RENKO Boxes Trade easy | Page 61 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

RENKO Trading SYSTEM - RENKO Indicators 7 replies

Easy Renko Strategy (ERS) 18 replies

New Renko Bar and Reversal Renko Bar Indicator Alert Help Please 5 replies

Easy Renko EA wanted 13 replies

Russian Doll - Boxes within boxes price action 6 replies

Attachments: RENKO Boxes Trade easy
Exit Attachments

RENKO Boxes Trade easy

  • #1,201
  • Dec 20, 2016 11:53pm Dec 20, 2016 11:53pm
Quoting arello
{quote} Mapseam, thank you, but how did you get such results? Did you test it in tester? I have an error OrderSend =130, which is due to incorrect stoploss. How to correct it?
Do not thank me, respected arello. EAa isn't grail, because there spreads and slippage.

How to correct an error OrderSend =130?
You can set the OPPerсent parameter positive value equal to or greater than the value of the spread.
In other words, you can use the indentation from the closing price of the last bar.
  • #1,202
  • Dec 20, 2016 11:57pm Dec 20, 2016 11:57pm
Quoting le celte
{quote} Bonjour, Wouah !! Thanks a lot Cheers jf PS : On EU only ? Because on the 6 paires = -310 pips since this morning ....
Sorry, le celte, but did You immediately began to use the EA on a live account? If so, then this step is very short-sighted.
I really hope that was wrong, and You are testing expert advisor on a demo account.
  • #1,203
  • Dec 21, 2016 12:02am Dec 21, 2016 12:02am
Dear mapseam
What settings do you use? I only get negative performance on demo tests. Thanks!
  • #1,204
  • Dec 21, 2016 2:22am Dec 21, 2016 2:22am
Quoting kofix11
Dear mapseam What settings do you use? I only get negative performance on demo tests. Thanks!
Default params, respected kofix11.
I used the strategy tester on Renko bars for EU.

As I said earlier, EAa isn't grail, because there spreads and slippage.
  • #1,205
  • Dec 21, 2016 5:52am Dec 21, 2016 5:52am
Quoting Mapseam
Update. Version 1.06 Add the parameter ADXPeriod. If ADXPeriod=0, then rise of ADX - not checked. Tester result for default parameters on 6 month period (EU): {image} {file}
Hello,

I'm testing your EA on DAX with brick size 10, and I got problem that EA is opening new positions on same price when price level is oscilating in some band. For example, currently I got 2 sell positions on 11450, 2 buy positions 11470, 2 buy positions on 11480.
It would be better open new position only when prices is some distance from already opened trades.
  • #1,206
  • Dec 21, 2016 6:02am Dec 21, 2016 6:02am
Quoting matyke
{quote} Hello, I'm testing your EA on DAX with brick size 10, and I got problem that EA is opening new positions on same price when price level is oscilating in some band. For example, currently I got 2 sell positions on 11450, 2 buy positions 11470, 2 buy positions on 11480. It would be better open new position only when prices is some distance from already opened trades.
Respected matyke, try, please, OPPerсent parameter equal, for example, 10 or 20 or 30 (and etc.).
Sorry, but I havn't tested the EA for DAX.
  • #1,207
  • Dec 21, 2016 9:38am Dec 21, 2016 9:38am
Quoting Mapseam
Update. Version 1.06 Add the parameter ADXPeriod. If ADXPeriod=0, then rise of ADX - not checked. Tester result for default parameters on 6 month period (EU): {image} {file}
hi Mapseam, can you elaborate a bit more how you backtest on offline renko chart?
are you using something like this - http://renkotraders.com/renko-tradin...-renko-charts/

Thanks.
  • #1,208
  • Dec 21, 2016 1:58pm Dec 21, 2016 1:58pm
Quoting Mapseam
{quote} Respected matyke, try, please, OPPerсent parameter equal, for example, 10 or 20 or 30 (and etc.). Sorry, but I havn't tested the EA for DAX.
Hi,

I tried put 55 in OPPercent, but result is same, again opened 2 trades on same price. For example it could check all open trades for max/min price for buy/sell trades and then open new trade only when it will distance from max/min to avoid opening multiple trades on same buy/sell prices.
  • #1,209
  • Edited 5:43pm Dec 21, 2016 3:45pm | Edited 5:43pm
Users want that I make trade copier from mid of January 2016

is any intereted please contact me by E-Mail with your user name:

