CCfp-Diff Strategy Entries, filtering, low DD, exits, etc | Page 2 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Geko/GiG CCfp-Diff Dashboard 114 replies

CCfp-Diff LIVE Account Trading Journal 50 replies

CCfp Strategy Consistent Profitability Settings 8 replies

scripts for entries and exits based on alerts 0 replies

Entries and Exits 5 replies

Attachments: CCfp-Diff Strategy Entries, filtering, low DD, exits, etc
Exit Attachments

CCfp-Diff Strategy Entries, filtering, low DD, exits, etc

  • #21
  • Jun 15, 2017 12:25pm Jun 15, 2017 12:25pm
Quoting firewight
{quote} So its not opening new signals if the CCFp prints a new pair, but it IS closing pairs that show an opposite signal? That sounds interesting!
yes, is working in that way, no adding more in same direction but closing with opposite one

note: in case another pair trigger that was not trading before in any of those ind, that signal will be added too
  • #22
  • Edited 1:15pm Jun 15, 2017 12:27pm | Edited 1:15pm
Day One testing Daily and Weekly with a trend direction filter from GIG Forum

So far today's results

1440 FT Trend Direction Filter On
SL: -200
TP: 500
Closes Basket at 19:05GMT

DD: 84 Pips
Profit: 311 Pips

Here's the link to his DB, maybe invite him to this thread.

https://www.greed-is-good.com/forum/...7&p=1080#p1080
Attached Image (click to enlarge)
Click to Enlarge Name: DB Screen Shot.png Size: 106 KB
Attached File(s)
File Type: ex4 ! - !-GiG-!--Dashboard-05.ex4   606 KB | 627 downloads
  • #23
  • Jun 15, 2017 1:19pm Jun 15, 2017 1:19pm
Quoting firewight
{quote} So its not opening new signals if the CCFp prints a new pair, but it IS closing pairs that show an opposite signal? That sounds interesting!
seen the interested discussion of you and Rumbaut .. however the little problems that Eax still has
is the close and the blinking problem... but also at the same time that should not happen to anyone
who is using the latest version of Eax 2.8, but i found that it still happens for some reasons...
It is true that we got the H "Hold Scope" where we can program something like

  1. < Hold Minutes Since last open or
  2. closed order or
  3. order per Bar ...

however as far as i can see, it is not exactly working nicely with Pins at times... not all times for some reasons ..
so we find that for example if we have lets say a Pin 4 Ccfp-df with D/H4/H1/M15 with exit on M15
when M15 pair disappear or no signal as absent then the trade should be closed, however
after a while the trade re-opens as there is the signal again ,, and you see trades opened and closed as in my pic
which shows the account history .... -10 / -25 / -14 .. that means it was opens (spread taken and closed again)
There are ways of course to make all this process a bit milder and safe, by using a next higher TF H1 ... but then again when it is gonna close the trade ? when is too late .. lagging etc ? and so personally i prefer to use external Ea's to manage those trades
or make it manually _
It does work pretty well with other signals which are internal to Eax as the BQr / Rs / Gap to mention a few

