JagzFX Free Trading Tools | Page 44 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

No Free Lunch but all the Free Coffee you can drink 736 replies

SWAP free, rollover free Broker? 15 replies

tools for easier trading with fratelli system 33 replies

All the most widely used tools = the strongest tools 5 replies

Attachments: JagzFX Free Trading Tools
Exit Attachments

JagzFX Free Trading Tools

  • #861
  • Aug 14, 2019 1:34pm Aug 14, 2019 1:34pm
Quoting jagzuk
JagzFX_EAX_Trailing_Stop + JagzFX_EAX_Trailing_Stop_Visualizer I've uploaded v1.05 to post 1. This version adds 3 new features: When using breakeven, you can now set Breakeven Offset & Breakeven Trigger levels. The PIN will not set a trail until the profit reaches the trigger level, at which point it will move the trail to the breakeven price plus the specified offset. From there, trailing will follow your configured mode and settings. For ATR mode, you can now set the ATR Ratio. E.g. 0.25 * Daily ATR. Finally, there is a setting called Keep TSL...
Hi Jagz
i installed TrailingStop Pin with below settings. also i added Trailing_Stop_Visualizer with same pin number of TrailingStop. but when i click on (~) i can't see any ATR trailingstop on new chart. what am i doing wrong, sir?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 44 KB


Thank you
  • #862
  • Aug 14, 2019 3:43pm Aug 14, 2019 3:43pm
Quoting Lazar83
Hello Jagzuk, can u extract from mrdfx system , one pin only for mbfx timing indicator. Had a awesome run with it previous year manually . Idea is that pin be generated when ever color changes to green for buy to to red for sell. basicly dasbord will generate signal every time when color is printed. In chopy markets u can get lots of noise. I solved it by taking only green color below 30 for buy and red color above 70 for sell,but missed lots of good trades. If possible pin should have 2 options, give signal every color green or red, or give signal...
Hi, thank you for clarifying that. Currently I am working on this MBFX pin and it will have options that you ask. Check the EAX thread soon
Soli Deo honor et gloria... - 1 ad Timotheum 1:17
  • #863
  • Aug 14, 2019 4:02pm Aug 14, 2019 4:02pm
Quoting paroucia
{quote} Hi Jagz i installed TrailingStop Pin with below settings. also i added Trailing_Stop_Visualizer with same pin number of TrailingStop. but when i click on (~) i can't see any ATR trailing stop on new chart. what am i doing wrong, sir? {image} Thank you
When you click (~) to open a chart, you need to add the visualizer to that chart (add it to your template so its added automatically).
There must be open trades on the chart to see the TSL levels.
Check Global Variables for a pair that has open trades, if you see values in the TStart variable, then trailing-stop is working.

If you are still having problems, then please post shots of your EAX setup, visualizer setup, and the global variables.
Always read Post #1
  • #864
  • Aug 15, 2019 12:15am Aug 15, 2019 12:15am
Quoting jagzuk
{quote} When you click (~) to open a chart, you need to add the visualizer to that chart (add it to your template so its added automatically). There must be open trades on the chart to see the TSL levels. Check Global Variables for a pair that has open trades, if you see values in the TStart variable, then trailing-stop is working. If you are still having problems, then please post shots of your EAX setup, visualizer setup, and the global variables.
Thank You Jagz, It worked : )
  • #865
  • Aug 22, 2019 1:55am Aug 22, 2019 1:55am
Quoting jagzuk
{quote} Hey Lee, Yup, this is something different ... I am on a family vacation for the next 2 weeks, but I will give it some thought. Jagz
Jagz,

Have you had some time to look at the possibilities of a PIN Profit Visualizer? Would greatly appreciate!

Lee
Fix your thoughts on what is true, and honorable, and right, and pure...
  • #866
  • Sep 3, 2019 11:02am Sep 3, 2019 11:02am
Hi jagzuk
Can you explain to me how to use the options on the figure ????
Attached Image
Small thoughts can be the beginning of great transformations.
  • #867
  • Sep 6, 2019 11:48am Sep 6, 2019 11:48am
Quoting rezaaly
Hi jagzuk Can you explain to me how to use the options on the figure ???? {image}
Hi,

The BreakEven (BE) settings were introduced and explained in v1.05. See Post #112. These settings are only used when Move to Breakeven is set to true. In the example shown in your screenshot, when the profit reaches 100 points (the Trigger), the PIN will lock in 10 points.

The Trail Points / Indicator Offset is explained in the original post in the Dashboard EAX forum. See Post #4,673.
How this setting works depends on the Trailing Stop Mode. If you are trailing by Points, then this setting simply set the trail distance. In the screenshot the PIN is set to trail at 200 points. If you are using an indicator, such as Moving Average, then these points are added to the indicator value as an Offset. e.g. MA value + 200 points. If you just want the pure value of the indicator, set Indicator Offset to 0.

