JagzFX Free Trading Tools | Page 14 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

No Free Lunch but all the Free Coffee you can drink 736 replies

SWAP free, rollover free Broker? 15 replies

tools for easier trading with fratelli system 33 replies

All the most widely used tools = the strongest tools 5 replies

Attachments: JagzFX Free Trading Tools
Exit Attachments

JagzFX Free Trading Tools

  • #261
  • Mar 13, 2018 5:51pm Mar 13, 2018 5:51pm
Quoting jagzuk
{quote} JagzFX_EAX_MUX_v1_00 PIN Multiplexer OK PIN junkies ... I hear you! ... this Multiplexer (MUX) will let you combine multiple PINs onto one EAX channel. This is a bit of a rush job so apologies for any bugs and it only has one signal condition: ALL enables signals must be the same to get an output (i.e. it does not have the ANY condition ... yet). However, I have allowed for reversal of each input signal, and reversal of the overall output signal which might be useful in you need to flip one of the PINs. As always ... download is in Post...
Amazing
Me thinks I should sleep more often ... the wake up surprises just keep coming ...
Thank you ... greatly appreciated!!!
When you are successful perhaps give a thought to others ... Kiva dot org
  • #262
  • Mar 13, 2018 5:55pm Mar 13, 2018 5:55pm
Quoting jagzuk
This thread is a place to share and support my various dashboard PINS and other trading tools. My tools are non-commercial and free to use on demo and live accounts - but use them live at your own risk! Please: No commercial activity or spamming. Dashboard EAX PINS These are signal PINs for Dashboard EAX by aeseme. Before trying to use these PINS please read the Dashboard EAX...

Hello Jagzuk,
I have downloaded the indicators: JagzFX_EAX_ADX, TDI, and Mux, but they do not show on my chart. Any help is appreciated.

Thanks
  • #263
  • Mar 13, 2018 7:06pm Mar 13, 2018 7:06pm
Quoting jagzuk
{quote} JagzFX_EAX_MUX_v1_00 PIN Multiplexer OK PIN junkies ... I hear you! ... this Multiplexer (MUX) will let you combine multiple PINs onto one EAX channel. This is a bit of a rush job so apologies for any bugs and it only has one signal condition: ALL enabled inputs must be the same to get an output (i.e. it does not have the ANY condition ... yet). However, I have allowed for reversal of each input signal, and reversal of the overall output signal which might be useful in you need to flip one of the PINs. As always ... download is in Post #1....
Excellent, thank you jagzuk, working perfectly
TTFN Merlyn
  • #264
  • Mar 13, 2018 7:38pm Mar 13, 2018 7:38pm
Quoting jagzuk
{quote} JagzFX_EAX_MUX_v1_00 PIN Multiplexer OK PIN junkies ... I hear you! ... this Multiplexer (MUX) will let you combine multiple PINs onto one EAX channel. This is a bit of a rush job so apologies for any bugs and it only has one signal condition: ALL enabled inputs must be the same to get an output (i.e. it does not have the ANY condition ... yet). However, I have allowed for reversal of each input signal, and reversal of the overall output signal which might be useful in you need to flip one of the PINs. As always ... download is in Post #1....
Again many thanks ... your response soooo fast
See results below, Normal tick, Reverse tick, Disabled ?
Now going to test TDI with various settings and report back.
Normal
Attached Image

