Renko Bounce Trade

Quoting OldHand

Disliked

{quote} Thank you that was real quick, but it seems the saga continues - attached is the result of following your instructions. Why? I'm totally screwed - truly! Thank you for your patience... maybe i am simply to screwing old (80) but I dont feel it that is why i get so annoyed that I can not get this to work! Cant get offline chart to show any Renko or other price line. {image}

Ignored

Quoting MathTrader7

Disliked

{quote} Now, try to reduce the size of Renko bricks to something like 3 pips (not 50 pips!). I suspect that there is not enough M1 history data downloaded on your MT4 platform.

Ignored

Quoting OldHand

Disliked

{quote} Thank you - from the screen drop you will see it is now different - Please tell me the following... 1. The "offline Chart" is working in unison with the on line chart is that correct? Is it not supposed to be off line? 2. Assuming I get this going, must the offline chart remain open? 3. Assuming I get this going - can I than put the EA on a ... say 4 hour chart? 4. Can I make a template of this and put the template on other pairs or must this procedure be followed for each pair separately? Again, I am grateful to have found someone with...

Ignored

Quoting OldHand

Disliked

{quote} Sorry wrong screen drop - don't know why no, It continues to load an empty chart - however on my platform I have data - tried to get as much as possible, but will only give me about 18 hrs. Dont know why it will not copy the screen onto the post {image}

Ignored

Quoting MathTrader7

Disliked

{quote} The screenshot you attached shows that you have set the Renko brick size to 50 pips! Please close all the charts first, then open a M1 chart, attach the Renko builder EA to, and in the input settings of the Renko builder EA set the Brick size to 3 pips. Then open the offline chart, zoom into it, capture a screenshot and post it.

Ignored

Quoting 2george

Disliked

Is the 'allow dll imports' ticked on your renko indi? This is under the 'common' tab on the indi. Here are two indicators that work OK - the range bar indicator is the better of the two as it does not 'freeze' the charts. I have also attached a script indi 'load all history'. Remember to load it into your MT4 scripts folder and attach it to the 1m chart and let it load the history first. Then load the indicator to the 1m chart (tick dll) and change the range to 5 before opening the offline M2 chart. George {file} {file} {file}

Ignored

Quoting 2george

Disliked

Download them as normal into your downloads folder, then copy and paste. The loadhistory exe is pasted into the scrips folder of MT4. If this is not working then, not being a technical guy, I hope someone else will know the answer. I am downloading windows 10 this morning so if there are difficulties then I may need some help too!! George

Ignored

Quoting OldHand

Disliked

{quote} Hello George, Thank you for the indicators, Please instruct me how to load an EX4 file into my indicator folder. can not copy and paste - what other method please? Thank you, Old hand

Ignored

Quoting Rezzamania

Disliked

Hey all.... I just got done reading the entire thread and I have been working on a renko strategy using 20 pip bars on median renkos...EU I take for 50 pips all day long and any GBP pairs I take for 100 pips. I am attaching a pic to give you all an idea of what I am doing.... {image}

Ignored

Quoting Rezzamania

Disliked

Hey all.... I just got done reading the entire thread and I have been working on a renko strategy using 20 pip bars on median renkos. I use TDI to confirm entry points when the pair is over bought and over sold. I also use supply and demand boxes for 2nd confirmation and Fisher Transform for 3rd confirmation and divergence. The entry off TDI MUST BE AFTER the cross of RSI and the Signal Line!!! It is spot on and the runs are great.... EU I take for 50 pips all day long and any GBP pairs I take for 100 pips. I am attaching a pic to give you all an...

Ignored

Quoting MathTrader7

Disliked

{quote} The screenshot you attached shows that you have set the Renko brick size to 50 pips! Please close all the charts first, then open a M1 chart, attach the Renko builder EA to, and in the input settings of the Renko builder EA set the Brick size to 3 pips. Then open the offline chart, zoom into it, capture a screenshot and post it.

Ignored

Quoting tkhan011

Disliked

Hi How do i get my renko chart to look like this, i.e painting a new brick side by side with the last brick if the new brick is moving in the opposite direction, and not a whole brick higher or lower than the last brick Please ignore the 'multiple brick reversal' part in the attached chart {image}

Ignored

Quoting MathTrader7

Disliked

{quote} Download Version 1.46 of the non-gap Renko builder EA from here. {image}

Ignored

Quoting MathTrader7

Disliked

{quote} Download Version 1.46 of the non-gap Renko builder EA from here. {image}

Ignored

Quoting tkhan011

Disliked

{quote} Thank you! much appreciated! Also, i have a question Why does a new renko brick only form when its the defined number of pips below/above, depending on whether it's a long or short order, the close of the current brick and not price? Like for example i've set the brick size=10, even though price has moved 10 pips below/above the close/open price of the last brick, it just forms a wick, and it takes another 20 pips to form a new brick, so thats 10+20=30 pips below , why doesn't a new brick form if price has already moved 10 pips in the opposite...

Ignored