Regards
Jagz
Always read Post #1
  • #868
  • Sep 6, 2019 11:30pm Sep 6, 2019 11:30pm
Quoting jagzuk
{quote} Hi, The BreakEven (BE) settings were introduced and explained in v1.05. See Post #112. These settings are only used when Move to Breakeven is set to true. In the example shown in your screenshot, when the profit reaches 100 points (the Trigger), the PIN will lock in 10 points. The Trail Points / Indicator Offset is explained in the original post in the Dashboard EAX forum. See Post #4,673....

Thanks a lot jagzuk
From your helpful explanations. good luck.
Small thoughts can be the beginning of great transformations.
  • #869
  • Sep 8, 2019 12:59pm Sep 8, 2019 12:59pm
Hello, how does it work, where can I see the instructions?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_311.png Size: 192 KB
  • #870
  • Edited 6:53pm Sep 14, 2019 6:27pm | Edited 6:53pm
Quoting jagzuk
{quote} Hi jposmak, I am not going to code a wish-list of PINs without some more background. E.g. - what do the give us that we cannot get from existing PINS or EAX modules? - what rules do you have to use them in your strategies? Also, I am a bit suspicious of the HPF indicator. The Hodrick-Prescott Filter (HPF) is considered by some to be misleading, or at least no better than other trend indicators: see https://econweb.ucsd.edu/~jhamilto/hp.pdf

Hi Bruv, have you tried Momentum onchartsignals Indicator? I have uploaded V1&2. Please convert this to PIN i beg you, it doesn't repaint after identifying a bar. Try this on your chart to see if its worth it. Thanks bruv.

Attached File(s)
File Type: ex4 #Momentum onChartSignals Indicator v1.0.ex4   20 KB | 271 downloads
Attached File(s)
File Type: mq4 #Momentum onChartSignals Indicator v1.0.mq4   7 KB | 286 downloads
Attachment 4
Attached File(s)
File Type: mq4 #Momentum onChartSignals Indicator v2.0.mq4   14 KB | 376 downloads
If it works for you, don't forget to help others.
  • #871
  • Sep 15, 2019 4:36am Sep 15, 2019 4:36am
Quoting walesamuel
{quote} Hi Bruv, have you tried Momentum onchartsignals Indicator? I have uploaded V1&2. Please convert this to PIN i beg you, it doesn't repaint after identifying a bar. Try this on your chart to see if its worth it. Thanks bruv. {file}{file}3439851{file}
Hi.

Thank you for bringing this to my attention.

At first glance, the signals on this indicator look amazing good ... which always makes me suspicious!

It's Sunday and the markets are closed, so I cannot directly observe its behaviour. However, I ran a visual backtest as shown below. Whilst the arrows do not disappear once drawn, they can appear at the start of a candle and then slide position as the candle increases in length. Also, I am seeing an overload of false signals ... see all those blue buy signals in an obvious downtrend, followed by red sell signals in an uptrend.

Of course, it may behave differently on a live chart, but that begs the question why?
Have you used this indicator for trading yet?

Regards
Jagz

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 81 KB
Always read Post #1
  • #872
  • Sep 15, 2019 4:58am Sep 15, 2019 4:58am
Quoting jagzuk
{quote} Hi. Thank you for bringing this to my attention. At first glance, the signals on this indicator look amazing good ... which always makes me suspicious! It's Sunday and the markets are closed, so I cannot directly observe its behaviour. However, I ran a visual backtest as shown below. Whilst the arrows do not disappear once drawn, they can appear at the start of a candle and then slide position as the candle increases in length. Also, I am seeing an overload of false signals ... see all those blue buy signals in an obvious downtrend, followed...
If same chart with a fresh instance that backtest chart don't show same arrows ( only shows the best point ) then it's a repainter. Your explanation after backtest let clear this behavior. All tools search swings have that effect. All intermediate fake signals are cleared. Its limitation of algorithms ( natural behavior )

My opinion is clear. If tool not paints always same then is waste time try use it...

PS: i agree with you when i see something so perfect in chart i feel have trick...
Try don't lose pants never...
  • #873
  • Sep 15, 2019 6:13am Sep 15, 2019 6:13am
Quoting jagzuk
{quote} Hi. Thank you for bringing this to my attention. At first glance, the signals on this indicator look amazing good ... which always makes me suspicious! It's Sunday and the markets are closed, so I cannot directly observe its behaviour. However, I ran a visual backtest as shown below. Whilst the arrows do not disappear once drawn, they can appear at the start of a candle and then slide position as the candle increases in length. Also, I am seeing an overload of false signals ... see all those blue buy signals in an obvious downtrend, followed...
I have observed this indicator in live markets which doesn't give signals similar to the backtest you have uploaded. I am suggesting that you try it tomorrow and use 1HR timeframe which could also make it behave differently.
If it works for you, don't forget to help others.
  • #874
  • Sep 15, 2019 7:19am Sep 15, 2019 7:19am
Quoting klided
Hello, how does it work, where can I see the instructions? {image}
Hi,

In the first post of this thread, I list all my PINS with links to older versions.
It is worth checking the older links so you get the whole history of the PIN, which may have more instructions.