Reversed
Attached Image

Disabled
Attached Image
When you are successful perhaps give a thought to others ... Kiva dot org
  • #265
  • Mar 13, 2018 10:15pm Mar 13, 2018 10:15pm
Quoting jagzuk
{quote} JagzFX_EAX_MUX_v1_00 PIN Multiplexer OK PIN junkies ... I hear you! ... this Multiplexer (MUX) will let you combine multiple PINs onto one EAX channel. This is a bit of a rush job so apologies for any bugs and it only has one signal condition: ALL enabled inputs must be the same to get an output (i.e. it does not have the ANY condition ... yet). However, I have allowed for reversal of each input signal, and reversal of the overall output signal which might be useful in you need to flip one of the PINs. As always ... download is in Post #1....
Great job! It would be nice to add the priority of the pin, for example to exit - and use all the known here trailing stop pin!
  • #266
  • Mar 14, 2018 1:43am Mar 14, 2018 1:43am
Quoting rushamg
{quote} Great job! It would be nice to add the priority of the pin, for example to exit - and use all the known here trailing stop pin!
Hi, How would pin priority work? Could you give more detail ... thanks!
Always read Post #1
  • #267
  • Mar 14, 2018 4:24am Mar 14, 2018 4:24am
Quoting PayItForward
{quote} Again many thanks ... your response soooo fast See results below, Normal tick, Reverse tick, Disabled ? Now going to test TDI with various settings and report back. Normal {image} Reversed {image} Disabled {image}
Hi, if you disable all the inputs you will get a constant sell signal. It's just the way the internal logic is coded at the moment. I didn't worry about it because I could not see any point to using the Mux with all the inputs disabled!
Always read Post #1
  • #268
  • Mar 14, 2018 4:59am Mar 14, 2018 4:59am
This is what I intend testing for TDI ... and am looking for anything I have missed and any extra input ...
I see little sense in multiple people testing exactly the same settings (making the most of our resources) ... assuming we trust each other for accuracy of reporting.
I see no reason to duplicate the work juraia has done other than to comment that looking at the pip gain is disproportionate as there are multiple trades 0.01 to 0.02 on the same pair. (assuming you look at the pip count versus the dollar, as pip is more accurate)
That said the standard Dean Malone setting
RSI_Period = 13;
extern int RSI_Price = 0;
extern int Volatility_Band = 34;
extern int RSI_Price_Line = 2;
extern int RSI_Price_Type = 0;
extern int Trade_Signal_Line = 7;
extern int Trade_Signal_Type = 0
configuration as mentioned previously is different to the specs for Davit, see below:
RSI_Period = 8;
extern int RSI_Price = 0;
extern int Volatility_Band = 34;
extern int RSI_Price_Line = 2;
extern int RSI_Price_Type = 0;
extern int Trade_Signal_Line = 5;
extern int Trade_Signal_Type = 0
As jagzuk has used TDI Red Green as an internal code ... that is set to Dean Malone specs.
To compare with Davit we should use the TDI specs (TDI Red Green), modified to reflect Davit specs as above and test with a separate Magic #.
Then we are doing a "head to head" with the specs and provided that all tests start and finish at the same time we should get an accurate comparison.
I would appreciate any comments or additions prior to start of testing please, anticipated Thursday or Friday
Thanks
When you are successful perhaps give a thought to others ... Kiva dot org
  • #269
  • Edited 8:59am Mar 14, 2018 6:25am | Edited 8:59am
Quoting PayItForward
As jagzuk has used TDI Red Green as an internal code ... that is set to Dean Malone specs. To compare with Davit we should use the TDI specs (TDI Red Green), modified to reflect Davit specs as above and test with a separate Magic #.
JagzFX_EAX_TDI_MTF_v1_06
Hi, I have just uploaded this to Post #1.

2 minor changes:

Firstly, I have added settings for the TDI calculation (as required above);

Secondly, I changed the TDI modes to be closer to those used in the jaisis PIN. The difference is that the PIN now checks if the MarketBase (Yellow) is oversold/overbought (>68/<32). So, for example in Scalping, you won't get a buy signal if the market is overbought. I also renamed Conservative mode to Moderate mode, aligning with the jaisis PIN to reduce any confusion.