[email protected]
  • #1,210
  • Dec 22, 2016 3:00am Dec 22, 2016 3:00am
Quoting cjtylor
{quote} hi Mapseam, can you elaborate a bit more how you backtest on offline renko chart? are you using something like this - http://renkotraders.com/renko-tradin...-renko-charts/ Thanks.
Hi, cjtylor.
I used the instructions on this page _http://www.argolab.net/po-renko-baram.html
  • #1,211
  • Dec 22, 2016 3:26am Dec 22, 2016 3:26am
Quoting matyke
{quote} Hi, I tried put 55 in OPPercent, but result is same, again opened 2 trades on same price. For example it could check all open trades for max/min price for buy/sell trades and then open new trade only when it will distance from max/min to avoid opening multiple trades on same buy/sell prices.
Let me ask You, what is this "on same price"?
If OPPercent = 0, then bot will attempt to open an limit order at a last closing price (henceforth LCP).
If OPPercent > 0, then open level located below LCP on (barSize * OPPercent / 100.0) value - for buy limit order, and above on the same value - for sell limit order.
I heard that DAX - very vola security. Therefore, I suppose that You need to increase the value of the OPPercent to 60 or 70 (and etc.).
  • #1,212
  • Dec 23, 2016 12:59am Dec 23, 2016 12:59am
Quoting Mapseam
{quote} Let me ask You, what is this "on same price"? If OPPercent = 0, then bot will attempt to open an limit order at a last closing price (henceforth LCP). If OPPercent > 0, then open level located below LCP on (barSize * OPPercent / 100.0) value - for buy limit order, and above on the same value - for sell limit order. I heard that DAX - very vola security. Therefore, I suppose that You need to increase the value of the OPPercent to 60 or 70 (and etc.).
Hello,

I mean when I have for example opened buy trades on 11460, 11470, 11480, then price goes gown and then again up, so not to open new trade on 11460, 114470, but only when price reach higher then 11480, so one only new trade when it will be on 11490.
  • #1,213
  • Jan 1, 2017 7:27am Jan 1, 2017 7:27am
Quoting Mapseam
Update. Version 1.06 Add the parameter ADXPeriod. If ADXPeriod=0, then rise of ADX - not checked. Tester result for default parameters on 6 month period (EU): {image} {file}
Hello,

Just for me understand better...

Your EA open orders Automatically?

I say this because in my chart this is not happened......
  • #1,214
  • Jan 1, 2017 11:56pm Jan 1, 2017 11:56pm
Quoting LuizSchiavi
{quote} Hello, Just for me understand better... Your EA open orders Automatically? I say this because in my chart this is not happened......
Hi, respected LuizSchiavi!

Yes, my EA open orders automatically, if global variable MedianRenko_GhB_IsTrade=1.0
Possible, You may have incorrectly plotted Renko bars.
For example, read this article: _http://renkotraders.com/renko-trading-basics/what-are-renko-bars/

Update. Version 1.08
Improve the entry point for pending orders.
BE => BreakEven
Attached File(s)
File Type: ex4 e-msMedianRenko_GhB v108.ex4   82 KB | 438 downloads
  • #1,215
  • Jan 2, 2017 2:44am Jan 2, 2017 2:44am
Quoting Mapseam
{quote} Hi, respected LuizSchiavi! Yes, my EA open orders automatically, if global variable MedianRenko_GhB_IsTrade=1.0 Possible, You may have incorrectly plotted Renko bars. For example, read this article: _http://renkotraders.com/renko-trading-basics/what-are-renko-bars/ Update. Version 1.08 Improve the entry point for pending orders. BE => BreakEven {file}
Hello,

Thanks for annwer !
  • #1,216
  • Jan 4, 2017 7:33am Jan 4, 2017 7:33am
Quoting Mapseam
{quote} Hi, respected LuizSchiavi! Yes, my EA open orders automatically, if global variable MedianRenko_GhB_IsTrade=1.0 Possible, You may have incorrectly plotted Renko bars. For example, read this article: _http://renkotraders.com/renko-trading-basics/what-are-renko-bars/ Update. Version 1.08 Improve the entry point for pending orders. BE => BreakEven {file}
Hello,

I got this error messages instead of opening new positions:
2017.01.04 14:14:36.555 e-msMedianRenko_GhB v108 DE.30.,M2: Alert: DE.30.,2: Unsufficient equity for BUY-order!

