JagzFX Free Trading Tools

Quoting Nod32

Disliked

{quote} hi A4b4c4d {image}

Ignored

Quoting vasal

Disliked

Hello, May I ask why Trailing Stop at pin 8 dont close the order in EURNZD? What this symbol mean? In this EAX i am using reversed mode as u can see. May be the PIN 8 must have different value from close on "opposite"? {image} regards!

Ignored

Quoting tzkk22

Disliked

@jagzuk Hi Jagzuk, Please could you help me with this Supply and Demand indicator I have tried different settings in ONE Pin to get it working with no success? Would greatly appreciate it! {image} {file}

Ignored

Quoting jagzuk

Disliked

{quote} Hi, I think you need buffers 3 and 4. OnePIN buffers numbering now starts at 1, to be more consistent with what appears in the Data Window. {image}

Ignored

Quoting jagzuk

Disliked

{quote} Hi, I think you need buffers 3 and 4. OnePIN buffers numbering now starts at 1, to be more consistent with what appears in the Data Window. {image}

Ignored

Quoting tzkk22

Disliked

{quote} Thanks for replying I tried the Buffers you suggested but not working don't know why.... Ok for the tip will continue to play around and see about the results.

Ignored

Quoting jagzuk

Disliked

{quote} Hi, working for me with these settings: {image} Needed to swap the buffers 4,3 (or could have set Reverse Signal = true) and Candle Shift = 1.

Ignored

Quoting nagstn

Disliked

Hi Jagzuk, I am getting the following error while using this indicator in OnePin. could you please help me appreciate it in advance? Thank you. "2021.11.11 21:21:11.555 JagzFX_ONE_PIN_v1_11 NZDCAD,H1: invalid index buffer number in iCustom function" No signal shown on OnePin {image} {image}

Ignored

Quoting jagzuk

Disliked

{quote} Hi, Internally, the Metatrader iCustom function treats the first buffer as 0. But, usually, only programmers know that and it was confusing people. So, in recent versions, I changed the OnePin buffer inputs to begin at 1 rather than 0. I thought this would be simpler as you can then just count through the values in the Data Window (1st value, 2nd value, 3rd value, etc.) and put the corresponding number(s) in OnePIN. In short, add 1 to your buffer numbers and you should be good. Regards Jagz

Ignored

Quoting Leviticus83

Disliked

{quote} Wow, thank you for your explanations, Jagz! Just tried to do your proposed workaround with the second MUX and here's the desired result - actually didn't thought about such way to solve the puzzle! (to get a test signal I also had to set all the ATR Ratios threshold to at least 100% for signals to show up ) {image}And if you would think about any improvement in the code regarding more than one Allow signal that would be highly appreciated!

Ignored

Quoting nagstn

Disliked

{quote} HI Leviticus83, I couldn't find the Mode "A" in MUX. I only could see, Normal, Disabled, and Revers. Please help me if i missed anything here. Thank you

Ignored

Quoting nagstn

Disliked

Hi Jagzuk, could you please help me in getting the following? 2. I want to use the collective of 3-5 singles(or all signals) from one MUX to another MUX(to Pin#10 or so) as one signal, how can I achieve it? Please see the screenshot. {image}

Ignored

Quoting nagstn

Disliked

Hi Jagzuk, could you please help me in getting the following? 1. I want to use 2-3 OnePins on the same chart for using different timeframes/indicators. would it be possible? I tried it giving the x,y coordinates with different location values, but it's not working(it is jumbling from one to another ). Please suggest 2. I want to use the collective of 3-5 singles(or all signals) from one MUX to another MUX(to Pin#10 or so) as one signal, how can I achieve it? Please see the screenshot. {image}

Ignored

Quoting jagzuk

Disliked

{quote} #1 Yes, you just need to set each OnePIN to a different pin number (and of course put in the settings for each indicator). Here is an example using the ADX DI signals (buffers 2 & 3 from the ADX indicator) on both H1 and H4 timeframes. The ONEpins are on pins 10 & 11, and the MUX is set to combine them onto pin 1, which can then be the signal for the dashboard. {image}

Ignored