I'm looking forward to your test results ...
Always read Post #1
  • #270
  • Mar 14, 2018 6:54am Mar 14, 2018 6:54am
Quoting jagzuk
{quote} JagxFX_EAX_TDI_MTF_v1_06 Hi, I have just uploaded this to Post #1. 2 minor changes: Firstly, I have added settings for the TDI calculation (as required above); Secondly, I changed the TDI modes to be closer to those used in the jaisis PIN. The difference is that the PIN now checks if the MarketBase (Yellow) is oversold/overbought (>68/<32). So, for example in Scalping, you won't get a buy signal if the market is overbought. I also renamed Conservative mode to Moderate mode, aligning with the jaisis PIN to reduce any confusion. I'm looking...
Once again coding mods attacked faster than a lightning strike ... thanks jagzuk!
Will test Thursday my time ...
Cheers
When you are successful perhaps give a thought to others ... Kiva dot org
  • #271
  • Mar 14, 2018 7:03am Mar 14, 2018 7:03am
Quoting maxwell-eqtn
{quote} Hello Jagzuk, I have downloaded the indicators: JagzFX_EAX_ADX, TDI, and Mux, but they do not show on my chart. Any help is appreciated. Thanks
Hi, were you able to resolve your problem?
Always read Post #1
  • #272
  • Mar 14, 2018 8:54am Mar 14, 2018 8:54am
Quoting jagzuk
{quote} JagxFX_EAX_TDI_MTF_v1_06 Hi, I have just uploaded this to Post #1. 2 minor changes: Firstly, I have added settings for the TDI calculation (as required above); Secondly, I changed the TDI modes to be closer to those used in the jaisis PIN. The difference is that the PIN now checks if the MarketBase (Yellow) is oversold/overbought (>68/<32). So, for example in Scalping, you won't get a buy signal if the market is overbought. I also renamed Conservative mode to Moderate mode, aligning with the jaisis PIN to reduce any confusion. I'm looking...
Thanks, jagzuk! We will test it, of course.
  • #273
  • Edited 2:17pm Mar 14, 2018 9:54am | Edited 2:17pm
Quoting PayItForward
... than to comment that looking at the pip gain is disproportionate as there are multiple trades 0.01 to 0.02 on the same pair. (assuming you look at the pip count versus the dollar, as pip is more accurate) ...
The difference is that I have set up EAX to open 21 deals. The idea is to start with a $ 300-500 account with a higher risk. With 21 deals open, my margin is between 110 and 156. Depending on which couples received a first signal and who were in profit after 15 minutes to open a second deal. For this reason, pairs with CHF have been removed. It's a big margin for them with my broker. Saturday and Sunday will analyze which couples have performed worse in LO. I'll compare them to last week. There will be couples who have been bad 1st and second place in LO. Today I think I made the TO decision not to trade. Very large DD, barely recover half through LO. I closed manually to have time with new signals and new deals across NY.
The initial idea was to make 50-100 pips in TO and 150 to 200 in LO. But I have to distribute the pairs in sessions. Naturally, it depends on many things, just how much you will be on a profit or loss. Everything ends before the news or the beginning of NY. If you manage to accumulate amounts on the balance sheet, you will also reduce the risk. I decide when to win the profit or loss.
So, I do not have standard rules for all days. I'm just trying to explain as much as I can. But if you decide to start with a 1000 account and CHF is good at you, the trade volume rule is changing. For example, 3 deals per pair.
I do not rely on semi-automatic trade. There is no way to rely on a full automatic.

Разликата идва от това, че съм настроил EAX да отвори 21 сделки. Идеята е да се започне със сметка 300 - 500$ с по-голям риск. При отворени 21 сделки, марджина при мен е между 110 и 156. В зависимост от, кои двойки са получили първи сигнал и кои са били в печалба след 15 мин., за да им се отвори втора сделка. По тази причина са махнати двойките със CHF. Много голям е марджина за тях при моя брокер. Събота и неделя ще анализирам, кои двойки са се представили най-лошо в LO. Ще ги сравня с миналата седмица. Ще отпаднат двойки, които 1-во са били зле и 2 второ не им е мястото в LO. Днес мисля, че взех решение TO да не се търгува. Много голям DD, едвам възстанови половината през LO. Затворих ръчно, за да има време с нови сигнали и нови сделки през NY.
Първоначалната идея беше, да се правят 50-100 пипа в TO и 150 - 200 в LO. Но трябва да разпределя двойките по сесии. Естествено зависи от много неща, колко точно ще си на печалба или загуба. Всичко да приключва преди новините или началото на NY. Ако успяват да се натрупват суми по баланса, ще намалява и риска. Аз решавам, кога да прибера печалбата или загубата.
Така, че аз нямам стандартни правила за всички дни. Опивам се да обясня максимално какво правя аз. Но ако решиш да стартираш с 1000 сметка и CHF е добре при вас, спокойно се променя правилото за обема на търговия. Примерно 3 сделки на двойка.
Аз на полуавтоматична търговия не разчитам. Няма как да разчитам на пълен автомат.
  • #274
  • Mar 14, 2018 8:26pm Mar 14, 2018 8:26pm
Quoting juraia
{quote} The difference is that I have set up EAX to open 21 deals.
Thanks for the explanation, appreciated.
My tests to date ...
All 28 pairs are being used even though Davit uses predominately lower ADR pairs.
I have started with evaluation of TDI - Dean Malone settings versus Davits.
Time started Midnight for me (really timing for this testing is irrelevant at the moment)
Because no trend or part thereof has been manually checked before any of the trades are opened some may start at the beginning, some part way through and some towards the end of a mini trend within the ranges (Pivots). For that reason I expected the possibility of a significant DD.
At the 11 hr point there is very little between the number of pairs actioned however there is a significant difference on the Pip High result.
As you can see below:

  1. Dean Malone set = Max 102 Pips
  2. Davit set = Max 256 Pips

Note: You will see 4 Pins highlighted, Pin 3 & Pin 4 are irrelevant - they show because my next step is to determine entry direction within the ranges.
There are no multiple trades taken so by using SOH this could be significantly increased.

