Planetary Cycles Trading (EUR/USD)

piptakers,
ha you too !
----------------------
In attached pg only swe_calc() and swe_houses() are called.
----------------------------
swe_calc() and Zet locate planets in same way ...that proofs it is working perfectly.
---------------------------------
But for swe_houses() that's a different matter.
There are 42°44' error interval for Asc
----------------------
I'm asking if swe_houses() is the right one or if erorr comes from its input or output datas
I suppose ascmc[SE_ASC] is in decimal degree,dont I?

Paulselvan,

Yes. Swe_house () is used to get asc and mc.

End of week recap... EUR/USD 30 min data

Based on my first post, #8217, May 12 the prediction saw a net gain of 108 pips...
In spite of a rocky beginning, the end of the week took of like a bandit...
https://www.forexfactory.com/showthr...42#post9862042

@Paulselvan , little diff deg (moon , asc,mc,des,ic) perhaps we need another formula

EUR/USD 30min EDT

Next Week's Forecast:

Blue line is Sun-Sun 4th harmonic, 100% smooth orb and normal on the oscillator
Red line is a composite cycles line of 914,906, 1,067 and 1,345 bars as generated by the Q Spectrum module.
Thin Blue active line was chosen by the similarity module and found that the week of Nov 6th 2016 was most similar in the 10,000 bars in my history to the present.

@santos_am
-------------------------------
For the Moon I found also some little diference .
In your picture there are 35 mn arc differences ,that means 2 mn 20s of time delay.
I suppose we can tolerate this without loss of quality.
---------------------------

Can u share ur pg just to see how you get Asc and MC coord ?


--------------------------
Tnx for MC infos

http://radixpro.com/a4a-start/medium-coeli/
Accidentally search..
Using swe_house_armc

From other site

========================
First you need to get the Julian Day
M = month
D = day
Y = year
If M = 1 or 2, then Y = Y-1 and M = M+12
A = int (Y/100)
B = 2 - A + int (A/4)
if Julian calendar B=0
JD = int (365.25(Y+4716)) + int(30.6001(M+1)) + D + B - 1524.5 + UT/24
==================
Next the mean obliquity
T = (JD-2451545)/36525
OB = 23.43929111 - .013004167 *T - .000000164 T*T + .000000504 * T*T*T
============================
Now you need the sidereal time expressed as RAMC
T = (JD-2451545)/36525
CD = JD - 2451545
Greenwich RAMC
GRAMC = 280.46061837 + 360.98564736629 *CD + .000387933 *T*T -
(T*T*T*)/38710000
RAMC = GRAMC - WestLongitude or
RAMC = GRAMC + EastLongitude
(Sidereal Time = RAMC/15)
===============================
Now you have all the elements
Latitude, RAMC, Obliquity
This is Rising Function formula according to Axel Harvey (thanx, Axel)
R = ATN (COS x / -g) + h
where
g = TAN y SIN z + SIN x COS z
h = 180 if -g <0 else h = 0
For the angles, substitute values from below
=============================
Midheaven
x = RAMC - 90
y = 0
z = OB
=======================
Ascendant
x = RAMC
y = Latitude
z = OB
================
Vertex
x = RAMC + 180
y = 90 - Latitude
z = OB
==================
East Point or Equatorial Ascendant
x = RAMC
y = 0
z = OB
================
For some houses
================
Regiomontanus
z = OB
A = ATN ( ˝ TAN Lat)
B = ATN ((SQRT 3/2) TAN Lat)
For Regiomontanus Cusp...
XI.... use x = RAMC - 60 | y = A
XII... use x = RAMC - 30 | y = B
II.... use x = RAMC + 30 | y = B
III... use x = RAMC + 60 | y = A
================================
Topocentric
z = OB
A = ATN ( 1/3 TAN Lat)
B = ATN ( 2/3 TAN Lat)
For Topocentric Cusp...
XI.... use x = RAMC - 60 | y = A
XII... use x = RAMC - 30 | y = B
II.... use x = RAMC + 30 | y = B
III... use x = RAMC + 60 | y = A
================================
KOCH
z = OB
y = Latitude
A = ArcSine (Sine RAMC * TAN Lat * TAN OB)
For KOCH Cusp...
XI.... use x = RAMC - 2A/3 - 60
XII... use x = RAMC - A/3 - 30
II.... use x = RAMC + A/3 + 30
III... use x = RAMC + 2A/3 + 60
================================
Meridian
z = OB
y = 0
For Meridian Cusp...
XI.... use x = RAMC - 60
XII... use x = RAMC - 30
EA.... use x = RAMC
II.... use x = RAMC + 30
III... use x = RAMC + 60
================================
Do your results agree to a calculated chart?
If so, then good.
This is much harder.
Placidus cusps are a recursive method; not a direct calculation like the
others.
B = 2/3 ArcSine (TAN d * TAN Lat)
where d is found by the following...
XI.... p = 30 | q = 1/3
XII... p = 60 | q = 2/3
II.... p = 120 | q = 2/3
III... p = 150 | q = 1/3
Solve recusively for X(1)...
X(1) = p + q ArcSine (TAN X(0) * TAN Lat * TAN Obl)
with each result being substituted for X(0)
It will save a step to begin with X(0) = RAMC + p
++++++++++++++++++++++++++++++
Example:
X(1) = p + q ArcSine (TAN X(0) * TAN Lat * TAN Obl)
X(2) = p + q ArcSine (TAN X(1) * TAN Lat * TAN Obl)
X(3) = p + q ArcSine (TAN X(2) * TAN Lat * TAN Obl)
X(4) = p + q ArcSine (TAN X(3) * TAN Lat * TAN Obl)
X(5) = p + q ArcSine (TAN X(4) * TAN Lat * TAN Obl)
X(6) = p + q ArcSine (TAN X(5) * TAN Lat * TAN Obl)
X(7) = p + q ArcSine (TAN X(6) * TAN Lat * TAN Obl)
X(8) = p + q ArcSine (TAN X(7) * TAN Lat * TAN Obl)
X(9) = p + q ArcSine (TAN X(8) * TAN Lat * TAN Obl)
etc., etc. until both sides of the equation are equal.
++++++++++++++++++++++++++
In other words,
X(0) = RAMC + p
DO
X(0) = INT (X(0) * 100000) 'round it off to any value you wish
X(0) = X(0)/100000
X(1) = X(0)
X(0) = p + q ArcSine (TAN X(1) * TAN Lat * TAN Obl)
UNTIL X(1) = X(0)
====================
Once you get A = B, which is the right ascension of the cusp,
Solve for the declination of the cusp:
Dec = ATAN (SIN A * TAN Obl)
Then use the Rising Function Formula with
X = A
Y = Dec
Z = Obl
Subtract 90 from the result for each house cusp.

