EA- 35 Period 4hr Moving Average For All Pairs

Thank you. Sorry, what's OOTB?

when you place ea on chart and don't change the inputs is ootb

I'm really not a newbie, but I never heard that, thank you again.

OOTB=Out of the Box meaning default settings with no changes...

How often the EA trades and what is the recommended account size per 0.01 lot if to run all pairs. and is there away of backtesting it

Thanks candyman. I can compile the code now and will test it.
Btw, as you mentioned in #1 to attach ea to XAUUSD, will ea work if I attach to other currency pair chart?

Just read the title of this thread

candyman, how do you handle red news?

Hi candyman, thanks very much for sharing this. I tested your EA today and so far it opened and closed two BUY 0.01 trades today (GBPUSD, EURUSD) within 20mins, both closed with profit of $1.16 and $0.48. Another 3 trades (EURUSD, GBPUSD, NZDUSD) are ongoing and each of them are ITM.

Looks promising, may I ask if this EA can withstand high volatility conditions, or when major news is out.

Perhaps if you can explain the logic of your EA in better details that will be great in helping me to understand its workings.

Thanks again, I am new to FF and it's nice to experience little Green Pips on the 2nd day of my membership here!

Cheers!

https://www.mql5.com/en/signals/390160
doing forward testing .when I started tthe ea it was able to open sell trades but now I see buys.

This EA is placed on one chart and then trades all other pairs. This is to save you opening 28 charts. The EA is placed pair you don't want traded then in the input section of EA you will see a part xauusd change that to what pair you choose . This EA trades forex pairs. YOU ONLY NEED TO PLACE ON ONE CHART YOU DON'T WANT TO TRADE

no stress bro its fine to ask OOTB=Out of the Box meaning default settings with no changes

i leave the trades open to face news

i wrote code to when price is above moving average buy.vice versa for sell. but i don't know why it is not taking sell trades. what has surprised me is it is rakinng in healthy profit. $35 on 0.01 lot with 10 % draw down is good .

