As simple as possible: 00 level trading | Page 1660 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

SIMPLE EA for a simple method needed!! 2 replies

As simple as possible: RENKO M5 trading 75 replies

Trading is this Simple? Finally Explained simple and clearly! 46 replies

Simple Level Trading 1 reply

Trading: As simple as possible, but no simpler - by a real Cityboy 92 replies

Attachments: As simple as possible: 00 level trading
Exit Attachments

As simple as possible: 00 level trading

  • #33,181
  • Nov 15, 2015 2:14am Nov 15, 2015 2:14am
Quoting POC-Trader
{quote} The way I understand it unless I am wrong and please someone correct me if I am wrong: You are on the H1 chart. Clock is 09h58. You wait till new candle. Clock now 10h00 and candle close and a new candle start You set a Pending order just points above for a BUY or points below for a SELL of the next 000 line. IOW, pair is now at EURUSD 1.07685 You want to put in a BUY You set pending order for 1.07705 (I think rule is to go for exactly 1.07700, but I like to go slightly higher then I am sure it cross the line. That is the first 000 for the...
Wrong.
  • #33,182
  • Nov 15, 2015 9:37am Nov 15, 2015 9:37am
Quoting ericjschroed
{quote} Wrong.
Oh. Maybe thats why this system doesn't work for me.
  • #33,183
  • Nov 15, 2015 4:27pm Nov 15, 2015 4:27pm
Quoting ericjschroed
{quote} Wrong.
What is right=?
  • #33,184
  • Nov 15, 2015 10:44pm Nov 15, 2015 10:44pm
Anyone know how to get the forex supreme meter running... Id like to try it with the 00 system like robinho was showing... But I keep getting this message

"Some currency pairs are not available
for calculating the indices.
:EURUSD:GBPUSD:AUDUSD:USDCHF:USDCAD:EURJPY:GBPJPY:NZDUSD:AUDJPY:CHFJPY:NZDJPY:CADJPY
Calculation formula will be changed."

I added the prefix for my pairs ecn(EURUSDecn) to the prefix area.. but still nothing... Ive spent the last 3 hours trying to get this.. I know its something simple but im sure stuck... Thanks
  • #33,185
  • Nov 15, 2015 10:47pm Nov 15, 2015 10:47pm
Quoting mtbb
Anyone know how to get the forex supreme meter running... Id like to try it with the 00 system like robinho was showing... But I keep getting this message "Some currency pairs are not available for calculating the indices. :EURUSD:GBPUSD:AUDUSD:USDCHF:USDCAD:EURJPY:GBPJPY:NZDUSD:AUDJPY:CHFJPY:NZDJPY:CADJPY Calculation formula will be changed." I added the prefix for my pairs ecn(EURUSDecn) to the prefix area.. but still nothing... Ive spent the last 3 hours trying to get this.. I know its something simple but im sure stuck... Thanks

Make sure all currency pair symbols are enable on MT4 platform
  • #33,186
  • Nov 15, 2015 10:50pm Nov 15, 2015 10:50pm
Quoting mtbb
Anyone know how to get the forex supreme meter running... Id like to try it with the 00 system like robinho was showing... But I keep getting this message "Some currency pairs are not available for calculating the indices. :EURUSD:GBPUSD:AUDUSD:USDCHF:USDCAD:EURJPY:GBPJPY:NZDUSD:AUDJPY:CHFJPY:NZDJPY:CADJPY Calculation formula will be changed." I added the prefix for my pairs ecn(EURUSDecn) to the prefix area.. but still nothing... Ive spent the last 3 hours trying to get this.. I know its something simple but im sure stuck... Thanks
try to use this file-
Attached File(s)
File Type: mq4 ForexProfitSupreme Meter(2).mq4   40 KB | 453 downloads
  • #33,187
  • Nov 15, 2015 10:50pm Nov 15, 2015 10:50pm
Quoting mtbb
Anyone know how to get the forex supreme meter running... Id like to try it with the 00 system like robinho was showing... But I keep getting this message "Some currency pairs are not available for calculating the indices. :EURUSD:GBPUSD:AUDUSD:USDCHF:USDCAD:EURJPY:GBPJPY:NZDUSD:AUDJPY:CHFJPY:NZDJPY:CADJPY Calculation formula will be changed." I added the prefix for my pairs ecn(EURUSDecn) to the prefix area.. but still nothing... Ive spent the last 3 hours trying to get this.. I know its something simple but im sure stuck... Thanks
Try rightclick on Marketwatch window (standard left top) and SHOWALL.
I think that will work.
  • #33,188
  • Nov 15, 2015 11:31pm Nov 15, 2015 11:31pm
Quoting ppuruswani
{quote} Make sure all currency pair symbols are enable on MT4 platform
"Try rightclick on Marketwatch window (standard left top) and SHOWALL.
I think that will work."
I had already done this.. but tried it again--still nothing