Attached Image (click to enlarge)
Click to Enlarge Name: TDI Dean 11hr.png Size: 281 KB

Attached Image (click to enlarge)
Click to Enlarge Name: TDI Davit 11hr.png Size: 277 KB
When you are successful perhaps give a thought to others ... Kiva dot org
  • #275
  • Mar 14, 2018 8:33pm Mar 14, 2018 8:33pm
The above post is really step 2 of the process, we need to have a PIN for the FibPivots setup as per previous post and below.
Juraia kindly provided a .mq4 which could be the starting point with the recalculations, I have looked at it and am trying to make the changes but I am the first to admit that I am not a coder so any assistance would be greatly appreciated.
Fibonacci Pivot Point
R4 = PP + ((High – Low) x 1.000)
R3 = PP + ((High – Low) x .786)
R2 = PP + ((High – Low) x .618)
R1 = PP + ((High – Low) x .382)

PP = (H + L + C) / 3

S1 = PP – ((High – Low) x .382)
S2 = PP – ((High – Low) x .618)
S3 = PP – ((High – Low) x .786)
S4 = PP – ((High – Low) x 1.000)

C – Closing Price, H – High, L – Low
When you are successful perhaps give a thought to others ... Kiva dot org
  • #276
  • Mar 15, 2018 1:54am Mar 15, 2018 1:54am
Quoting PayItForward
{quote} ... Note: You will see 4 Pins highlighted, Pin 3 & Pin 4 are irrelevant - they show because my next step is to determine entry direction within the ranges. There are no multiple trades taken so by using SOH this could be significantly increased.
Sorry for my bad English but I did not understand what SOH is and what are the other 2 pins?

Извинявай за моя лош английски, но не разбрах какво е SOH и кои са другите 2 пина?
  • #277
  • Mar 15, 2018 2:12am Mar 15, 2018 2:12am
Quoting juraia
{quote} Sorry for my bad English but I did not understand what SOH is and what are the other 2 pins? Извинявай за моя лош английски, но не разбрах какво е SOH и кои са другите 2 пина?
SOH - I Think that refers to the Sit-On-Hands settings in EAX.
Always read Post #1
  • #278
  • Mar 15, 2018 2:12am Mar 15, 2018 2:12am
Quoting juraia
{quote} Sorry for my bad English but I did not understand what SOH is and what are the other 2 pins? Извинявай за моя лош английски, но не разбрах какво е SOH и кои са другите 2 пина?
No need for any apology ... SOH = Sit On Hands (EAX feature). I am sure you will know it now, wont use acronyms in future.
The other 2 Pins as stated were not used, during this testing it is simply TDI only.
Those Pins I will use shortly to help define any trend during the range period and see if that improves the results.
I believe that you use MA's according to your previous post MA 13 & MA 21 (not sure whether you use Simple or EMA - please confirm MA settings you use)
Results for the test to date below.
As you can see one has increased Max Pips by
GMT 0540 Max 130 = Increase 20
Attached Image

GMT 0515 Max 370 = Increase 120
Attached Image

If the cycle holds true the next max should be around 09:00-10:00 GMT ... we will see what happens ... CHF hot news excepted
When you are successful perhaps give a thought to others ... Kiva dot org
  • #279
  • Mar 15, 2018 2:14am Mar 15, 2018 2:14am
Quoting PayItForward
The above post is really step 2 of the process, we need to have a PIN for the FibPivots setup as per previous post and below.
It's on the to do list ... hopefully ready in few days.
Always read Post #1
  • #280
  • Mar 15, 2018 3:36am Mar 15, 2018 3:36am
Quoting jagzuk
{quote} It's on the to do list ... hopefully ready in few days.
Many thanks Sir ... appreciated ... hopefully we may be able to then, to move to a more profitable level
When you are successful perhaps give a thought to others ... Kiva dot org
0 traders viewing now