if you look at the code in the EA and mathematics was not a problem you understand its workings
the logic below
///xxxxxxxacececerere cuurve pozapoza
if (SMA7A4H > SMA7AD1 )if( chighD1A > SMA7A4H )if( copenD1A > SMA7AD1)
if (SMA3A4H > SMA7A1H )if(SMA7A1H > SMA7AM30)
if (SMA7A4H -SMA7AD1> NormalizeDouble(30/factor,Digits))
if (SMA7AD1 - clowD1A > NormalizeDouble(30/factor,Digits))
if (Bid > SMA7AD1)if (Bid > SMA3A4H)if (Bid > SMA7A1H)if (Bid > SMA7AM30)
if(Bid > SMA15A4H - NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
///xxxxxxxacececerere cuurve pozapoza
if (SMA7A4H < SMA7AD1 )if( clowD1A < SMA7A4H )if( copenD1A < SMA7AD1)
if (SMA3A4H < SMA7A1H )if(SMA7A1H < SMA7AM30)
if (SMA7AD1 - SMA7A4H > NormalizeDouble(30/factor,Digits))
if (chighD1A - SMA7AD1 > NormalizeDouble(30/factor,Digits))
if(Ask < SMA15A4H + NormalizeDouble(7/factor,Digits))
if (Ask < SMA7AD1)if (Ask < SMA3A4H)if (Ask < SMA7A1H)if (Ask < SMA7AM30)
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
///xxxxxxxacececerere cuurve ballzakzak
if (SMA7AD1 > SMA7A4H )if( SMA7A4H > SMA7A1H)if( SMA7A4H > SMA7AM30)
if (SMA7AD1 - clowD1A > NormalizeDouble(100/factor,Digits))
if (SMA7A4H - clowD1A > NormalizeDouble(50/factor,Digits))
if (Bid > SMA7A4H)if (Bid > SMA7A1H)if (Bid > SMA7AM30)
if(Bid > SMA15A4H - NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
///xxxxxxxacececerere cuurve ballzakzak
if (SMA7AD1 < SMA7A4H )if( SMA7A4H < SMA7A1H)if( SMA7A4H < SMA7AM30)
if (chighD1A - SMA7AD1 > NormalizeDouble(100/factor,Digits))
if (chighD1A -SMA7A4H > NormalizeDouble(50/factor,Digits))
if (Ask < SMA7A4H)if (Ask < SMA7A1H)if (Ask < SMA7AM30)
if(Ask < SMA15A4H + NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
///xxxxxxxacececerere cuurve ballxaxaxa
if (SMA7H4H > SMA7BD1)if( SMA3A4H < SMA7A4H)if(SMA3H4H > SMA7H4H)
if (chighD1B - clowD1B > NormalizeDouble(70/factor,Digits))
if (SMA7H4H - clowD1B > NormalizeDouble(50/factor,Digits))
if (chighD1B > SMA7H4H)
if (Bid > SMA7A4H)if (Bid > SMA7A1H)if (Bid > SMA7AM30)
if(Bid > SMA15A4H - NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
///xxxxxxxacececerere cuurve ballxaxaxa
if (SMA7H4H < SMA7BD1)if( SMA3A4H > SMA7A4H)if(SMA3H4H < SMA7H4H)
if (chighD1B - clowD1B > NormalizeDouble(70/factor,Digits))
if (chighD1B -SMA7H4H > NormalizeDouble(50/factor,Digits))
if ( clowD1B < SMA7H4H)
if (Ask < SMA7A4H)if (Ask < SMA7A1H)if (Ask < SMA7AM30)
if(Ask < SMA15A4H + NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
///xxxxxxxacececerere cuurve ball
if(SMA7Z4H > SMA7DD1)if(SMA7Z4H < SMA7DD1 - NormalizeDouble(100/factor,Digits))
if(SMA7AM30 > SMA7A1H)if(SMA7A1H > SMA7A4H)if(Bid > SMA7A4H + NormalizeDouble(40/factor,Digits))
if(clowH1A < SMA7AM30)
if(Bid > SMA15A4H - NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
///xxxxxxxacececerere cuurve ball
if(SMA7Z4H < SMA7DD1)if(SMA7Z4H > SMA7DD1 + NormalizeDouble(100/factor,Digits))
if(SMA7AM30 < SMA7A1H)if(SMA7A1H < SMA7A4H)if(Ask < SMA7A4H - NormalizeDouble(40/factor,Digits))
if(chighH1A > SMA7AM30)
if(Ask < SMA15A4H + NormalizeDouble(7/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
////xxxxxxx///xxxxxxx_01
if(clowH4A < SMA15A4H)if(clowH4A < EMA18A4H)
if(SMA15A4H > SMA30A4H) if(EMA4A4H > SMA30A4H)
if(Bid > EMA4A4H)if(Bid > SMA15A4H)if(Bid > EMA18A4H)
if(Bid < EMA4A4H + NormalizeDouble((15.5+spread)/factor,Digits))
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
////xxxxxxx_01
if(chighH4A > SMA15A4H)if(chighH4A > EMA18A4H)
if(SMA15A4H < SMA30A4H) if(EMA4A4H < SMA30A4H)
if(Ask < EMA4A4H)if(Ask < SMA15A4H)if(Ask < EMA18A4H)
if(Ask > EMA4A4H - NormalizeDouble((15.5+spread)/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
////xxxxxxx///xxxxxxx_02
if(clowH4A < EMA4A4H)
if(SMA15A4H < SMA30A4H) if(EMA4A4H > SMA30A4H)
if(Bid > EMA4A4H)if(Bid > SMA7A1H)
if(Bid < SMA7A1H + NormalizeDouble((15.5+spread)/factor,Digits))
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
////xxxxxxx_02
if(chighH4A > EMA4A4H)
if(SMA15A4H > SMA30A4H) if(EMA4A4H < SMA30A4H)
if(Ask < EMA4A4H)if(Ask < SMA7A1H)
if(Ask > SMA7A1H - NormalizeDouble((15.5+spread)/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
/////xxxxxxx
////xxxxxxx///xxxxxxx_03
if(copenW1A - clowW1A > NormalizeDouble((150.5+spread)/factor,Digits))
if(SMA15A4H < EMA18A4H)if(copenH4A < SMA15A4H)
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
////xxxxxxx_03
if(chighW1A - copenW1A > NormalizeDouble((150.5+spread)/factor,Digits))
if(SMA15A4H > EMA18A4H)if(copenH4A > SMA15A4H)
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)
////xxxxxxx///xxxxxxx_04
if(clowH4A < SMA15A4H)if(SMA15A4H > EMA18A4H)
if(SMA15A4H > SMA30A4H) if(EMA4A4H > SMA30A4H)
if(Bid > SMA15A4H)if(Bid > SMA15A4H)if(Bid > EMA18A4H)
if(Bid < SMA15A4H + NormalizeDouble((15.5+spread)/factor,Digits))
{
MaStatus[PairIndex] = longtrend;
}//if (bid > val)
////xxxxxxx_04
if(chighH4A > SMA15A4H)if(SMA15A4H < EMA18A4H)
if(SMA15A4H < SMA30A4H) if(EMA4A4H < SMA30A4H)
if(Ask < SMA15A4H)if(Ask < SMA15A4H)if(Ask < EMA18A4H)
if(Ask > SMA15A4H- NormalizeDouble((15.5+spread)/factor,Digits))
{
MaStatus[PairIndex] = shorttrend;
}//if (bid < val)

SMA =simple moving average
4H= 4HR
D1 = Day
clowD1 = candle low D1 todays lowest price

You close the trades, no matter if win or loss?

EA close the trades some win some loss

Thanks for details. It's clear now. I'm testing EA and 5 trades win now.
Looking at your code (quite hard to me since no programming background ) and trying to understand how EA move trailing stop.
So far EA looks interesting. I like it.

Sorry, that is clear (my fault). I don't understand what you mean with "to face news". F.e. what do you do this afternoon, when ISM Manufacturing PMI happens or especially tomorrow NFP? Do you nothing and let the EA work or do you stop the EA before the news and enter again after the news?