ppuruswani and poc-trader... all the pairs are showing in my market watch.. plus have them all up as working windows... Do i need to do something else other then that?

I tried using the file you posted ppcuruswani.. but i got the same message
"Some currency pairs are not available for calculating the indices. :EURUSD:GBPUSD:AUDUSD:USDCHF:USDCAD :EURJPY:GBPJPY:NZDUSD:AUDJPY:CHFJPY :NZDJPY:CADJPY Calculation formula will be changed."

It almost seems like the problem is the indicator isnt seeing my pairs cause they have ecn in them... Its saying its looking for EURUSD.. But my market watch list shows EURUDSecn... I put the ecn into the prefix area-- but its acting like its not working... Its showing all those pairs as not available... But i have every one of them in my market watch screen and up and running in a chart...
  • #33,189
  • Nov 15, 2015 11:36pm Nov 15, 2015 11:36pm
Quoting mtbb
{quote} "Try rightclick on Marketwatch window (standard left top) and SHOWALL. I think that will work." I had already done this.. but tried it again--still nothing ppuruswani and poc-trader... all the pairs are showing in my market watch.. plus have them all up as working windows... Do i need to do something else other then that? I tried using the file you posted ppcuruswani.. but i got the same message "Some currency pairs are not available for calculating the indices. :EURUSD:GBPUSD:AUDUSD:USDCHF:USDCAD :EURJPY:GBPJPY:NZDUSD:AUDJPY:CHFJPY :NZDJPY:CADJPY...

can you try this file-

make sure you should define- EURUSSecn,AUDUSDSecn etc......
Attached File(s)
File Type: mq4 ForexProfitSupreme Meter_Robinho_12.mq4   40 KB | 433 downloads
  • #33,190
  • Nov 15, 2015 11:42pm Nov 15, 2015 11:42pm
Quoting ppuruswani
{quote} can you try this file- make sure you should define- EURUSSecn,AUDUSDSecn etc...... {file}

that is the file i have been using... i get the same response with that file too... Where would i define the EURUSDecn? The only option i see is under the prefix option and i tried doing both ecn and EURUSDecn and neither of them worked... Crazy...
  • #33,191
  • Nov 16, 2015 12:01am Nov 16, 2015 12:01am
Quoting mtbb
{quote} that is the file i have been using... i get the same response with that file too... Where would i define the EURUSDecn? The only option i see is under the prefix option and i tried doing both ecn and EURUSDecn and neither of them worked... Crazy...

i change the coding- try this-
Attached File(s)
File Type: mq4 ForexProfitSupreme Meterecn.mq4   40 KB | 438 downloads
  • #33,192
  • Edited 12:45am Nov 16, 2015 12:05am | Edited 12:45am
that sort of worked--- the power meter wasnt working..... though that made me think-- hey i can go into the mql file and see if i can edit it myself -- i did and now it works... though THANKYOU PPURUSWANI AND PRO-TRADER.. without you guys i would have been stuck... \_/ A beer for both you guys


Though one last question.. any idea how can i get it to spread out.. YOu can see that the meter is getting squeezed both over and cant really see the levels in it...

