may be it is duplicated question now.
Attached Image (click to enlarge)
Click to Enlarge Name: 62f8053cc9a99f35a939a3fe49a43b01.png Size: 365 KB
  • #3,491
  • Dec 29, 2020 1:41am Dec 29, 2020 1:41am
Quoting jereajali
{quote} ' ohh!!, Didn't use those. Thanks for the answer, but what about if the system/vps restarts on its own and I wasn't there to autosave.
If you are afraid that it happens, then i guess you can leave "AutoSave" function on
  • #3,492
  • Dec 29, 2020 1:44am Dec 29, 2020 1:44am
Quoting Lopuch
Hi M-R, security against repeated clicks (sks?) would also be useful here - in case of unwanted repeated clicks due to refresh on B or S, a repeated trade will open. See picture. Regards. {image}
yes brother, so we mak it red/fake --double-click instead of single click

do not forget we want also things to be easy, safety but with easeness. user how plays haphazardly, it is his resposibilty.
but final version, all fire buttons must be under mouse-clicks plus SKs

repreated click on #B, #S , one of the most ways I use in my own trading.

Now if you notice, "ONE-TIME" plus timers are under SKs

also Orange numbers must be under SKs

etc...
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,493
  • Dec 29, 2020 1:50am Dec 29, 2020 1:50am
Quoting omaramir
Dear Alotaibi , Is this normal behaviour , in the box 1 below , yesterday when I import setting , I saw the expert throwing 3 orders at the same time , with same price , and I didn't discover why this happened yesterday. Today when I run the expert and import the settings again 3 orders also were sent , they are in box number 2. just to make sure this is normal behaviour and it is not error. for your consideration please , if it is a mistake in my settings , then for sure it is not problem. Regards, Edit: I post my question before I see the previous...
yes, explained in first pages that NON BLUE TITLES, #S, #B, LS, LB cipher the setting to restart offer,
your case could happen twice:
either click on ciphering buttons, or Resume each time, with 0 orders saved. but prices make diff.

yes brother it is normal and intentional.

do not forget: expert feed terminal, not take from it.
#B =4 = expert open 4 orders, not there are 4 orders in terminal opened by expert. very bif difference.
even if 4 orders are closed we must see #B=4. to wait for 5th order.
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,494
  • Dec 29, 2020 1:52am Dec 29, 2020 1:52am
Quoting jereajali
{quote} ' ohh!!, Didn't use those. Thanks for the answer, but what about if the system/vps restarts on its own and I wasn't there to autosave.
in this case sleep calm, since with any restart everything is OFF---do not worry
when you wake up you decide.
the most saviest point is OFF, when termibal collpase.

so when our PCs undergo to distruction, this is the highest safety degree
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,495
  • Dec 29, 2020 1:54am Dec 29, 2020 1:54am
Quoting jereajali
I restarted my system and the Software started entering new trades and didn't recognise the old trades it had before the restart. I have checked the old and new magic number and I see they are the same. Please who can I resolve this? Screenshot after restart shown below {image}
no problem to resolve.

just fix your PC

OR FROM NOW AND ON, YOU KNOW BEFORE ANY NEW START, THERE ARE OLD TRIALS
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,496
  • Dec 29, 2020 1:57am Dec 29, 2020 1:57am
Through auto-save you can retain old trial process.
through script SEND, we lower internet costs.
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,497
  • Dec 29, 2020 2:01am Dec 29, 2020 2:01am
Quoting zreboo
So R for future and Vietnamese Box for the past, I thought Vietnamese Box is a Timer.
correction:
Vietnamese Box for the past and future as has been explained 3 weeks ago.
for this day: past
for coming days: future

if you do not intervene.
each day at the same hour of V-time, there will be a new Referesh
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,498
  • Dec 29, 2020 3:51am Dec 29, 2020 3:51am
Quoting Macd-rsi
{quote} correction: Vietnamese Box for the past and future as has been explained 3 weeks ago. for this day: past for coming days: future if you do not intervene. each day at the same hour of V-time, there will be a new Referesh

I think this post is very important.
  • #3,499
  • Dec 29, 2020 3:54am Dec 29, 2020 3:54am
Exness people have 117 currency , only one of them, EUX, neither Profit currency nor Margin currency--it is only a Base currency??
could you discover its pairs??

Mant strange things!!

ALL 117 EXNESS CURRENCIES
Attached Image (click to enlarge)
Click to Enlarge Name: _9890.png Size: 23 KB

H
H
H
H
each day 10%,,,, https://www.forexfactory.com/thread/1371538
  • #3,500
  • Dec 29, 2020 4:46am Dec 29, 2020 4:46am
Quoting Macd-rsi
{quote} could you tell me please how you make TP value and percentage fake green color?? is there any problem?
Hi. thank you for your patience.
Honestly, I also don't know. I tried to reproduce that same situation but can't. it looks like this now.
Attached Image
10 traders viewing now