BDM+BSM and TTM | Page 17 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

TTM Squeeze 8 replies

FXM and TTM 1,013 replies

Ttm Squeeze 0 replies

Attachments: BDM+BSM and TTM
Exit Attachments

BDM+BSM and TTM

  • #321
  • May 6, 2016 3:12am May 6, 2016 3:12am
Quoting LFN
{quote} Hi HP. Just managed to get the eax gap pins working after trial and error. I guess your test was not so good since we didn't get any myfxbook link?
I even didn't get to that, if there is one thing i hate it is not being able to develop and test due to hardware problems.
That's why i ordered two new systems.

I am still thinking on the use of DashTZ and EAX.
First of all the development of both seems to have stopped for now and who knows for how long.
Second the EAX pins do not support "exit on loss of signal" but only on "opposite signal" which just is not good enough.

So if the hardware cooperates i think that in the next release there will be a BDMpintrader (probably ugly but working) which does support the features needed.

Ps.

I also noticed that the system that found it funny to hang itself many multiple times a day now runs fine for the passed day after i remove DashTZ.
Could be coincidence.......
info@metacharttools,com
  • #322
  • May 8, 2016 2:11am May 8, 2016 2:11am
More noob questions here:

- I did my setups last week for GAP pins on several charts. Just started up the terminal now and the charts is there but the BDMtcsgap 1.03 indicator is gone from the charts. I am used to normal charts, with latest settings saved automatically. What can I do to to get the settings saved?

- What is the difference between single and double gap here?
Attached Image (click to enlarge)
Click to Enlarge Name: Namnlös.png Size: 15 KB
  • #323
  • May 8, 2016 2:59am May 8, 2016 2:59am
Quoting LFN
More noob questions here: - I did my setups last week for GAP pins on several charts. Just started up the terminal now and the charts is there but the BDMtcsgap 1.03 indicator is gone from the charts. I am used to normal charts, with latest settings saved automatically. What can I do to to get the settings saved? - What is the difference between single and double gap here? {image}
First the easy one.

A gap is the slope between two bars.
Single gap is between the lastbar and the gapbar, double gap is between the lastbar and gapbar and twogapbar.
Early (risky) entry can be done on a single gap but it is better to wait for the more secure two period gap.

On (re)entry BDM destroys old charts, creates new ones and applies the templates defined in the preset file.
So if you change parameters/settings of any of the indicators on the chart(s) and you are happy with the settings you have to save the template(s).
The only charts not destroyed are detached, kept or EA charts.

Fi. templates names here are BDMGAPv1, BDMGAPv2 etc.
Attached Image
info@metacharttools,com
  • #324
  • Edited 6:44am May 8, 2016 6:22am | Edited 6:44am
For the next release i added the INITIAL template name to the details.
This way if you want to save a changed template and you do not know exactly how it is named and where it (folder) should go you do not have to open the EA config which of course could screw things up again.


This is the INITIAL template name as specified in the BDM preset file.
If you change the template on a chart afterwards there is no way for BDM to notice that.

The BDM x.xx chart will display the preset file used (if you have given it a name).

Attached Image (click to enlarge)
Click to Enlarge Name: chartdetails.PNG Size: 58 KB
info@metacharttools,com
  • #325
  • May 8, 2016 6:43am May 8, 2016 6:43am
Also in the next release using the BDMhelper [K]/[KEEP] button on a chart you can add lines,shapes and other things on a chart, use that button and depending on your BDM setting this chart will be searched for first if you open any other set of charts.

Rectangle drawn on the EURUSD chart in the Core7 view (and kept) will also show in the EUR view on the EURUSD chart.
Attached Image (click to enlarge)
Click to Enlarge Name: keepall1.PNG Size: 55 KB
Attached Image (click to enlarge)
Click to Enlarge Name: keepall2.PNG Size: 107 KB
Attached Image
info@metacharttools,com
  • #326
  • May 8, 2016 12:51pm May 8, 2016 12:51pm
BDM1.34 and for free.
Attached File(s)
File Type: ex4 BDMv1.34.ex4   510 KB | 238 downloads
info@metacharttools,com
  • #327
  • May 10, 2016 4:28am May 10, 2016 4:28am
Hi Hotpotato

Which parts can be added a chart with different time frame ?
is possible in Free ?
Attached Image (click to enlarge)
Click to Enlarge Name: xauusd.png Size: 17 KB
  • #328
  • May 10, 2016 5:27am May 10, 2016 5:27am
Quoting ahhamidz
Hi Hotpotato Which parts can be added a chart with different time frame ? is possible in Free ? {image}
?????

Purpose of multi.
- Select [C] (and remember up to 8) other (stock, crude, gold) indices and store under [MULTI] button.
- Use [MULTI] button to view them.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: multinew1.PNG Size: 23 KB
Click to Enlarge Name: multinew2.PNG Size: 67 KB
info@metacharttools,com
  • #329
  • May 10, 2016 5:33am May 10, 2016 5:33am
Quoting Hotpotato
{quote} ????? Purpose of multi. - Select [C] (and remember up to 8) other (stock, crude, gold) indices and store under [MULTI] button. - Use [MULTI] button to view them. {image} {image}
Hi My Master
For example, I want to see AUDCAD in 2 a 3 different time frame . 5 , 15 . 60
Thanks
  • #330
  • May 10, 2016 5:39am May 10, 2016 5:39am
Use [PAIR] button to get single pair multiple periods.
Use [USER] button to recall last selected pair again.