Attached Image
Attached File(s)
File Type: mq4 ForexProfitSupreme Meter_Robinho_121.mq4   40 KB | 661 downloads
  • #33,193
  • Nov 16, 2015 2:11am Nov 16, 2015 2:11am
Quoting FriendTrend
{quote} What is right=?
It sounds like the previous poster is just entering blind at the beginning of the hour which is NOT how this system is designed. If you are on M30, you have 2 bars you could enter on, and if M15, 4 bars, if and when you get a signal. It's all there starting on Page 1.
  • #33,194
  • Edited 2:30am Nov 16, 2015 2:17am | Edited 2:30am
That'll tell you ... earn 1% of the bill in less than 10 minutes and go back to sleep

Friends ... just a tip for those who will use force on its inputs, there is no problem if the couple is in H1, M30, M15 and M5 ... the force is the same ... just make sure to M30 or M15 are ok with indicators (Udine rule) ... and see the price action in M5 ...
Attached Image (click to enlarge)
Click to Enlarge Name: 16 11 eurjpy audjpy.png Size: 112 KB
  • #33,195
  • Nov 16, 2015 3:25am Nov 16, 2015 3:25am
Quoting ericjschroed
{quote} It sounds like the previous poster is just entering blind at the beginning of the hour which is NOT how this system is designed. If you are on M30, you have 2 bars you could enter on, and if M15, 4 bars, if and when you get a signal. It's all there starting on Page 1.

Why do you say that?

See Post #1, Post #56 and complete page 1 with screen shots. And Word Doc.
The rules according to UDINE say that you trade ONCE per H1 bar if you are on H1 chart and not more.
If you do go to other timeframes ie M15, you can trade 4 times in one hour.

Besides following all the other rules ie not trading 1 hour before the news etc, etc, etc......

But the question was how to trade RULE 2....the first trade on 000. That is how I explained it as how I understood it to be from UDINE's screenshots.
Trades were take exactly on the 000 ie xxxx500. See Page 1. And I realise I might be wrong.....

PLEASE, if you know that someone is wrong, it is only polite to explain why you say that with an explanation. Don't let people hang in the middle and waste time just because you wasted time in the beginning.
To always say "go and read 1660 pages because I had to" is also not polite. I see it too often in these threads.

Lets all try and help each other and be nice to each other. (Or is it a competition or commercial interests that takes preference?)

I like Robinho's attitude. Always willing to help.
  • #33,196
  • Nov 16, 2015 3:29am Nov 16, 2015 3:29am
Quoting Robinho
That'll tell you ... earn 1% of the bill in less than 10 minutes and go back to sleep Friends ... just a tip for those who will use force on its inputs, there is no problem if the couple is in H1, M30, M15 and M5 ... the force is the same ... just make sure to M30 or M15 are ok with indicators (Udine rule) ... and see the price action in M5 ... {image}
Thanks Robinho
I made 47,4 Pips this morning following your rules with a few titbits from UDINES rules like H1 and D match,etc. (not the 000 level rules, but rather Support and Resistance)
  • #33,197
  • Nov 16, 2015 3:41pm Nov 16, 2015 3:41pm
Quoting ericjschroed
{quote} Kinda curious why you didn't enter at 1.0065 which is the next level above the previous candle. That would have prevented the loss.
Hey Eric,

Human error, it was indeed the level I wanted to go for, but I was too late and got carried away thinking that it would make a TP anyway...

LuXing
Wisdom begins in wonder
  • #33,198
  • Nov 16, 2015 3:43pm Nov 16, 2015 3:43pm
Quoting Robinho
That'll tell you ... earn 1% of the bill in less than 10 minutes and go back to sleep Friends ... just a tip for those who will use force on its inputs, there is no problem if the couple is in H1, M30, M15 and M5 ... the force is the same ... just make sure to M30 or M15 are ok with indicators (Udine rule) ... and see the price action in M5 ... {image}
Great stuff Robinho

Earn 1% of the bill in less than 10 minutes and DONE FOR THE DAY !!!!

LuXing
Wisdom begins in wonder
  • #33,199
  • Nov 16, 2015 3:49pm Nov 16, 2015 3:49pm
Many trades today, but my absolute favourite was the following:
AUDJPY to TP

Grand total at "Close of Business" (London Close): +8.52%

LuXing
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 46 KB
Attached Image
Wisdom begins in wonder
  • #33,200
  • Nov 16, 2015 9:19pm Nov 16, 2015 9:19pm
Quoting LuXing
Many trades today, but my absolute favourite was the following: AUDJPY to TP Grand total at "Close of Business" (London Close): +8.52% LuXing {image} {image}
Well done and inspiring as usual !
Keep showing it can be done until it's simply obvious.
10 traders viewing now