23/5 17 Tue. 3:00 Moon conj. Ouranus

Your Ganzilla looks pretty similar to the v8.9 current version I have. It seems that the 8.1 pro version floating about is the one that Norton is determined to kill. The main think lacking with Gannzilla I suppose is that you can't have a Natal and Progressed ephemeris on the same wheel.

BTW what astro software do you use nowadays?

This sort of astro work is a great approach. The problem seems to be getting consistent, efffective indicator groups to apply it quickly for short term intraday trade. Asc, Desc, Midheaven aspects are a potentially exciting addition to a trading strategy.

I can't get it to appear on my MT4. Nor can I get to the settings part before that.

Sadly MT4 seems to be getting ever more problematic. Once way ahead of its time, MT4 can be a complete pain in the neck these days. My PlanetLines indicator died a while back (which ok, was a bit clunky and not used for actual trading). Yesterday the same happened with AstroIndicator4. I replaced that with Astro Indic Chi and the new ones posted here. Numerous other astro indicators just don't appear full stop.

I've gone through the include and libraries checks numerous times. Anyone have any ideas?

Pb quoted at post #8281 is resolved :

Now eqt_2_od_v3.mq4 Asc, & Mc outputs also fit with ZET ones.

Another grand trine in effect today...
Moon tr. Sat. 2:16
Moon trine M. Node 6:25

combined wit the Moon conj. Ouranus 3:00 and Vertex in 2:50 we got a formidable low in E. and BP

Let s see how long it will last. . .

You need 3 files in 3 different directories :
...\MQL4\Include\astro_swiss.mq4
...\MQL4\Libraries\swedll32.dll
...\MQL4\indicators\eqt_2_zod_v3.mq4

Note: Dont choose files instalation via Windows Explorer :
Here are right procedures :
1>Copy file you want to install in MT4
2> Open Mt4 plateform
3> Go to File>Open Data folder
3> Paste file in wanted directory.
4> Close and restart MT4
5> The file is ready to use

Many thanks. I tried those steps, swapping files over. The Swedll was larger than the one I had.
It did let me put AstroIndic4 on my chart(which I couldn't before), but I couldn't get it to plot anything.

However, I couldn't get your eqt_2_zod_v3.mq4 indicator to attach to a chart. And it shows 5 errors on compiling.

I'm on FXCM build 1090. I think for some things Swedll32 and Swedll64 are an issue.
But I wonder what it could be here?

Swedll64.dll works only for mt5 ( not mql5 )
Swedll32.dll works both mt4&mt5 ( read from mql forum)
Next depend on the OS u use ( I still using xp 32bit )
https://support.microsoft.com/en-us/...error-messages

I post swedll64.dll , hope mt5 user/coder can develop indi. For preparation, if we have to migrate from mt4 to mt5..

Can u post screenshot of compiling errors

Hi. Thanks for your info. I read up on this... and was a bit lost haha! So I think I might try the other methods first. For instance, running it in 32bit format, as I understand is possible.


Whats also puzzling is that other astro indicators work.

Hi, here's what I got after I followed the steps. Strange eh...? :-/

@PipSharer
ypur version of astro_swiss should be modified
replace it by this

OK many thanks paul. Will try that.
I did swap those over I thought tho'..