Attached Image (click to enlarge)
Click to Enlarge Name: pairsnew1.PNG Size: 19 KB
Attached Image (click to enlarge)
Click to Enlarge Name: pairsnew2.PNG Size: 132 KB
Attached Image (click to enlarge)
Click to Enlarge Name: pairsnew3.PNG Size: 25 KB
info@metacharttools,com
  • #331
  • May 10, 2016 6:08am May 10, 2016 6:08am
Use [C] next to [SINGLE] button to select other symbols (crude, stocks) (must be in market watch !)
Use [SINGLE] button to recall any time..

Attached Image (click to enlarge)
Click to Enlarge Name: singlenew1.PNG Size: 20 KB
Attached Image (click to enlarge)
Click to Enlarge Name: singlenew2.PNG Size: 58 KB
info@metacharttools,com
  • #332
  • May 11, 2016 5:19am May 11, 2016 5:19am
Hi HP,

I would like to know why the cross of AUDJPY was not included in the crossed list?

Best regards
Attached Image (click to enlarge)
Click to Enlarge Name: HP.png Size: 30 KB
  • #333
  • Edited 11:00am May 11, 2016 8:57am | Edited 11:00am
Quoting htawfik
Hi HP, I would like to know why the cross of AUDJPY was not included in the crossed list? Best regards {image}
That cross just was outside the reach (could have happened just after bar close).

The right side of the "lastbar" is tick data so optical it could look if if has crossed inside (but it didn't).

If it doesn't turn around, wait for the next H1 and see if it is reported.
info@metacharttools,com
  • #334
  • May 12, 2016 7:25am May 12, 2016 7:25am
For those who think it is quite with BDM, it isn't behind the screen.

Busy getting the BDM gap (pin) trader up.
Just some issues with SL/TP and trailing and some settings EAX can not provide, loss of signal.
Attached Image (click to enlarge)
Click to Enlarge Name: gaptrader1.JPG Size: 184 KB
Attached Image (click to enlarge)
Click to Enlarge Name: gaptrader2.JPG Size: 178 KB
Attached Image


Under EXT you see the signals (for now) relating to the 3 chart dashboard.
info@metacharttools,com
  • #335
  • May 13, 2016 5:30am May 13, 2016 5:30am
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot (78).png Size: 234 KB


please can you help me
  • #336
  • May 13, 2016 9:53am May 13, 2016 9:53am
Hi HP,

I would like to know if you are still using the BSM and the Lock like before, do you have good results or you stopped using it

Also would you please let me know if the time for the lock is PC time or MT4 server time?

what is the best time for this lock based on the what you tried before?

Best regards
  • #337
  • May 13, 2016 11:34pm May 13, 2016 11:34pm
Quoting htawfik
Hi HP, I would like to know if you are still using the BSM and the Lock like before, do you have good results or you stopped using it Also would you please let me know if the time for the lock is PC time or MT4 server time? what is the best time for this lock based on the what you tried before? Best regards
Yes, i am still using BSM on a live account.
Even better, we trade BDM and BSM as a group all using the group account.

For me first BSM basket locking is still 2 hours after Asia open, others are trading news or other locking times.
It sometimes doesn't generate a basket and on demo i would try a one hour before Londen open lock just to see is it has potential.
Na Asia baskets on live account just means no trading that day for me.
info@metacharttools,com
  • #338
  • May 13, 2016 11:48pm May 13, 2016 11:48pm
Quoting skipper13
{image} please can you help me
There is a setup description here http://www.forexfactory.com/showthre...52#post8761252
The system has changed a bit of course but the basics are the same.
I will setup a new demo account and take you through it.


User Goldenequity gives another good way to trade here: http://www.forexfactory.com/showthre...49#post8350549
info@metacharttools,com
  • #339
  • Edited 1:51am May 14, 2016 1:22am | Edited 1:51am
Another quick wait to check correlations between pairs in a basket.

See that in this sell basket the NZDJPY and USDCAD had a negative correlation over the past hours/days (bsm settings # correlation bars).
Enter these pairs into the "uppercase comma separated list field" and hit enter.
check the correlation and see that one of the pairs has no place in the Sell basket.

The [CLOSE] or [DASH] button will get you back to the BSM dashboard.
Now if you think that the USDCAD does not belong in a sell basket click on the green tick to exclude that pair from the sell basket.

When working on basket selections make sure the baskets are locked or they will be updated while you are working on them.
If the [Lock] button is gray click on it so it says [Unlock] only then your baskets are locked.

Attached Image
Attached Image (click to enlarge)
Click to Enlarge Name: correl2.JPG Size: 131 KB
Attached Image
info@metacharttools,com
  • #340
  • Edited 3:55am May 14, 2016 2:03am | Edited 3:55am
If you do not want to exclude that USDCAD pair there is an option to trade it the opposite way by TTM.

Generate the complete basket (all green ticks) by clicking the [Combi] button.
Start the basket writer by clicking the button tat appears next to the [Combi] and after you have filled in the basket name you fill in USDCAD at
"Comma separated reversed pairs".

When you run TTM on the offline chart the button in front of USDCAD will be red showing you this pair will be traded in a different direction than the other 10.
Attached Image (click to enlarge)
Click to Enlarge Name: correl4.JPG Size: 147 KB
Attached Image
info@metacharttools,com
0 traders viewing now