Attached Image(s) (click to enlarge)
Click to Enlarge Name: signal change close trade.jpg Size: 345 KB
Click to Enlarge Name: Eax close .jpg Size: 91 KB
The arriving better than the arrival, the journey has just started
  • #24
  • Jun 15, 2017 3:07pm Jun 15, 2017 3:07pm
Quoting jenbols
{quote} seen the interested discussion of you and Rumbaut .. however the little problems that Eax still has is the close and the blinking problem... but also at the same time that should not happen to anyone who is using the latest version of Eax 2.8, but i found that it still happens for some reasons... It is true that we got the H "Hold Scope" where we can program something like < Hold Minutes Since last open or closed order or order per Bar ... however as far as i can see, it is not exactly working nicely with Pins at times... not all times for...
Jenbol
Did you try exit in m15 but opposit signal of previous m15 direction?
  • #25
  • Jun 15, 2017 3:57pm Jun 15, 2017 3:57pm
Quoting rumbaut
{quote} Jenbol Did you try exit in m15 but opposit signal of previous m15 direction?
Yes that is one of the first thing to do when you learn Eax ///
but what i am saying is that Opp signal / absent signal / lost signal .. it's all about the signal that can come and go
and that makes me uncomfortable ... so i use basket SL and SL per Pair or..... external Ea to manage trades ...
i like to use something like MAs 34 for example more precise for my needs ....
have also used the [pips>0.0](5-10pips...) and that was a little better as the trade is not closed immediately unless certain pips ...
I am only saying that i don't use much the close on the Pins but i do use close on RS or GAP or BQR as it is better and works too ..
I luv EAX but the close function there mhmhm...
Does it work for you ? I mean on Pins ? do you get closed and re-opened trades ?
if so then it is fine.. there are a few methods that can be used as an alternative anyway
For example a PIN that did well for me as Exit/Close was Sinus Ma linear .. and so on ...
The arriving better than the arrival, the journey has just started
  • #26
  • Jun 15, 2017 3:59pm Jun 15, 2017 3:59pm
@Forexpinbar and everyone
Before we go too far here, again, just my thoughts, this should be treated like a Business, that is exactly what it is, and as such we should have a plan developed and then follow the plan. If not then the risk is that it will become a massive thread with a million tangents and little direction other than the goal of making a profit.
It is easy for me to see that there are a lot of people here far smarter than I, however I sincerely believe we need a plan.
These are my ideas for establishing a plan moving forward.
1. Get some coders on board that are prepared to do the coding and have it open. They must be able to code in MT4 and MT5 - MT4 is finishing - maybe we will need to be prepared to pay for this, maybe xmess7 will continue after his Trade Manager is finished (certainly hope so).
Reason: e.g. EAX is a great dashboard just like Casino was a great dashboard and there are many others, the problem is Aeseme has disappeared as has ET and as we are basically putting our financial future in the coding, the last thing I for one wants to happen is to get close to the "Holy Basket Grail" and the developer disappears for whatever reason. We need developers working together and as a backup for each other. The code should be as xmess7 has graciously decided with his Trade Manager to be open code. (If someone steals it and runs away with it, I don't care, if I am making money from it and others can benefit from it well ... for me it is Pay It Forward.)
2. Establish what we want from this?
a) Strategies to produce a 1%, 2%, 3% ... profit in a 4 hour period.
b) Strategies to produce a 1%, 2%, 3% ... profit in a session, e.g. London, etc
c) Strategies to produce a 1%, 2%, 3% ... profit in a 24 hour period.
d) Hope you get the idea.
3. How is the testing going to be done, fractured or planned with certain people doing certain things ... like a business?
Just a few of my thoughts ...
When you are successful perhaps give a thought to others ... Kiva dot org
  • #27
  • Jun 15, 2017 4:10pm Jun 15, 2017 4:10pm
Quoting PayItForward
@Forexpinbar and everyone Before we go too far here, again, just my thoughts, this should be treated like a Business, that is exactly what it is, and as such we should have a plan developed and then followghts ...
It is nice what you just said... and I am aware of some coders who are working
to make some updates and creating new Dashboards similar to Eax, not sure about Casino or others
...Unfortunately those dashboards have been "apparently" abandoned by their creators, but we never know if they suddenly will reappear
and surprise all of us. MT5 will take over eventually, but MT4 will still keep on working ,, okay with no updates
but it will still exists, until it will be so old fashioned that people will just drop it when there will be more
indicators and Dashboards for MT5...
Plan for strategies can be made, but we need a guide and someone who can point the Majority of us
in the right direction _
Now the thread has just started and it is good to hear a few opinions like yours
and i am sure later it will develop into something very interesting.. we just need to know where we are heading to_
The arriving better than the arrival, the journey has just started
  • #28
  • Jun 15, 2017 4:55pm Jun 15, 2017 4:55pm
Quoting jenbols
{quote} Yes that is one of the first thing to do when you learn Eax /// but what i am saying is that Opp signal / absent signal / lost signal .. it's all about the signal that can come and go and that makes me uncomfortable ... so i use basket SL and SL per Pair or..... external Ea to manage trades ... i like to use something like MAs 34 for example more precise for my needs .... have also used the [pips>0.0](5-10pips...) and that was a little better as the trade is not closed immediately unless certain pips ... I am only saying that i don't use...
I agree with you, only i would like to have a parameter for any MA that set trading zone above/below that MA, for example not trade buy if price above "X" pips from MA or don't sell if price is more that "X" pips below the MA, but for now we only have price respect to MA using mdash, another think can be have the option to compare how are different MA respect each other, like MA 5 > MA 8 > 13 ? Hope good coder can make something like this mtf version and PIN available.

So far I love the ccfp and i am coding ( not me ) one indicator that already has PIN and we can use different scenarios to get that PIN . I invite any coder here to work together and get something for all of us. Meantime a picture of it

The indicator will have the option to work as a basket or individual trader signal, meaning if I use basket, when all conditions are met in that currency the indicator will PIN OUT only pairs related to that currency
Attached Image (click to enlarge)
Click to Enlarge Name: CCFp ( LEVEL ) BS criteria.png Size: 154 KB
  • #29
  • Jun 15, 2017 5:06pm Jun 15, 2017 5:06pm
Quoting IrishTrader
Day One testing Daily and Weekly with a trend direction filter from GIG Forum So far today's results 1440 FT Trend Direction Filter On SL: -200 TP: 500 Closes Basket at 19:05GMT DD: 84 Pips Profit: 311 Pips Here's the link to his DB, maybe invite him to this thread. https://www.greed-is-good.com/forum/...7&p=1080#p1080 {image} {file}
irishtrader,

mine does not show correctly on screen, columms are cut off right side. i adjusted the x and y but still getting nowhere.

