Need expert advisor for this Indicator (SSRC.ex4) | Forex Factory

Options

Permalinks
Print Thread

Similar Threads

Can anyone fix the alarm in this ssrc indi? 0 replies

Need Expert Advisor 1 reply

Need help with an MT4 Expert Advisor 2 replies

Need help creating Expert Advisor 0 replies

Attachments: Need expert advisor for this Indicator (SSRC.ex4)
Exit Attachments

Need expert advisor for this Indicator (SSRC.ex4)

  • #1
  • First Post: Nov 17, 2012 10:57am Nov 17, 2012 10:57am
Hi to all
I have traded in demo for the last week using only one indicator . it is the SSRC.ex4 indicator and it is in the attched file. It is your friend because it is trend friend. I hopw some expert coder who can convert it to an expert advisor. Can anybody help. Thanks
Attached File(s)
File Type: ex4 SSRC.ex4   9 KB | 1,824 downloads
  • #2
  • Nov 17, 2012 3:21pm Nov 17, 2012 3:21pm
Quoting naser_mohamm
Hi to all
I have traded in demo for the last week using only one indicator . it is the SSRC.ex4 indicator and it is in the attched file. It is your friend because it is trend friend. I hopw some expert coder who can convert it to an expert advisor. Can anybody help. Thanks
How do you use it? Do you use the default parameters?
  • #3
  • Nov 19, 2012 8:41pm Nov 19, 2012 8:41pm
Quoting naser_mohamm
Hi to all
I have traded in demo for the last week using only one indicator . it is the SSRC.ex4 indicator and it is in the attched file. It is your friend because it is trend friend. I hopw some expert coder who can convert it to an expert advisor. Can anybody help. Thanks
Dear brother Naser

I attached you the expert in the Frist place you put your request in

Please check it again ..
  • #4
  • Nov 24, 2012 8:57am Nov 24, 2012 8:57am
Quoting IAEBusiness
Dear brother Naser

I attached you the expert in the Frist place you put your request in

Please check it again ..
Sorry Bro
But where is it ? I did not find it..
Thanks for sharing with you...
  • #5
  • Dec 26, 2012 12:47pm Dec 26, 2012 12:47pm
Quoting naser_mohamm
Sorry Bro
But where is it ? I did not find it..
Thanks for sharing with you...
It's in AljazeeraFx

I try to send you a privet message, put it's not allowed to you yet
  • #6
  • Mar 20, 2013 1:27am Mar 20, 2013 1:27am
Quoting IAEBusiness
Dear brother Naser

I attached you the expert in the Frist place you put your request in

Please check it again ..
Hello, im also looking for an ea base on the ssrc indi(was looking for this a long time, even paid to have one made with no success, keep missing trades etc)
can you help with fixing the bugs in the one that i have? or a copy of yours, thanks.
  • #7
  • Mar 20, 2013 9:18pm Mar 20, 2013 9:18pm
I just want to say that I have had an awesome experience with an mq4 programmer whom has extraordinary programming skills.

I think just about anything he can do!

If anybody is interested just pm me and I will pm you back with the details!
  • #8
  • Mar 21, 2013 10:34am Mar 21, 2013 10:34am
This trading system looked interesting, but the indicator repaints, so the ea based on it cannot function good. If you want an ea, you must fix the indicator first. The indicators source code is needed first!
  • #9
  • Nov 23, 2013 11:16am Nov 23, 2013 11:16am
Hi naseer have you got ssrc auto indicator please reply ...
  • #10
  • Feb 5, 2016 2:39am Feb 5, 2016 2:39am
Hi there did any body able to get the source code on the SSRC indicator or able to make it into an EA please let me know .


Best Regards.
  • #11
  • Oct 5, 2016 5:11pm Oct 5, 2016 5:11pm
This is an alert in a ssrc I found.....the alert is not working right.... It looks like stuff is in the wrong place and missing some stuff. 0 && 0.9 is different for sell vs. buy....also [SIGNAL_BAR+1] >= 0) is missing a - 0.9

I think it's only ringing as it goes up and breaks + .9 at the top....that's wrong...... it should ring after it goes up top and falls down past +.9 ...ring!!!...and vise versa

It looks like the problems are in those two highlighted lines but I'm not sure

Anyone have any idea why it's not working right?

Here's the indicator attached. This one has been fixed.....it doesn't bog down your pc.......it works good other than the alert.