But there is enough money/equity on demo account (20.000 EUR) and I wan to open 0.1 lots of DAX/DE30.
When manually open 0.1 lots, it's no problem.
  • #1,217
  • Jan 4, 2017 1:46pm Jan 4, 2017 1:46pm
Quoting matyke
{quote} Hello, I got this error messages instead of opening new positions: 2017.01.04 14:14:36.555 e-msMedianRenko_GhB v108 DE.30.,M2: Alert: DE.30.,2: Unsufficient equity for BUY-order! But there is enough money/equity on demo account (20.000 EUR) and I wan to open 0.1 lots of DAX/DE30. When manually open 0.1 lots, it's no problem.
Hi, matyke!
So far, the cause of the error is not known to me.

Changed ver 1.08
Now the error message for open order contains lots and minLot values.
lots must be >= minLot
Attached File(s)
File Type: ex4 e-msMedianRenko_GhB v108.ex4   82 KB | 438 downloads
  • #1,218
  • Jan 5, 2017 3:39am Jan 5, 2017 3:39am
Quoting Mapseam
{quote} Hi, matyke! So far, the cause of the error is not known to me. Changed ver 1.08 Now the error message for open order contains lots and minLot values. lots must be >= minLot {file}
Hello,

with updated version it shows different errors:
2017.01.05 10:33:58.792 e-msMedianRenko_GhB v108 DE.30.,M2: Ask=11576.6 Bid=11575.5 sy=DE.30. ll=0.1 op=Buy pp=11576.6 sl=11476.6 tp=11591.6 mn=5523
2017.01.05 10:33:58.792 e-msMedianRenko_GhB v108 DE.30.,M2: Error(4112) opening position: unknown error, try 5
2017.01.05 10:33:50.071 e-msMedianRenko_GhB v108 DE.30.,M2: Ask=11576.3 Bid=11575.3 sy=DE.30. ll=0.1 op=Buy pp=11576.3 sl=11476.6 tp=11591.6 mn=5523
2017.01.05 10:33:50.071 e-msMedianRenko_GhB v108 DE.30.,M2: Error(4112) opening position: unknown error, try 4

in configuration I have boths Lots and MinLotR value 0.1
  • #1,219
  • Jan 5, 2017 4:35am Jan 5, 2017 4:35am
Quoting matyke
{quote} Hello, with updated version it shows different errors: 2017.01.05 10:33:58.792 e-msMedianRenko_GhB v108 DE.30.,M2: Ask=11576.6 Bid=11575.5 sy=DE.30. ll=0.1 op=Buy pp=11576.6 sl=11476.6 tp=11591.6 mn=5523 2017.01.05 10:33:58.792 e-msMedianRenko_GhB v108 DE.30.,M2: Error(4112) opening position: unknown error, try 5 2017.01.05 10:33:50.071 e-msMedianRenko_GhB v108 DE.30.,M2: Ask=11576.3 Bid=11575.3 sy=DE.30. ll=0.1 op=Buy pp=11576.3 sl=11476.6 tp=11591.6 mn=5523 2017.01.05 10:33:50.071 e-msMedianRenko_GhB v108 DE.30.,M2: Error(4112) opening...

Hi,

new problem resolved - error 4112 is blocked EA by my broker - I got old type of account and from new year they blocked EA trading.

With new account it open trades again.

sorry for problems.
  • #1,220
  • Jan 5, 2017 9:00am Jan 5, 2017 9:00am
Quoting matyke
{quote} Hi, new problem resolved - error 4112 is blocked EA by my broker - I got old type of account and from new year they blocked EA trading. With new account it open trades again. sorry for problems.
Hello,

with modified version I experience new thing:
I configred SL, when trade is opened SL is setup based on config, but after some time EA configure SL to opening price and when price oscilate it's closed on 0 profit.
If it because of BEratio? How this parameter work?
1 trader viewing now