how did you get yours to show all info correctly ? even if i go full screen a lot of stuff is missing.
  • #30
  • Jun 15, 2017 5:08pm Jun 15, 2017 5:08pm
Quoting rumbaut
{quote} I agree with you, only i would like to have a parameter for any MA that set trading zone above/below that MA, for example not trade buy if price above "X" pips from MA or don't sell if price is more that "X" pips below the MA, but for now we only have price respect to MA using mdash, another think can be have the option to compare how are different MA respect each other, like MA 5 > MA 8 > 13 ? Hope good coder can make something like this mtf version and PIN available. So far I love the ccfp and i am coding ( not me ) one indicator...
Last Trend had that and more things ( you can use 4 MAs at same time). You wait I have it converted to MT5...
Try don't lose pants never...
  • #31
  • Jun 15, 2017 5:08pm Jun 15, 2017 5:08pm
Quoting rumbaut
{quote} I agree wi..--.--y {image}
Here Post 5,522 once i displayed to someone
what i generally use for exits in terms on MA's... something simple
you can choose to Exit if crosses the MA on the 30 min below/down or wait to retrace and see if it continues
or choose to see it on the H1 chart and have a different vision and perspective and so on ...

Edit: Now i see your photo .. Yes Ccfp with lines too ...
and i see one Indi i have never seen
The arriving better than the arrival, the journey has just started
  • #32
  • Jun 15, 2017 5:42pm Jun 15, 2017 5:42pm
Quoting IrishTrader
{quote} The dashboard chart will show a blank screen for about 5 minutes or so while it downloads the historical data for each pair, then it will load up the dashboard onto the chart.
it loads just fine no problemo, but right side and bottom are cut off.

its driving me insane, i cant make it show all. even if i go full screen makes not much difference.

https://www.mql5.com/en/charts/72137...sdi-m1-tw-corp
  • #33
  • Jun 15, 2017 6:33pm Jun 15, 2017 6:33pm
Quoting reinerh
{quote} it loads just fine no problemo, but right side and bottom are cut off. its driving me insane, i cant make it show all. even if i go full screen makes not much difference. https://www.mql5.com/en/charts/72137...sdi-m1-tw-corp
Now I see what you mean. I will ask the developer to see if there is a solution.
  • #34
  • Jun 15, 2017 7:51pm Jun 15, 2017 7:51pm
Quoting IrishTrader
{quote} Now I see what you mean. I will ask the developer to see if there is a solution.

thanks much irish,

i run this in a windows vps, maybe thats why. already tried everything i could think of and no luck.
  • #35
  • Jun 15, 2017 8:44pm Jun 15, 2017 8:44pm
Quoting IrishTrader
Day One testing Daily and Weekly with a trend direction filter from GIG Forum So far today's results 1440 FT Trend Direction Filter On SL: -200 TP: 500 Closes Basket at 19:05GMT DD: 84 Pips Profit: 311 Pips Here's the link to his DB, maybe invite him to this thread. https://www.greed-is-good.com/forum/...7&p=1080#p1080 {image} {file}

Is this with the AUTO-TRADING on?

Could you share your set file for the GIG EA?

Thanks

Bruce
  • #36
  • Jun 15, 2017 11:35pm Jun 15, 2017 11:35pm
Quoting PayItForward
@Forexpinbar and everyone Before we go too far here, again, just my thoughts, this should be treated like a Business, that is exactly what it is, and as such we should have a plan developed and then follow the plan. If not then the risk is that it will become a massive thread with a million tangents and little direction other than the goal of making a profit.
Quite frankly, I like many different tangents. It means everyone is thinking for themselves and trialing different methods, EA's DB's and strategies...

There is little point having 100 people doing the exact same thing looking for different results...

Just my opinion though.
Life is like a snickers, its full of nuts!
  • #37
  • Jun 16, 2017 1:32am Jun 16, 2017 1:32am
Quoting firewight
{quote} Quite frankly, I like many different tangents. It means everyone is thinking for themselves and trialing different methods, EA's DB's and strategies... There is little point having 100 people doing the exact same thing looking for different results... Just my opinion though.
Unfortunately I think you missed my point ... nothing wrong with a several different tangents but imo there i a lot wrong with a "million" as I said, making the most of the resources available.
Just my thoughts.
Cheers
When you are successful perhaps give a thought to others ... Kiva dot org
  • #38
  • Edited 2:07am Jun 16, 2017 1:51am | Edited 2:07am
Quoting PayItForward
{quote} Unfortunately I think you missed my point ... nothing wrong with a several different tangents but imo there i a lot wrong with a "million" as I said, making the most of the resources available. Just my thoughts. Cheers
Bring as many as possible, the good ones will shine though...

No one is going to organise the traders here to do different things, and the traders here don't want to be told what to do, it's just the way it is I'm afraid...
Life is like a snickers, its full of nuts!
  • #39
  • Jun 16, 2017 2:08am Jun 16, 2017 2:08am
PLEASE HELP ME TO INSTALL CCfp-Diff Strategy Entries?
  • #40
  • Jun 16, 2017 3:30am Jun 16, 2017 3:30am
Quoting reinerh
{quote} thanks much irish, i run this in a windows vps, maybe thats why. already tried everything i could think of and no luck.
It is a resolution problem. It is *fixed* to run with 1920*1080 for example and you see it at 1280*720. Change the way you connect to the vps so you can alter the resolution to a bigger one.
0 traders viewing now