Here's the secret to using this indicator. Be sure H4, H1, M15 are matching....two will usually be down and one of the tf's will be dropping. Use a cci 23.....when it get's close to the 100 for a long....-100 for a short....go in! this indy pays!!! Yes it repaints! but it still works in real time.


if(PrevSignal <= 0)
{
if(SRCBuffer[SIGNAL_BAR] - 0.9 >= 0 && 0.9 - SRCBuffer[SIGNAL_BAR+1] >= 0)
{
PrevSignal = 1;
Alert("SSRC lvl 0.9 (", Symbol(), ", ", Period(), ") - SELL!!!");
}
}
if(PrevSignal >= 0)
{
if(SRCBuffer[SIGNAL_BAR+1] + 0.9 >= 0 && Â SRCBuffer[SIGNAL_BAR] + 0.9 <= 0)
{
PrevSignal = -1;
Alert("SSRC lvl 0.9 (", Symbol(), ", ", Period(), ") - BUY!!!");
Attached File(s)
File Type: mq4 SSRC_Alert.mq4   7 KB | 1,186 downloads
  • #12
  • Oct 6, 2016 12:46am Oct 6, 2016 12:46am
Quoting cugir321
This is an alert in a ssrc I found.....the alert is not working right.... It looks like stuff is in the wrong place and missing some stuff. 0 && 0.9 is different for sell vs. buy....also [SIGNAL_BAR+1] >= 0) is missing a - 0.9 I think it's only ringing as it goes up and breaks + .9 at the top....that's wrong...... it should ring after it goes up top and falls down past +.9 ...ring!!!...and vise versa It looks like the problems are in those two highlighted lines but I'm not sure Anyone have any idea why it's not working right? Here's the indicator...
Hello cugir321!

Since I couldn't find the error in the code, I have let it run, and as I see, it works as it should.

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 530 KB


Gorraf
  • #13
  • Oct 6, 2016 7:36am Oct 6, 2016 7:36am
Quoting cugir321
Really? Myself and a friend ran it on two different systems /platforms and it didn't ring at the bottom - .9 (coming up through it)....and call it a buy. It rang at the top .+9 (coming from the bottom up thru it) and called it a sell. And vise versa coming down. Interesting that it runs on your machine like I described...rings at the -.9 as it comes up through it and calls it "buy"
Whoops.

I guess I checked your question before I drank my coffee.

Check the indicator with this modification:

if(PrevSignal <= 0)
{
if(0.9 - SRCBuffer[SIGNAL_BAR] >= 0 && SRCBuffer[SIGNAL_BAR+1] - 0.9 >= 0)
{
PrevSignal = 1;
Alert("SSRC lvl 0.9 (", Symbol(), ", ", Period(), ") - SELL!!!");
}
}
if(PrevSignal >= 0)
{
if(SRCBuffer[SIGNAL_BAR+1] + 0.9 <= 0 && SRCBuffer[SIGNAL_BAR] + 0.9 >= 0)
{
PrevSignal = -1;
Alert("SSRC lvl 0.9 (", Symbol(), ", ", Period(), ") - BUY!!!");
  • #14
  • Edited 7:52am Oct 6, 2016 7:37am | Edited 7:52am
Really? I know the buy and sell is reversed in the text window. Myself and a friend ran it on two different systems and it didn't ring at the bottom - .9 (coming up through it)....and call it a buy. It rang at the top and called it a sell. And vise versa coming down.

Interesting that it runs on your machine like I described...rings at the -.9 as it comes up through it and calls it "buy"

The purpose is the find the H4, H1, M15 matched on the ssrc 40/60 than trade that direction ...usually two of the tf's will be matched already. When the third one starts to move....look for the 23 cci to hit 100....enter. So the bell needs to ring as soon as it starts moving up....at .-9...the break of -.9 is not what will determine the entry...it's the cci near 100

The key is to find two of the three tf's matched....then set the alarm on the third one that's not....when it rings at -.9....go to cci 23 and watch for it to come close to 100....with good angle. This is really an amazing system.