When you first load one of my PINS, it will default to channel 0 (Signal PIN #).
For the signals to show in EAX, you will need to set each of the PINS on a new channel, e.g. 2, or 3.

The CMSM PIN requires the CMSM indicator.
See my post on the first version of this PIN https://www.forexfactory.com/showthr...1#post10894901.
You will need to obtain the latest version of the indicator, and make sure that the indicator ID (separate to the Signal PIN #) is set the same in the indicator and the PIN .

Jagz
Always read Post #1
  • #875
  • Sep 16, 2019 11:41am Sep 16, 2019 11:41am
Great Master JAgzuk Congratulations for your work.!
I have tested your PINS for my strategies!
Goatria wondered if to use STOCH as this figure, what would be the setting? would you use Stoch PIN or Stochlive PIN?

Attached Image (click to enlarge)
Click to Enlarge Name: usdjpym15_orig.jpg Size: 76 KB
  • #876
  • Sep 17, 2019 1:14am Sep 17, 2019 1:14am
Quoting brunocsl
Great Master JAgzuk Congratulations for your work.! I have tested your PINS for my strategies! Goatria wondered if to use STOCH as this figure, what would be the setting? would you use Stoch PIN or Stochlive PIN? {image}
Hi, I have not tested stochastics, so I do not have any useful advice.
Always read Post #1
  • #877
  • Sep 19, 2019 12:59pm Sep 19, 2019 12:59pm
Quoting walesamuel
{quote} I have observed this indicator in live markets which doesn't give signals similar to the backtest you have uploaded. I am suggesting that you try it tomorrow and use 1HR timeframe which could also make it behave differently.
Hi walesamuel,

I have done as you suggested, and I have also reviewed the code of the indicator ...

My conclusion is that this indicator is designed to show a perfect history, but does not provide a useful signal in a live market.

One of the reasons lies in the code. Wherevever you see a line of code like this:

Inserted Code
for(int i = 0; i < limit; i++)

This is a program loop where the indicator starts with the most recent candle (i = 0) and them works back through all the candles in the chart (the limit). The important fact is that the indicator is working backwards from the present time, and so can paint a perfect picture. This is the programming equivalent of painting-by-numbers: the shape already existed, the indicator is not creating the picture, just colouring it in.

This is not surprising. Technical indicators can only tell us about how the market has moved, not how it will move.

Best regards
Jagz
Always read Post #1
  • #878
  • Sep 19, 2019 1:04pm Sep 19, 2019 1:04pm
Quoting jagzuk
{quote} Hi walesamuel, I have done as you suggested, and I have also reviewed the code of the indicator ... My conclusion is that this indicator is designed to show a perfect history, but does not provide a useful signal in a live market. One of the reasons lies in the code. Wherevever you see a line of code like this: for(int i = 0; i < limit; i++) This is a program loop where the indicator starts with the most recent candle (i = 0) and them works back through all the candles in the chart (the limit). The important fact is that the indicator is...
Good man you are Jagz. I wanna appreciate the time spent reviewing this.

What PINs are you specifically using?
If it works for you, don't forget to help others.
  • #879
  • Sep 24, 2019 12:37pm Sep 24, 2019 12:37pm
Hi Jagz, thank you very much for all the past efforts you have taken to develop free tools for FF community. Im using MUX in my every test setups.

I need another help to make pinable bellow attached Binary Reaper indicator. this is a non-repainting indi and based on Aroon Oscilator. Levitivus in the EAX thread has created a pin for Arron Oscillator. Aroon Osc and Binary Reaper shows same results but I need to get signals for Binary Reaper Arrow only. please check...!

Regards.
Attached File(s)
File Type: mq4 aroon oscillator alerts.mq4   4 KB | 358 downloads
File Type: ex4 Binary-Reaper.ex4   14 KB | 310 downloads
File Type: mq4 Binary-Reaper.mq4   4 KB | 377 downloads
"Don't Predict, Do react"
  • #880
  • Sep 24, 2019 12:54pm Sep 24, 2019 12:54pm
Quoting belie
Hi Jagz, thank you very much for all the past efforts you have taken to develop free tools for FF community. Im using MUX in my every test setups. I need another help to make pinable bellow attached Binary Reaper indicator. this is a non-repainting indi and based on Aroon Oscilator. Levitivus in the EAX thread has created a pin for Arron Oscillator. Aroon Osc and Binary Reaper shows same results but I need to get signals for Binary Reaper Arrow only. please check...! Regards. {file} {file} {file}
please see attached snap.
Attached Image (click to enlarge)
Click to Enlarge Name: Untitled-1.jpg Size: 295 KB
"Don't Predict, Do react"
2 traders viewing now