BDM+BSM and TTM

Tobib if this is about performance problems, if i am running a pretty complicated (couple of indicators) dashboard it takes my PC (which is almost the slowest in the chain) just a couple of seconds between pairs.
Also the renko driver is already without gaps.

A test for your pc would be change the config file to load the initial 28 pairs and use as a template the BDMDRIVERS\\BDMRENKODRIVERv1.
It takes about 30 seconds to a minute but than i have 28 renko charts.

Next BDMv1.35 release.

The fast dashboard selection did override the fast pair selection bar.
It will now be possible to have both and as long as you set the "Chart x switch pair" for each of the dashboard chart correctly it is even more fun.
It will take another 30 px from your charts but on 1920x1080 it still looks fine.

Next TTM release (i still have to test it on Monday) will have 2 lock-in types, pips and money.

The money lock is based on the number of pairs in the basket x the size of the lots you are trading the pips based is well, just pips per pair.
There are 9 locks you can set and after that normal pips trailing will kick in.

The multiplication factors when set correctly, are there to widen or narrow the distance for each lock step and the corresponding exit.
So for each lock step your exit can creep up closer to the current price or opposite start relaxing.

A lock will be made visible on the screen by a small horizontal lock bar.

Hi Hotpotato
please Update BDM . Thanks

Hi Hotpotato
it is possible update BDM .Thanks

Updated

Hello

First of all , I take my hat off to give thanks for having an excellent programmer as HotPotato . Also extend the same for different traders like Robert and ahhamidz with their results. Previous I read the thread of GVC and other dashboards as DingDong seeing them here in the BDM . Incredible offline charts and times have become different from standard mt4 as h2 , d2 etc. To date I have made manual trades daily as basket, attached report , this idea I would like to be programmed into the dashboard if possible

First idea I would like to add in any dashboard to be used is trail equity % like this:

EquityPercentTrigger=11 ( can be any number )
LockInPercent=10, ( after we our trigger 11% the EA will lock 10% for us )
HighEquiDropPercent=1 ( as soon as higher equity go down 1% from it , the EA close all orders and set EA in break mode until next day )

My daily goal is at least 5% daily

for example : If we set above numbers min win% ( in case we win the trade ) will be 10% but if spike up the equity% to 14% and go down after we can finish with 13%. attached is one picture today in Asia trading gbpjpy, only I forgot that I set same magic number in DD dash as my EA and in the DD was B TP % = 15, so DD closed that trade, look how my EA was set in BREAK MODE until next day at GMT 23 ( time that can be setup too )

Note: The idea is to implement in the future those ideas


Greetings to all and hope soon to get licensed version and provide new ideas to this amazing thread

Note: sorry for any misspelling , my native language is Spanish. Cuban living in USA but in Miami where every one speaks Spanish

"Greetings to all and hope soon to get licensed version and provide new ideas to this amazing thread."

You have to go to Skype and accept the invite you asked for.

TTMv1.03 will have some new locking and trailing functions.
Getting equity locking and in there will be considered.

Also considering some other trailing functions but only those that make sense when used in single pair and multi pair (basket) mode.

Hello HP

I don't have any invitation yet in my skype, maybe was found somebody else.

Awesome the trailing idea, is possible to get same idea but trailing with equity % as I requested before ?

Regards

Jose

Hello HP

I have tried to pay license but unfortunately George does not respond. I need to schedule one day to help me setup this in my pc when possible. If you are available let me know.

Thanks

Jose

@Tobib80

Try this.

barclose = true only updates and signals on bar close
checkdirection = true only gives and EAX pin signal if the signal bar is higher/lower than the previous bar.

Thanks great work as always

The full BDMv1.35 will be released later today.

Lots of improvements but the main are that everything now works on prefix/suffix brokers and selectable dashboards.

You can create any 1-5 chart dashboard and save it.
If you have a BDM preset with an EA (or two) and a dashboard running you select which dashboard you want to view using the [DASH] button.
The EA(s) loaded on the EA charts will keep on running.

Also automatic Renko, tick and period converters are added, i will explain that later on using the demo presets.

I would download the release later on and install it first on a fresh MT4 (run forceloadhistoricaldata !!) and give the added BDM preset files (presets/BDM) a test run to see all the possibilities.

BDMv1.35 is in post #1

http://www.forexfactory.com/showthread.php?t=574744

The BDM~WITH~SPECIALS preset file.

This preset file will open 28 initial (hidden) charts with a tick and a renkodriver on it acording to the template BDMDRIVERS\\BDMTICKRENKOv1.

On the dashboard chart 1 and chart 2 we use a Tick and a renko template to display chart and by setting the "Chart x offline timefame" to another value than 0 the dashboard will open the offline (19 is always tick and 6 is set in the renko driver on the template) charts and not the normal charts.

By opening and loading the tick and the renko drivers up-front loading BDM will take a bit longer but switching the dashboard between pairs is much faster.

The BDM~MULTI~SDS~SPECIAL preset file.

Another way to open renko, tick or period converter charts on a dashboard is to load the drivers on-the-fly.

This way you do not open the initial 28 charts with all the drivers on them to prevent any performance problems.

The specified driver template (with driver) will be loaded on a (hidden) chart and insted of opening that chart BDM will open the by the driver generated offline chart with the specified alternative timeframe.

If you switch the pair of the dashboard the driver and offline charts are closed and new ones are opened so this can take a bit longer.
"Normal" dashboard charts like M15 H1 etc. are not closed and reopened.

When using the input "Chart x driver tempate" you do not need to put BDMDRIVERS\\ in front. BDM does that.

Thankyou HP