This indicator repaints very little with the 40/60 setting. And when all the tf's are matched I've not seen it repaint on the higher tf's....
  • #15
  • Oct 6, 2016 7:49am Oct 6, 2016 7:49am
Quoting Gorraf
{quote} Whoops. I guess I checked your question before I drank my coffee. Check the indicator with this modification: if(PrevSignal <= 0) { if(0.9 - SRCBuffer[SIGNAL_BAR] >= 0 && SRCBuffer[SIGNAL_BAR+1] - 0.9 >= 0) { PrevSignal = 1; Alert("SSRC lvl 0.9 (", Symbol(), ", ", Period(), ") - SELL!!!"); } } if(PrevSignal >= 0) { if(SRCBuffer[SIGNAL_BAR+1] + 0.9 <= 0 && SRCBuffer[SIGNAL_BAR] + 0.9 >= 0) { PrevSignal = -1; Alert("SSRC lvl 0.9 (", Symbol(), ", ", Period(), ") - BUY!!!");

And I missed your second post! sorry.

I'll check it...thank you very much!
  • #16
  • Edited 10:59am Oct 6, 2016 9:08am | Edited 10:59am
No, not ringing....letting it run on the 1 min.....it came down over + .9 from the top and did nothing. Should have said .9 sell.
  • #17
  • Edited 4:52pm Oct 6, 2016 10:59am | Edited 4:52pm
There must be something unusual about putting an alarm on this indicator....I've tested all types and nobody can get it so it fires the alarm when it breaks from the bottom -.9 coming up ....(the lower -.9) (or the top +.9 coming down) and prints it in the text window.

The important part is that it needs to ring the alarm when it starts moving up......the other two tf's are already up on the ssrc 40/60. (Use H4, H1, M15...they are quarter tf's of each other). Then go to the cci 23 when the last tf starts moving up (the last sscr to move up can be any of the the three).... then watch for the move at 100 cci. You don't have to worry about the last ssrc tf changing back down at trade time because if it does the 23 cci will usually not get to the 100 line or shoot over it....or it may be coming back down over the 100 cci line for a retrace.

Back test this! Prove me wrong! Yes this indicator repaints...but very little on the 40/60 setting. What you see in back testing will be very similar in real time.... This 40/60 setting is a multiday trend setting.....the 14/21 setting is a single day trend setting. The 40/60 is by far the best for any trading! (if you use lower tf's you're probably wasting your time and you will see repainting) Look at it ...mark the tf's where it matches....you tell me! Then watch it in real time! When all the ssrc tf's are up (the last tf moving up)....you'll see the trades as the cci 23 swings up to 100.

Do not use the indicator at the beginning of this thread. It will slow down your pc to a halt. SSRC_alert.mq4 has been fixed by the Russian's I believe (and you thought all russians were bad as per Cankles)....it's fixed... Why he did the alarm like this I don't know.....it can be too late at times for the big run. I still love this man like a brother for fixing the slow down stuff!

If you can fix the alarm, save it and post the whole indicator....please....thanks.
  • #18
  • Oct 6, 2016 5:52pm Oct 6, 2016 5:52pm
I fixed it so it will ring at 0 going up and down......changed all the .9's to .01
It's better than the other but still a little later than I wanted.
Also it doesn't ring until the open of the next candle....anyone know how to make it ring when it hits....not delayed. That would make it ring a little sooner. I don't care if it keeps ringing as it moves back and forth over .01....I can turn it down.

Still would like it ringing at - .9 coming from the bottom up for a long...and vise versa for a short. I don't have a clue how to do it.....I'm guessing I need to change the reference point for the line going up or down...which is 0. I believe it hits 0 then rings when it hits .01...on close of candle.

Here's the fixed indicators for anyone who wants to try them...use price construction 6 (it's smoother).....and 40/60....or 14/21 for settings
Attached File(s)
File Type: ex4 SSRC_Alert fix.ex4   20 KB | 1,165 downloads
File Type: mq4 SSRC_Alert fix.mq4   7 KB | 1,441 downloads
  • #19
  • Aug 4, 2020 12:54pm Aug 4, 2020 12:54pm
Hi was anyone able to code an EA using SSRC indicator? How much would such an EA cost if it were for sale?
  • #20
  • Last Post: Sep 8, 2020 9:46am Sep 8, 2020 9:46am
Hello to all! Hoping your are well and safe. I have posted a few times, not very active but enjoy reading. At this time, I have been using SSRC.ex4 but find that it needs to be "refreshed" from time to time. I do not know how to code, but think if a "refresh command" could be added, it may help. Appreciate if anyone would be able to illustrate how to add a "refresh command" and "time interval" in "X variable seconds" to this ssrc. I need to learn to code. Will be doing so. Thankx for whoever may have an example!!
0 traders viewing now